ActionScript 3.0 :: Loading Large SWF Files Into A Movie With A Preloader?
Aug 7, 2009
At the moment, I am loading an external SWF file into my movie. The swf file contains a large FLV video... At the moment, I am using the code below, and the video is being loaded into a movie clip with the label "vid1"
_root.vid1.loadMovie("womanonbike4.swf");
The video loads fine. However, because it is such a large video, there is a delay. Can I PRELOAD the video during the main movie's Preloader?
So, my main movie starts, a preloader loads the entire main movie AND the external SWF file (womanonbike4.swf). Then, when the movie gets to the part of the main movie, where the external file is loaded, it will just play!
View 0 Replies
Similar Posts:
Oct 15, 2008
I'm building a flash based site for my photography in Flash CS3 with actionscript 2. The swf is almost 700kb so I guess I'll need a preloader right? I thought I could create a preloader scene before the main content scene and apply the following code to the single frame within the preloader:
Code:
ifFrameLoaded ("website", 3){
gotoAndPlay ("website", 1);
}
This doesn't seem to work as the large images in my gallery (contained within a movie clip) won't load unless you leave the gallery page then go back in?
View 3 Replies
Oct 21, 2004
So I've got a large movie (about 94k) that I need to preload. I used my usual Preloader script, which has been working great for me FOREVER and it just doesn't go! If I take out the movieclip with the images (yes they're optimized half to death) it loads fine. Main content is a movie clip on second frame of main timeline.There's a stop action on second frame of main timeline.[code]
View 7 Replies
Jul 28, 2009
I have recently "inherited" several websites that feature 1 to 10 minute video animations in SWF formatOne of my challenges is to get these files to appear or play in a timely manner so that the viewer does not loss interest as it is loading. My questions will start with file size.reduce or minimize the size of published SWF files while still maintaining high quality video output? Second, how about this business of preloading.I don't really understand that term but my thinking is that if a large movie could be loading while another, shorter, movie is playing, or a graphic displaying, that this could be useful in my case. Lastly, how about streaming in general. Are there ways to optimally use a given download speed to efficiently stream SWF video?
View 5 Replies
Sep 16, 2011
I'm trying to load a local file using FileReference load(). It will load small files just fine, but when I try to load a file of around 4-80 megabytes the flash player will crash. I read the load method officially supports up to 100 megabytes.
Here is the exact class I'm using to test:
ActionScript Code:
import flash.events.Event;
import flash.events.IOErrorEvent;
import flash.events.ProgressEvent;
import flash.net.FileReference;
import flash.net.FileFilter
[Code] .....
View 1 Replies
Oct 2, 2010
I'm having a problem loading a 3900 x 5300 PNG file into a movie clip. Is there a limit to the image dimension? When I tried loading smaller png files, it works.
View 1 Replies
Jun 11, 2006
[Code]...
Iam trying to create a preloader for my XML files loading to my project. This tutorail is working fine. but only for one file. I need to create one preloader for all my XML files(6 XML files loading in the first frame.)
View 3 Replies
Feb 2, 2011
I'm very new to flash and have a question for you wizards
I've created a simple slideshow displaying images which are being loaded from a XML file. I wish to have a preloader which displays the % loaded , if possible, while it's preloading the images from the xml file.
View 4 Replies
Jul 18, 2006
I was messing around with some old examples, and I ran into an unfinished example where several 30k-100k XML files are loaded and stored as a string into an Array. The code looks basically like:[code]Basically, when I trace the 'this', the order of the files that are loaded is off. Out of about 10 tries, about 3 times the order is perfect. The remaining 7 times, the order is a bit off. Does anybody have a suggestion on how to ensure the files are loaded prior to the next file being loaded? I tried placing a while loop that basically delays the clock for a few milliseconds, and that didn't work either. Besides, that is not really a good solution to arbitrarily waste clock cycles.
View 6 Replies
May 29, 2009
I have a preloader(as3) that is working great, I use FlashVars to pass it what movie it is loading, then it loads that movie, and shows it on the stage after loaded. I would like to make this a bit more dynamic. Right now I can use the same preloader for any movie so long as the movie and the preloader is the same size. I would like to pass the size of the movie im loading to the preloader with flashvars just like im passing it the file path for the movie itself. Here is how im passing the movie:
var swfLocation = this.loaderInfo.parameters.flashPath;
var myRequest:URLRequest = new URLRequest(swfLocation);
now i just access the variable wherever i want to say load the movie
I tried:
var swfHeight = this.loaderInfo.parameters.flashHeight;
var swfWidth = this.loaderInfo.parameters.flashWidth;
stage.stageHeight = swfHeight;
stage.stageWidth = swfWidth;
then in my flashvars i have a value of flashPath=<?=path?>&flashHeight=<?=height?>&flashW idth=<?=width?> (passing these to the embed and object using php btw)
View 2 Replies
Jul 11, 2009
I have created a very basic preloader using flash components 'Loader' and 'ProgressBar". It's job is to load an external swf movie clip/file.
Problem: When the preloader has finished doing it's 'thing', i.e. reaches 100%, it loads/or seeming reveals the external movie already underway i.e. not at the first frame.
