ActionScript 3.0 :: Two Sound Clips Playing
Oct 23, 2009
I have a 355 frame timeline with a sound-clip explaining there are two demonstrations, the first will follow automatically but if the user wants to see the second demo first then to click on the link. When the swf file runs, at frame 350 Demo1 (the first demo) starts automatically as expected. If the link is clicked, the main sound clip stops and the second demo starts but the sound clips for both demos play together.How can I ensure that only the relevant sound clip runs?[code]
View 7 Replies
Similar Posts:
Jan 26, 2011
I currently have an dragable button that is locked to only move left and right within a small bar, and want to have that button playing one sound going left, and another sound going right.
View 3 Replies
Aug 17, 2010
Basically I have a flash website built on different frames of the timeline, the simplest way I think.Some of these frames have movie clips embedded into them using the flv playback component class.The problem I have is the following, the site works fine and videos play fine, but whenever I navigate offa part of the website to another, from a frame to another - the sound of the clips that were playing keepsplaying on the background and never stop and it keeps building up every time I navigate of.f each page.I want to remark that I believe is not only the sound that keeps playing "invisible" but the whole clip butThis is the AS code for my buttons on an example frame, would you be so kind to tell me what I should add or change
stop();cvbtn15.addEventListener(MouseEvent.CLICK,onClick25);function onClick25(event:MouseEvent){ gotoAndStop(27);}showbtn15.addEventListener(MouseEvent.CLICK,onClick26);function
[code].....
View 3 Replies
Nov 13, 2010
I have a sound clip that I'm loading externally into my flash file. The code I'm using looks like this and is placed in the as layer on the first frame,
var mySound:Sound = new Sound();
var myChannel:SoundChannel = new SoundChannel();
var myTransform = new SoundTransform();
var lastPosition:Number = 0;
mySound.load(new URLRequest("introaudio.mp3"));
myChannel = mySound.play();
[Code]....
View 14 Replies
Apr 10, 2011
I am creating a game that has 6 movieclips all on the main time line of the game. Each movie clip has three buttons that when clicked plays, pauses or stops a sound clip.When I press any of the sound clip play buttons that sound starts playing, the problem is when I click any of the other sound clip play buttons those sounds also start to play. Is there a way I can disable the other sound clip buttons while the current sound is playing then enable all of the buttons when the current sound has stopped.
This is the code that creates one of the sound objects
[Code]...
View 3 Replies
Oct 3, 2009
So I made a few buttons with sounds within them and when I publish it they work just fine. But what I want them to do is;
Say I click a Button.The sound starts playing.Then I click it again, before the sounds done playing.I want it to stop the playing sound and start playing the button I just clicked on, whether it be the same button, or a different one.Right now it just ends up sounds like an echo because it'll play it as many times as you click it.
View 2 Replies
Aug 1, 2011
I'm trying to play a sound using a technique found here (play the sound by sampling raw sound data gathered from the original with extract()), with the difference that the mp3 sound is embedded in the swf, not loaded externally. This is my code:
var soundBytes:ByteArray = new ByteArray();
var mp3sound:Sound = Sound(new Sound1_design()); // this is the embedded sound
mp3sound.extract(soundBytes, int.MAX_VALUE);
[Code]....
This works, in a way, except that the resulting sound is distorted (it has a kind of a metallic ring).
View 1 Replies
Jun 22, 2003
I am loading small sounds dynamically with the loadSound command. These small sounds are activated with a rollover. see script below. This works ok. however. i want the first sound to keep playing while the rollovers load sound. a bit like playing the piano. This works ok when i import all the sounds into the library and place them on their very own button. however the size of the flash movie increases to 140k. whereas when i load them dynamically the size of the movie is 20k. obviously i want to load dynamically.
But with dynamic loading each sound stops when another sound is rolled over, so that there is only ever one sound playing at once. I need to load the sound into a different level or something, so that the first sound can keep going while the smaller, shorter sounds play over the top. this is my script below. The first sound loads when the movie starts. This is the one i want to keep playing. Then there are the smaller ones with rollovers. does this make any sense? there's actually 13 little sounds.
[Code]...
