I'm fairly new to action script so I think this is a basic question. I need to get a movie clip in my library to play on stage after a hit-test, then I need it to be removed after it plays. I have to hit-test working,
View 3 RepliesI have a very simple fla i built, all i need is the hover "over" stage to play this tween. On the keyframe I made it a symbol, movie clip. In there all the tweens are set exactly. It seems if you wanted motion on a stage,you would just put that clip on the over stage. I uploaded the fla file: [URL]
View 6 RepliesI'm trying to make a short clip = a website introduction - where feathers fall from above the stage eventually covering it completely. I've created movie clip with the animation (motion via motion tweens) - and what I'd like is for multiple instances of the Movie Clip to appear above the stage, then the Movie Clip to play, hence feathers falling randomly.I'd also like to put a time delay on the appearing of each new instance (ideally random) so that when the movie clip plays the falling feathers aren't perfectly synchronised (which they would be were all the instances to appear at the same time).I've tried playing with the scripts suggested in this thread with limited success: showthread.php3?t=259911(Also, I'd ideally like to change the tint on each movie clip (to a limited set of colours) instance to vary the colour of the feathers, but that's maybe a complication too far for the moment!
View 5 Replieswell, I got this for my Play/Pause button (on stage):
Code:
import mx.transitions.Tween;
btn_play.onPress = function(){
[code].....
I'm trying to get my flash movie so that it pauses when the mouse is over the movie and continues when the mouse is not over the movie during certain segments of frames in my movie clip. So basically I need some code that executes this: if the mouse is over the stage between frame 25 and 45 pause the movie until the mouse leaves the stage or the next or back buttons are selected.
View 1 RepliesI want a movie clip (let's call it homecontent_MC) with 100 frames play to frame 80 and stop.Then when someone clicks a button on the navigation bar (home, about, services, contact, etc...) homecontent_MC would then begin playing from it's position (frame 80) til it reaches 100, at which point it wouldn't be on screen, and the movie clip that corresponds to the navigation button press (say services_MC...) would start from frame 1 and continue til it stops at it's frame 80...
View 7 RepliesI have five different scenes all including three different buttons. When I test the buttons in "play scene" - all buttons sounds correctly in all scenes. But when I play movie, there is sound only with one button (the same button in every scene). I have looked for differences, but this button seem to have all the same parameters as the others.
View 10 RepliesI am creating a site, and it has a animation that it has to play before loading the next section. What I cant figure out is what function I need to create so that when a user clicks on the vision button it will play the frame after stop(); which will close that section, then have it load the frame for the section that the person clicked on. The only way I can think of doing this is creating 3 different close animations for the three sections. But I figure there has to be a way to have it play the one close animation and then goto the frame which is the portfolio section or vision section (depending on the button clicked).
View 1 RepliesI am creating a site, and it has a animation that it has to play before loading the next section. What I cant figure out is what function I need to create so that when a user clicks on the vision button it will play the frame after stop(); which will close that section, then have it load the frame for the section that the person clicked on. The only way I can think of doing this is creating 3 different close animations for the three sections. But I figure there has to be a way to have it play the one close animation and then goto the frame which is the portfolio section or vision section (depending on the button clicked).
View 1 RepliesI have 4 movies that need to be loaded in sequence. The first movie loads the second one, the second one loads the third, then the third one loads the fourth. What I can't figure out is how to make sure there's only one movie loaded at any time. I've tried removeChildAt(0) and other methods. What's the best way to load a movie to the stage and wipe out what was on the stage?
View 4 RepliesI have drawn a pecked line route, sitting on its own layer, using flash tools, over a base map. I have then gone Insert>Symbol>movie and I now need to get a copy of this route into the movie's white area. I expected perhaps when right clicking on the layer, an option called copy to movie and an ability to select the movie name.
View 2 Repliesim using this code for my movie to pause for a certain time and then it play every after 5 seconds
stop();
var nInterval = setInterval(Play, 5000);
function Play() { clearInterval(nInterval); gotoAndPlay(_currentframe+1);}
[code].....
I have a flash banner that includes a movie clip of the logo being animated. I want the logo animation to only run at the beginning of the main "movie". Currently I have to find the length of the entire movie (for ex. 500 frames) then put a key frame in at the 500th frame of the logo movie clip. I know there has to be a correct way to do this...Do I add a frame name at the end of the main timeline and somehow in AS in the logo movie clip say "when you reach X goToAndPlay(1);"?
