In Flash Pro, I drew a rectangle on the stage.In the first frame, I typed:
ActionScript Code:
addEventListener(MouseEvent.MOUSE_DOWN, method1);
function method1(e:MouseEvent):void
[code]....
These issues only appear on Safari and Firefox on Mac.I tested with Opera and Chrome and Windows (inc. IE), but they work fine.
Mac OS 10.6.8
Firefox 5.0.1
Safari 5.1
Flash CS5.5
1 Hiding the original black arrow cursor (Firefox only)When cursor rollovers to an Invisible button (oneBtn), I want to show custom cursor (newCursor) and hide mouse. But Firefox shows the custom cursor as well as the black arrow...
2. Mouse.show doesn't work only on Safari, Mac.When rollout to the invisible button (oneBtn), the custom cursor (newCursor) hides but the mouse doesn't appear. This happens only on Safari.
stop();
Mouse.show();
newCursor._visible = false;
[code].....
I have a very simple piece of code but it has one very annoying bug. When I press the button a second time, the code doesn't work. The only way to get the code to work is by moving the mouse a tiny bit, or moving the mouse off the button and back on. make a button that can be clicked many times without moving the mouse?
Code:
randommultiquiz.onPress = randommultiquizOnPress;
function randommultiquizOnPress() {
_root.attachMovie("connect", "newconnect", 200);
newconnect._x = 0;
[code]....
I am trying to capture mouse events in flash while the mouse is being held down. The intention is to keep reciving events as long as the mouse is pressed, even if the cursor leaves the flash element. That's the behavior I get on all browsers other than IE, which only fires events while the cursor is inside the stage.
I'm pretty sure I've seen such "well behaved" flash applets work in IE before.
i was doing tutorial from the page [URL]
my problem is that I have in main timeline movie1, who have movie2 in side, and movie2 have movie3 inside it. in movie3 is buttons like in the tutorial. so i try to replace _root with _level2 but doesn't work on mouse button AS.
[Code]....
I have a MovieClip with two buttons inside of it (bottom portion) When I mouse over the MovieClip - it rises up, to revewl the buttons. My problem is, when I mouse over the buttons, the movie clip drops back down. The buttons don't have any actions upplied to them... It acts as though buttons were standing between the cursor and the movie clip... The idea is to hower over the movie clip > reveal the buttons > either move mouse away or click on one of the buttons. However, the movie clip closes when I touch either one of the buttons. Below is the code and thnks a bunch ahead of time:
[Code]....
I decided to try to use setInterval for myanimation, which is just a mouse trail.However, I'm trying to get teh mouse trail to be a dynamic mask.In my previous swf this was achieved by using a holder mc with the animation inside and then using this as the mask. But this time I just canpt seem to hit on the right way to get it to work. The code I am using for the mouse trail is:
Code:
var i:Number = 0;
var myInt:Number;
var t:MovieClip;[code].....
in the function, but now the trail doesn't resize and the mask still doesn't work.
I have a button object that I need to scale to align with the variable width of an array of images.However, when I set the width in code, the button does not actually become that width. Tracing out the width gives me the correct value, but on screen.. it's off.
I've proved it to myself by scaling the same button object manually in the properties pane and visually comparing. Both of the buttons below have a width of 410.
Code:
navigatorDown_btn.width = 410;
navigatorDown_btn.x = (stage.stageWidth/2)-(navigatorDown_btn.width/2);
trace(navigatorDown_btn.width); // output: 410
I am having trouble getting a hitTest to work. My two MCs are lines, one horizontal, one slanted. When the horizontal line gets within the "bounding box" of the slanted line the hitTest is true, but it's not touching the slanted line yet. I saw that the shapeFlag property comes into play here, but only when using coordinates... I'm not sure how to apply it to these two lines. I want the hitTest to be true only when the lines actually touch. I have attached a simple FLA of the problem.
View 1 RepliesI wanna draw lines, without using the mousse at all. Straight lines or Sinusoids, it doesn't really matter. I've found a relevant tutorial here: [URL] but I didn't manage to make it work. Basically didn't fully understand it.
View 3 RepliesI am trying to create a flash movie (AS3) that would allow the user to draw using his mouse but straight lines only. The user would click to set the start point of the line then as he moves the mouse around the line would move with the mouse until the user clicks again to set the end point. When the user clicks again a new line is created without deleting the previous one.
View 3 RepliesI'm trying to write something like this facebook app [URL] I've already written code to let user to move circles with mouse, but i've got a problem with lines connecting them- sometimes i see old ones, which should have been deleted already. I refresh all lines every time any circle is moved. Here is my code which draws lines
[Code]....
Ok, I am new to Flash and I am using CS3. I just learned about creating lines and choosing their end cap styles and joint style. I created 2 lines that were connected, highlighted both with the selection tool and tried to change the join style to miter. It would not work. I also tried round and bevel but they would not work either. I did this over and over with many different sets of lines, and I could not change the join style. What am I doing wrong?
View 2 RepliesWhat is the simplest way to draw a 3d line? E.g. I want a vector from (0,0,0) to (50, 100, 50).Do I have to do it the old school way with maths or is there some new 3d drawing API? (I heard f10 had lots of new 3d stuff...)