View 3 Replies
Dec 6, 2011
ok so i have a button that plays an animation for fire when held down. and when realsed goes to and stops and frame one. when it reaches the end of the time line it goes to and plays at frame 10 and goes back to the end of the timeline. I have a sound for the fire animation that plays for the effect. The problem is the sound keeps going untill its over even if the button isnt held down. and when the playhead reaches the end of the timeline it goes to and plays and frame 10 and it replays the sound. if i hold it down it will just keep playing the sound over and over from start to finish. what i want it to do it when i hold the button down i want it to play the sound and when released it stops the sound where ever it is at. I also dont the sound to play again if there is a sound already going to stop it from playing 20 sounds at one time it gets loud and you need asprin after about 5 seconds of that.
View 2 Replies
May 4, 2011
The thing I don't understand is how to assign a sound to a soundchannel without playing the sound. All the examples I've seen do this.
Code:
_SoundChannel = _sound.play();
_SoundChannel.stop();
And how can I set a SoundChannel volume to zero before allocating a sound to it?
View 2 Replies
Apr 16, 2010
I am trying to embed some sound controls, and have hit a dead end. I made my play and stop buttons, imported my mp3,, assigned it proper linkage, and inserted this AS2 :
[Code]...
The buttons are named "play_btn" and "stop_btn" respectively. When I export it or preview it, hitting the play button does not do anything.... I hear no sound. What could be up with this?
View 4 Replies
Aug 9, 2010
I've got 4 mc clips on the main timeline, each with an embedded button. When I click on one button I want that mc clip to disappear and the other 3 to keep playing. When I click on the next one, the same must happen. The problem is I need a function to see which button was selected to that it knows which of the movies to keep playing and it must check what buttons have previously been selected so that it knows not to show those mc clips as well. if release button 1 play mc 2 ,3 and 4.......if release button 3 and button 1 has been released, play mc 2 and 4
View 9 Replies
Jul 5, 2011
I've got a project I'm working on in Flash / AS3 and I was hoping to find a way to have the program run a search through a publicly accessible API using an artist name and pull an MP3 sound clip that the user could play. I looked through Amazon's API but it didn't seem like it could accomplish this. It also seemed pretty daunting to integrate into flash.
View 1 Replies
Mar 17, 2011
I have a problem with some AS3 code and i don't understand why.. my code looks like this:stop();
[Code]....
But there shouldn't be a problem with this, cause the movieclips are the same as the others and has an instance name of gt5 and gt6 just like the other movie clips, and the code is obviously the same?
View 11 Replies
Feb 26, 2012
I have a movie clip on my timeline and it has maybe 60 frames in it. There's enough space for it to play and loop, and when I press ctrl enter to preview it, it plays as expected. However, as I scrub through my animation, the only things that play are the motion tweens I made. The movie clip just stays stuck on the first frame. I was curious so I exported it as is right now and it goes through the frames correctly there too. However, this is fustrating because I want to see the movie clip cycle through it's frames when I scrub through my timeline!
View 2 Replies
Jan 12, 2010
Basically when I click the Photo and Graphic sections, none of my MOUSE_DOWN states are working on the MovieClips within... the only one that works is Motion. And for the life of me, I can't seem to spot what's wrong. I've looked over the code a thousand times and seem to hit the same loss of words all over again.
*EDIT* Oh and apparently everything loads fine after you initially click "MOTION" but if you don't click Motion and go Straight to one of the other two sections, it's like a certain movie clip hasn't been initiated or something. Meaning... The buttons within the sections will all work if you Click the Motion Section First. (But only once you've clicked on the Motion Section.)
View 1 Replies
Apr 9, 2010
I have a button which when pressed I need it to play a frame on the main timeline which contains a movie clip. I also want the same button to play another frame with another movie clip after the previous frame has finished playing. I have attached a sample file of what I am looking to d
View 18 Replies
Oct 16, 2010
I've created six movie clips of cursive text effect using masking for the animation. Each clip is approximately 160 frames long. I need to play these sequentially, one after the other, when the page loads. structure multiple clips to play after each other?
View 3 Replies
Nov 25, 2011
I wanna control 4 or 5 video clips by AS3, here video clips are separates on files/frame, how can play this one by one.............!