I've read a few posts from "Whispers", and have concluded that the problem is that the movie is streaming whilst being loaded. And also that i need to be using "init" in regards to 'listener'.
However i really want to be able to apply this to the code i am using it, as i had just kinda gotten to grips with it (the code).
Is anyone able to tell me what a need to alter to get the preloader to finish loading the movie COMPLETELY before it starts to play.
------------
myProgressBar.mode = "manual";
myProgressBar.setProgress(0, 100);
myProgressBar._visible = true;
[Code]....
View 3 Replies
Sep 21, 2010
I like to play external preloader before it's load original movie index.swf. But I have a problem on resizing index movie. Sample files on link [URL].
Here is preload AS3 code:
package{
import flash.display.*
import flash.display.MovieClip;
import flash.net.URLLoader;
import flash.net.URLRequest;
[Code] .....
View 5 Replies
Feb 3, 2011
I've created a movie clip that contains several buttons that each load a separate movie clip when they are clicked. I would like to create a pre-loader for each of the separate movie clips because they will be rather large files when I finish adding content to them.
Below is the code I used to get the buttons load the movie clips. How to incorporate a pre-loader into this code
Code:
//##### My Code
var myLoader:Loader = new Loader();
addChild(myLoader);//first, the loaded clip is added to the stage wl
myLoader.x = 140;//then it is positioned
[Code].....
View 1 Replies
Mar 13, 2009
I have a main swf file in that i have an empty movie clip in which i want the external swf to load...i made buttons n i have given gotoAndPlay specific frame function for them and... wen it enters that specific frame i have given loadMovie function in actions layer for that specific frame... but i dont know how to make a preloader for that so that it loads the external swf..
View 2 Replies
Jan 29, 2003
I'm writing a preloader to load external movie clips but my function doesn't seem to be working properly. I call the function and it says that 100% is loaded and makes the movie clip thats showing the out put invisible...thats what supposed to happen except for the going to 100% straight away. the percent is being calculated properly but i think that the function is being executed before the new movie even starts to load...i've tried movieClip.onData but it doesn't seem to work..
Well heres the code
Code:
function loader() {
percentClip._visible = true;
targetClip._visible = false;
percent = 0;
[code]....
View 1 Replies
Jan 6, 2010
what I'm trying to do is make a preloader that will preload about 20 external SWF files before it lets you get to my main file. I want to do this because my main file needs the SWFs to be ready to go once its done loading. I have looked around and i found a few ways to do this with the "if (loadedBytes>=totalBytes)" and the code loops back till the files are done loading... this would be just what i need but i cant seem to get it to work. the file just seems to start loading my files but does not loop and just runs the time-line even once i state what frames i want it to loop.
View 6 Replies
Mar 30, 2008
I have created a preloader, and I want to tell the action script of the preloader once the file is done loading, put it away and load a new movie, or even a new flash file if i have to.here is the action script i have on the loader right now. Its just numbers counting from 1-100% and a .gif clip that plays but they are not connected in any way.
bytes_loaded = Math.round(_root.getBytesLoaded());
bytes_total = Math.round(_root.getBytesTotal());
getPercent = bytes_loaded/bytes_total;[code]...
Also, my preloader ends on Frame 3 and movie would start on frame 4.
View 1 Replies
Jul 10, 2009
In AC2, I am trying to load .swf files in to a movie.
I know how to load them, and I can load them at random. But what I want to know is, if I have say 500 movies, named movie_0.swf movie_1.swf movie_2.swf etc...
is there a way I can load them ten at a time, in order of highest number to lowest number. In a specific location.
In other words, I want to be able to have many external swf movies, about 400px wide by 100px tall, and load 10 at a time in to a 800px wide by 1200px tall movie, 10 movies at a time, in order of highest to lowest movie name number. Each in a specific place, with a next and precious button to show the next 10 or last 10.
Im basically working on my first site, and want to use something like this so I can show my latest articles first when someone clicks on the articles section of the website.
Now resolved with AS3
PHP Code:
var loaderone:Loader = new Loader();
loaderone.contentLoaderInfo.addEventListener(Event.COMPLETE, loadedone);
loaderone.load(new URLRequest(prefix + totalfiles-- + ".swf"));
function loadedone(one:Event):void
[Code].....
View 1 Replies
Feb 7, 2011
[[url]...The big Flash header is like 800kb, but for some reason, the default Flash preloader isn't working.
Two questions:
What's the best way to preload big bitmap graphics (Such as the scrolling bg; the android head)
How should I preload this movie, and why doesn't the default Adobe Flash preloader fire?
View 1 Replies
Sep 2, 2010
Im have 5 swf files that I want to play one after another on my home page.
I would like to have the first movie load and play and while that is going on have the others downloading in the background so they are ready to start when the first movie finishes.
After the 5th and last movie has played I would like it then to return to the first movie and just loop this process continually.
I have attached what I have at the moment which is a file called demand.fla that uses buttons to load in demand001, demand002, deamd003 etc.
Ideally i would like demand to load in each slide automatically and then have flashmove onto the next one after 5 seconds or so.