View 4 RepliesI just want to make the simplest possible form in flash.I tried to find this online, but the ones I can find are way too complex and elaborate.[code]when the button is pressed I want a php page to open open, that shows what ever was typed in "myText".it must be sent with POST, I cannot have the info visible in the URL.I already know the code to make a button work, (I put the sudo code of what i'm trying to do in it):[code]what is the actual as3 code, I would use to implement my pseudo code
View 4 RepliesI have come against a problem whit this tutorial:i cant erase my lines now i have a bit more then just a pencil and a hole menu whit it,now i have even download the tutorial file and in the file it doesnt work eitheri use flash cs4.ow i dont whant to have anything complex like actionscript 3but still an solution and if it isnt to hard can i make a eraser to?
View 3 RepliesI'm getting "Application descriptor file cannot be parsed" before I've done anything -- see screencast at I've spent several hours trying various dialog boxes within Flash to change air/publish settings, editing XML file by hand, trying to launch things using AIR SDK outside of Flash, googling for something similar, but I can't seem to come up with anything that works.I'm curious if other people follow the steps I followed in the screencast if they get different results. I think they must, as I'm just following the first couple of steps from
View 3 RepliesFrame 1
Code:
band_button.buttonMode = true;
band_button.useHandCursor = true;
[code].....
I have wrtitten some code that draws a couple of lines with changing alpha and width whenever the mouse is moved. I need to convert this code to AS3 so that I can use it in conjunction with some video tracking.
Code:
var speed:Number = 100;
var myNumber:Number;
var myMax:Number = 50;[code]...
I am creating a component that will be a large plus or a large minus. I don't want to use a bitmap because even I can draw this using the Graphics class, but the component must be clickable (the Shape class is not). It will be part of an item renderer, so I want it to be as light-weight as possible. UIComponent does not seem to sent CLICK messages.
View 3 RepliesHow can I cause numbers with no value to show up blank instead of NaN on forms?Let's say I have a User class with an optional weight (kgs) value, of type Number. If I edit a User in Flex I get the user object from the server and bind weightInput.text to user.weight. If weight is null on the server it will be translated to NaN in Flex, and then the value of weight in the edit form showes up as NaN. That is really inconvenient, as I would like it to just be blank if it has no value.
View 1 RepliesI would like to know the simplest way to use a text link and open a visitors email client.
View 1 RepliesI have been working on a map viewer based blitting technique. As part of the map I need to draw approximately 50000 lines and performance is currently really poor.
Code: Select allvar movie:Shape = new Shape();
for( ... )
{
movie.graphics.clear();[code].....
I have a swf that is pretty complicated, you can interact with the page and go to different keyframes and it stops and/or starts depending on buttons, but I want to put it in a fla or something so I can put other swfs next to it and build it up and put several of them together as one.
I don't care about making it too complicated, I just want one interactive swf to go to the next compiled swf when that movie ends, but when I try importing it or loading it it just runs straight through without stopping or paying any attention to the scripting.
My code is on the main timeline.I call a function loop to draw lines between them.The lines are drawing between the right x, y values BUT between those values on the main stage, not those values within the kite.For example, dot1_mc is at x100, y0 inside kite. the line that should go from its center, draws from stage x100, 0.How do I draw the lines inside kite so that they draw between the dots?Heres my code that draws the linesPHP Code:
function loop():void{ lineDrawing.graphics.clear(); var a:Point = new Point(kite_mc.dot1_mc.x, kite_mc.dot1_mc.y); var b:Point = new Point(kite_mc.dot2_mc.x, kite_mc.dot2_mc.y); var c:Point = new
[code].....
I am trying to more between frames using the data returned from a node n_EventID in an xml, when the node returns "1408" I want to move to frame 1 but if it returns anything else I want to move to frame 2. The part where the code moves to frame 2 seems to work perfectly but I can't seem to move to frame 1 when "1408" is returned.
xmlResultFinish = new XML();
xmlResultFinish.ignoreWhite = true
xmlResultFinish.onLoad = loadXmlResultFinish;
[code]....
I'm having a problem, where random IE's are not able to display my .swf file. All the IE's are IE8 with the latest flash pluggins and all security's are set at Medium, however some IE's get just a grey box and other's get the full flash file. What's going on? It works fine in Safari and Firefox of course, but why so much difficulty with AS3 Flash9 in IE? here is a link to the site, and it's the big image changer at the bottom of the front page.
[URL]
But my proublem is that I have a flash presentation.The defalt for moving the slide screens back and forth are left and right arrows.It works fine when tested or even the .swf fileBut then the left and right buttons don't respond when I go to fullscreen.
View 5 RepliesIs it common for AS3 apps to not work in IE? Is there a way to make them work? I have a movie clip in my library linked to a custom class Main and I have nothing on stage. Just one frame. Everything is built inside that movie clip. I add that movie clip to stage through a document class and everything works perfectly in Firefox and Chrome but when I open it in IE, it's just a blank page.
View 6 Repliesi followed the instructions oh how to make a centered pop up window here :i'm using a mac..nd it works in Safari... but when i try to use explore to open it, the pop up window doesn't come up...why is that.......? did i do something wrong?here is my website:and please click on 'message' to see for yourself.
View 5 Replies