View 1 Replies
Dec 4, 2003
i just started learning to work with actionscript so im not that good.i have 5 movieclips on the bottom on the site im trying to make.i want them to blink in order first clip to th eother.so when the first one is done blinking i want the other one to do so, and so on untill they are all done this is the code i got for strobe like effect, but im not sure how to use it with multiple clips so they dont all do that effect at the same time.[code]
View 4 Replies
Sep 18, 2003
how to get movie clips to play randomly? Here's what I want to do:
I have four movie clips already created and I want to make it so that when someone visits the page and accesses it for the first time, one of the four is randomly selected and plays (I also want to be able to tell it what frame of the movie clip to go to)!
View 1 Replies
Oct 23, 2010
I just recently tried getting the hand of understanding AS3 from AS3. I am finding it a bit of a struggle to try and understand using random.math.I am trying to use random.math to make each movieclip play randomly and then stop. I tried looking for online tutorials but I only seem to get information of creating a random math number which I don't want.I am not sure I am meant to use a timer or to use random.math function. The idea is to have say 4 movieclips start an animation randomly so when the user looks at the screen, a different movieclip will play.For my button I have put this code for them (photo_mc is my button):
Code:
import fl.transitions.*;
import fl.transitions.easing.*;
[code].....
View 8 Replies
Jan 29, 2011
I have 3 movie clips mainclip(_root),one_mc(inside _root),two_mc(inside one_mc). and i want to play the animation in reverse direction so that it has to play two_mc in reverse direction first then one_mc ,and _root all in reverse.
View 2 Replies
Dec 4, 2003
i just started learning to work with actionscript so im not that goodi have 5 movieclips on the bottom on the site im trying to makei want them to blink in order first clip to th eother.so when the first one is done blinking i want the other one to do so, and so on untill they are all donethis is the code i got for strobe like effect, but im not sure how to use it with multiple clips so they dont all do that effect at the same timethe code iis
Code:
cir.step = 0;
cir.seconds = 1;
[code]......
View 4 Replies
Oct 9, 2004
On my main timeline, I have a "Background" graphic object with some control buttons, on the main timeline there may (or may not) be a few other movie clips playing at any given point.
I want the pause button (in the Background object) to figure out what all movie clips are playing from the _root down, and stop them all. I am currently doing this by putting in the code: mc1.stop(); mc2.stop(); mc3.stop(); etc...
View 7 Replies
Sep 2, 2010
Im making an animation and in the 3rd scene i have a deer that screams and the sound plays way to early. I had to drag it out way past the frame where it opens its mouth for it to play at the right time.
I have no idea whats wrong this has happened before. I really dont want to have to guess on where to put the sound for everything a character says.
View 2 Replies
Sep 21, 2009
Back to my nightmare project, I've embedded sounds in the project that play based on certain user actions. They play fine for me (PC), but my customer is telling me they don't work for her (Mac).Would there be ANY reason a sound would play on a PC but not a Mac?I've told her to update her Flash player to make sure it's current and to make sure her speakers are on and the volume is up, but no sound.Okay, the REAL reason this isn't working is user error based on everything else I'm told that's happening and not happening, but I need to cover my bases and see if there really may be a reason sounds won't play on a Mac.
View 3 Replies
Feb 18, 2009
boards and even newer to ActionScripting and FlashWhat I would like to do is play random movie clips on my main timeline. I've tried using the below code, but it does not work:
Code:
var movieList:Array = new Array(mc1, mc2);
var i:int = Math.round(Math.random() * movieList.length);
[code]....
View 1 Replies
Apr 23, 2010
Excuse the probably simple question but I'm just starting off with Flash.I have imported a few video trailers directly into flash and saved them as movie clips. I want to be able to insert these movie clips onto the main timeline and play them one after the other, repeating once they have all played. On the main timeline I have set a layer for each clip and a keyframe where the clip is inserted for each layer. When I go to play the flash file, it is showing the first frame from each movie file and then moving to the first frame of the next movie file. What do I need to do to make flash play the entire movie file in that specific frame before moving to the next frame where the next movie file is and playing all that movie?
View 7 Replies
Aug 23, 2011
I'm trying to play different animations using buttons using the below code but I keep getting an error. Totally new to flash but I'm sure it's something really simple
function goHome(event:MouseEvent):void { home_animation.play(); } home_btn.addEventListener(MouseEvent.CLICK, goHome);
function goIntro(event:MouseEvent):void { intro_animation.play(); }
[code]......
View 1 Replies