View 1 Repliesi'm trying to play several movie clips, one after the other from one main movie clip.i've got 8 movie clips, "m1.swf", "m2.swf", etc. "m8.swf", and one main movie clip, "play.swf".i've tried using loadMovie, but it only plays the last movie clip. this is what i've got. in the main movie clip, i've put a play button, and the actionscript i have in the button is:
on(release)
{
this.loadMovie("m1.swf",play);
//this.unloadMovie("m1.swf");[code]....
is this wrong? how can i get this to work correctly.
I have my flash document set up in the following way: On the main timeline I have my buttons that I want to play movie clips embedded inside a movie clip on the main timeline.However, when I click each different button, the current movie clip stops playing and then the movie clip corresponding to the button plays.
I want them all to be able to play at once. So for example you push button 1 and the alien plays, but half way through you could click button 2 and the alien clip would keep playing, but also the helicopter clip would begin to play as well.Here is the code I have so far:
building_btn1.addEventListener(MouseEvent.CLICK, alien);
building_btn2.addEventListener(MouseEvent.CLICK, helicopter);
function helicopter(e:MouseEvent):void {[code]......
I'm trying to make a flash website that has clickable buttons that will play different movie clips. But I dont know how to make it to just play the movie clip with the button you click without playing all the movie clips on the main timeline.
View 1 Repliesgive me the actionscript for a bar that has a play and stop button to play and stop frames in a flash movie. i would be gratefull if you could as i am really stuck
View 2 Replieshow they make this reverse play animation...
the one that [URL] did on their previous site design...
I wouild like to Play a movie clip in a movie like once every 120 seconds. Are there actionscripts whichs does this? Using Flash MX....
View 3 RepliesI've created a simple movieclip (48 frames long). I want to play this movie on the stage. I created enough frames, but the movie doesn't play. I haven't used Flash for a real long time, so I'm probably missing something simple.
View 4 RepliesI have some (Eg. 10) Movie Clips on bottom of the Stage (aligned horizontally) with different sizes (different width & height). I want them to align vertically on middle of the stage with same gap (irrespective of their sizes) in between 2 Movie Clips. Is it possible using AS3 code?
View 3 RepliesI could code in movie clip by clicking on movie cilp on the stage but in As3 I could not do . Is this restricted to code on movie clip ?
View 7 RepliesI'm trying to reach a body of text which i turned into a movie clip which is on the main stage, and have it scroll up/down whenever it rolls over the designated hot spots. Here's what i have.
stage.addEventListener(MouseEvent.MOUSE_MOVE,down1,false,0,true);
function down1(e:MouseEvent):void {
if (mouseX>=0 && mouseX<=42 && mouseY>111.1 && mouseY<146.1) {
[code].....
I have a MC inside a button and I put in in the "Over" state how to make the MC play in reverse on mouseOut? Or is there a better or easier way of doing this?
View 1 Repliesi'm trying to play a movieclip from the library without having it on the stage..
View 12 RepliesMovieClip(mcName).play();
MovieClip(mcName).addEventListener(??????, myStopFunction);
Or how differently you can learn about the end of play?MovieClip is an external file and loaded into the swf as needed.
I need a MC 'A' to play on stage when the site starts. When any of the 4 out of 5 MC buttons in navigation is clicked, another MC should show instead of MC 'A' on the stage. Only when 1 MC button is clicked anything other than MC 'A' should disappear and MC 'A' should play. I wat to achieve this and trying to figure out how to best do this.
View 7 RepliesI have embedded a flv video onto the stage. I then have loaded in an image which is transparent enough to see the video through it. The problem is I cant now access the video player to control it. Is there anyway to bring the embedded video on the stage above the loaded in image so I can actually click play on the control bar and play the video?
View 3 RepliesI have an mc, that i need to have follow the mouse on the x axis.I have that just fine.But my problem is that i need a certain frame within the mc to play if the mouse is at a certain area of the stage.For example,if the mouse is at the x coordinate of 235 to the left, frame 2 of the movieclip will play. I uploaded just a test fla that i was practicing on.
View 5 Repliesmethood of telling the stage to continue playing in reverse, after a button is clicked, until it reaches a keyframe that will tell it to stop? I'm trying to make it so buttons will tell the stage to play a transition from beginning to end and then have it play in reverse when the "back" button is pressed. I'm currently searching online to find an answer but I haven't had any luck yet.
View 10 Replies