[URL}
View 2 Replies
Apr 7, 2002
Im loading several swf files into my main movie, How do I load the swf's and have them display like:
swf1 | swf2 | swf2.. and so on?
View 4 Replies
Oct 10, 2003
I can't seem to figure out how to load an external .txt file into my movie. I can get it to work onPress, but not for a frame script.
Anyone got a quick script to display an external .txt in a dynamic text box in flash?
View 1 Replies
Nov 8, 2011
how to display a preloader on a large movieclip loaded from the library? right now my app just freezes from the moment the load button is pressed until the movieclip finishes loading and appears on stage.When loading an external swf I use the contentLoader to get the loading info display a preloader. can someone paste an example code of a preloader on library movieclips?
View 1 Replies
Nov 15, 2007
I have been working on this script that currently loads 2 external files into two separate areas inside my application. the 2nd file loaded is supposed to have several buttons that control the 1st movie clip. Like go to next frame, etc. My problem now is the 2nd file loaded, is not controlling the 1st anymore ( i had this all sitting in one file before).
So the action script to load the files is;
Code:
this.myBtn.onRelease = function() {
//load render 1 into viewer
this._parent.viewer.createEmptyMovieClip("clipHold", this.getNextHighestDepth());
[Code]....
View 1 Replies
Sep 17, 2010
I've built loads of preloaders in AS2 before. However I never ecountered so many problems as now. I'm confused about many things with preloading in AS3. This is my layout:I have a single frame on the first scene of my movie. The main content is inside a movieClip called container, placed on frame 1 of my next scene, which inherits from the class that holds the main code to initialize the game.(I read that this way my code will not try to access any movieClips, or sprites before they have been loaded... as they are not actually referenced from a document class).However my 1st frame where I have my preloader takes ages to load... My first question is... Does this happen because the loading procedure is different now? Or has it always worked like this... so that would mean that as I have many heavy assets in my library that are meant to load on frame 1. (Exported for actionscript in properties).I have a blank movie for a while. I'm using a simple code:
stop()
import flash.events.*;
this.loaderInfo.addEventListener(ProgressEvent.PRO GRESS, Loading);
[code].....
View 3 Replies
Dec 10, 2009
I have created a flash game which is about 11 MB in size and i have created the progBar in the first frame of the swf...
But it only shows the loading process after few MBs of data beign loaded...which might take some time and cause the user to close the tab..
I dont want this to happen...How i could tell the user at least that the swf is loading without any percentage and all the animations.
View 10 Replies
Jul 18, 2010
What are, nowadays, the best practices for uploading a large file (which may cause a timeout) with ASP.NET Web Forms and/or MVC? Increase Server.ScriptTimeout (only for the specific POST request); Use some flash client-side uploader like swfupload ([URL]) or plupload ([URL]), but Flash uploads have some issues with proxies; Use some gmail-like javascript (like [URL]
View 2 Replies
Jul 6, 2011
I have a site that deals with large video files (sports videos). The site allows users to upload any source file, but most of the videos come from DVDs. I am currently using a modified version of jumploader to encode and upload files to the webserver with an HTTP request. The jumploader is a java client, and looking at my webstats, only about 75% of my users have java installed.
What I want: I have looked for a flash based uploader that transfers a byte stream to a server. Byte streams would be ideal so I can capture partial videos for failed uploads. I have also looked for flash-based ftp clients, but I haven't found anything promising. There are some flash-based uploaders that post via HTTP, and I'm considering this. I do not want to use a simple file post. Some upload methods also put the full file into memory first, and this obviously is not an option for me.
View 1 Replies
Jan 21, 2009
I'm writing a small mp3 player. It reads the playlist from an xml file, then at the end of a song (or when the "Next" button is pressed) automatically plays the next song in the list.My problem is that if the song is a large file (around 16MB), the player doesn't play the song -- I have to click pause then play a couple of times to play it.
The code is roughly:
Code:
function playSong():Void
{
tune = new Sound();
[code]....
where 'tunes' is an array of paths to the file. I've missed out a couple of things, but that's basically it. Is there an issue with loadSound needing to load some of the song first?
View 0 Replies
Oct 10, 2006
I have to work with arather large XML file (about 25Mo).From that XML file (which I CAN'T touch in any manner), I actually need only a couple attributes in each nodes.Parsing the whole XML to load the data will (of course) lead to a "A script in this move is causing Flash Player to run slowly..."Ideally, I would like to browse the XML, only parsing data needed (like you would do in a database...without having to load the whole database before ;-)But I think this is not possible? Isn't it?So, I was wondering: why shouldn't I treat it like a text file, reading it and taking only the info needed from the file?The problem is that I don't exactly see how to do ;-)Following is a copy paste of the first node only...how would you do to read this text and put in an array:name, cloneof and description?etecting the node name, checking that it exists(i.e 'cloneof" isn't present in each node), and filling the array with the value
Code:
<game name="puckmana" sourcefile="pacman.c" cloneof="puckman" romof="puckman">
<description>PuckMan (Japan set 2)</description>
[code].....
View 1 Replies
