This is what i have to do:
-Place 10 buttons on the screen
-Make 10 objects randomly move as i press each of the buttons.
eg: press button 1, object 1 moves to a random position press button 2, object 2 moves to a random position...
I'm trying to simulate rubber ducks in a bath tub (Don't ask .)I've got 5 mc's on my stage (Each MC is a duck.) And I've been trying to figure out the AS (2.0) to make them all move in random directions around the stage, bouncing off each other and the stage sides.
View 7 Replies, i want to make a carousel -type gallery like the one from the tutorial but with a slight variation: i want it to move only when i press a button.(move left when i press the left arrow and to the right when i press the right).And i want it to move by one image at a time and i want to know which image is to the front(i've created a dynamic text field called imgName).I hope i'm explaining this correctly and i'm attaching an example with two arrows with no actions on them.
View 11 Repliesi am doing this: press buttons on screen to move character left or right, "swipe" elsewhere on screen to do other stuff.
This is how i have handled it:
Multitouch.inputMode = MultitouchInputMode.TOUCH_POINT;
stage.addEventListener(TouchEvent.TOUCH_BEGIN, onTouchBegin);
stage.addEventListener(TouchEvent.TOUCH_END, onTouchEnd);
buttonContainer.addEventListener(TouchEvent.TOUCH_ OVER, tOver);
buttonContainer.addEventListener(TouchEvent.TOUCH_ OUT, tOut);
this works fine, just wondering if anyone has another way to handle it. it seems excessive to have 4 handlers for touch input, but i cant figure out any other way.
TOUCH_OVER and TOUCH_OUT check a switch statement to enable/disable buttons within buttonContainer.
TOUCH_BEGIN and TOUCH_END are used to store points and get a "swipe angle" (only if TOUCH_END is not over a button)
my only problem is i started having glitch's i think becuase so many listeners including: ORIENTATION_CHANGE, KeyboardEvents, Event.DEACTIVATE
this is why i ask if perhaps im missing someway to simplify the touch input listeners
I've just started playing with flash and I have some basic questions that u might have the answer mm,mm? Im attaching 2 files with this thread: ver1 and ver2.In the flash file (ver1) I'm wondering how u could make the leaves move randomlyIn the flash file (ver2) I tried to make them move randomly (see the actions) but my suggestions are not working...the rendering is complaining about something?
View 2 RepliesHi, I am tring to make an object move across the screen randomly..I want it move up-down left or right acording to the values created..for example I want my object move between value (-5 and +5 ) whats wrong with this ? because it always moves downward ???
[Code]...
I've been working endlessly to figure out if there is a method to make an object move randomly. I know there is a way, because I have seen many sites using it. Yet, I am unable to create anything besides specified movement in the x and y values. I can't make anything move randomly.
View 14 RepliesHow would i make it so that i can make something move at an x/y coordinate and have it move there with ease?
View 1 Repliesi need to make an object move randomly around the stage on the click of a button and then stop the object using a different button
View 2 RepliesI'm trying to make an object to move randomly across x-axis and while it moves back and forth it also scales in width.
View 3 RepliesI'm trying to make a series of images move on button press. The first will appear on the stage when the pages loads. There will be a next button which will make the current image move off to the left of the stage and the next move in to the stage from the right and stop in the center. There are about 10 images.
I also have to do the same to another page but with text and moving in vertically instead of horizontally. I have posted this at the bottom (as the images one is too big to post). Although this version is the one I did with tweens that did'nt work, you can have a play with it if you like?
well i want to make buttons that on rollover move to left, on rollout move back to their initial position, and if clicked, they but stay this time at the final rollover place, and be there until something else is clicked. When something else is clicked, the previous button , returns to its initial place. So i ve got it all figured out except for the freeze and move part when the buttons are clicked. All it does now , is when they are clicked they freeze at the position i want, but i havent got a clue how to update them, after so they start moving back, and reacting on rollover and rollout, when the next button is clicked.
[Code]...
make a drawing object move around the browser randomly and incresing it's size from 100% to 200% at anytime. Plus changing it's alpha.. all those with actionscript.
View 1 RepliesI am making a menu that consists of 6 different rollover buttons, these3 buttons sit on a path where the graphics look like a road. What I need to do is have an mc of a car that moves along the road. When the car is at button 1, and you mouseover button 2, the car moves towards button 2, then when you mouseover button 3, the car moves towards button 3 etc., all while the car stays on the road (path) that it sits on - so not like a mouse follow but constrained to the path. I also need the car to go in reverse, so if the car is at button 4, and you mouseover button 3, the car will move towards it.
View 3 RepliesI am making a menu that consists of 6 different rollover buttons, these3 buttons sit on a path where the graphics look like a road.What I need to do is have an mc of a car that moves along the road.
When the car is at button 1, and you mouseover button 2, the car moves towards button 2, then when you mouseover button 3, the car moves towards button 3 etc... all while the car stays on the road (path) that it sits on - so not like a mouse follow but constrained to the path...I also need the car to go in reverse, so if the car is at button 4, and you mouseover button 3, the car will move towards it.
Onmy stage I have a MC, and when I click it a random MC from the Library should appear and move around randomly.
I'm using this to make it move around randomly [URL]
how to make the random MCs appear from the library. And should I put the random moving script on each of my ten MC?
How to make the objects in your flash move without tweening? example, I have 2 retangles and I want the 1st rectangle to move left and bounce at the edge of the scene. And the 2nd rectangle move to the same direction but not the same speed.
Rectangles are: rectangle1 and rectangle2
i want to make 3 objects move in a square pathi tried to use guide layers but it didn't work good for both three objectsonly the first object followed the exact pathis there some other way to do it??
View 6 Replieshow i can make objects move with random speed.i have 3 objects but their speed is handeled by the timeline how i can make them move with random speed
View 4 Replieshow to make the objects in your flash move without tweening? example, I have 2 retangles and I want the 1st rectangle to move left and bounce at the edge of the scene. and the 2nd rectangle move to the same direction but not the same speed.
rectangles are: rectangle1 and rectangle2
I have 5 mc make invisible on stage . On press of a button one of the mcs appear randomly on stage.
View 5 RepliesI visited this kool site-I cannot make the moving buttons move and load a swf. page
View 6 RepliesIm currently try to construct a flash presentation that will have several different buttons on the same stage, and each button when clicked will make particular objects appear on the stage. Then once each button is clicked again it will make the particular objects connected to it disappear from the stage. Each button and the objects it makes appear / disappear is seperate from all the other buttons actions.
construct the actionscript for this presentation as im finding it quite complicated to have several things going off on the same stage at the same time. Im currently working in Flash CS4 actionscript3.
The closest example i have seen to the program i would like to create can be found using the following link...[URL] However my program would be simpler, e.g. clicking the bun in the program just simply adds the bun to the screen, it doesnt scroll through different types of bun.
Can someone tell me how to make 2 different objects/buttons do the same action?I am building a band flash site.I have a music player with basic controls/buttons: stop, play, pause and volume bar.I have a video section and few videos in it. (They are on youtube and I am using this lightbox script for flash to activate them so they play on top of the site / not going on youtube).I want to make that video thumbnail link automatically stop the music (or pause it) and also to open video: I've tried some stuff but I am not too good at coding.[code]
View 0 RepliesI want to make a movie object move up & down when I click on the respective buttons. Now I can do this, thats easy... but what I want is when I hold down on the buttons that it moves on its own? And I don't have to go "*clicky* *clicky* *clicky* *clicky*" (thats the sound your mouse makes) To move the object up and down. Is this even possible? (enter newbie joke here)... Heres the code I got: on (press, release, keyPress "<Up>") { _root.block._y = _root.block._y + 4;} Now the other thing I want to do is have it stop at a certain height. Both at the top and the bottom of the screen. The idea being that someone can't scroll the object off the screen online tutorials? new career move?
View 1 RepliesHow do you press a key (like "L") and go to the next frame?
Which event must I pick?
I assume it's something like: stage.addEventListener(Keyboard., but after that I don't know what to do.
This is for AS 3.0 by the way.
I'm working with a randomly moving MC, and now it looks good except the collisions with the level. When it hits the level it gonna rotate and go another way. I don't want it go through the walls.
PHP Code:
onClipEvent (load) {
xx = -(Math.cos(this.ro._rotation*(Math.PI/180)))*speed;
yy = -(Math.sin(this.ro._rotation*(Math.PI/180)))*speed;
this.ro._rotation = random(360); radie = 9;
[Code] .....
I have movie clips in the timeline and i would like them to move randomly every 10 seconds. by randomly i move, i want each movie clip to move every 10 seconds. So each movie clip will have a movement inside of it by tweening.
so will do something like
mc1.gotoAndPlay(1);
i will create a function to call mc1 and play but i will do this every 10 seconds.
This happends in a *quite heavy* flashproject at work. And what's even more interesting is that it doesn't happend every time. It seem's to be at random. What happends is that text in textfields would move ~1px in X or Y. Have anyone else encountered this?
I thought that it was the layout code that sometimes was updated but no luck with that. And it is not that the text is getting reset either. But it seem's to happend on mouse-input ( press / onRelease ).
This has been tested on different computers and it moved on all, nut in different ways.
i want a my_mc to move when i press the < LEFT> arrow but also to fire and onEnterFrame event so it will move.. and also to delete the onEnterFrame when the key is not pressed so the onENterFrame is not going on in the background
View 4 Replies
