My animation works in AS3 but wont respond to mouse events I suspect I have bitmaps and have to convert the bitmap to a sprite.I cant do this as yet.
}
private function imageLoaded(event:Event):void
{
var Singleimage:Bitmap = new Bitmap(event.target.content.bitmapData);
[Code]......
My animation works in AS3 but wont respond to mouse events I suspect I have bitmaps and have to convert the bitmap to a sprite.I cant do this as yet.
Code:
} private function imageLoaded(event:Event):void { var Singleimage:Bitmap = new Bitmap(event.target.content.bitmapData); //var bmd=Singleimage.bitmapData; //img1=new
[code].....
I'm making a Flash game (which is basically a version of the same game), and I've used a tileList for the board populated with movieClip pieces. I would like the pieces to respond to mouseOver, mouseOut, and mouseClick events. From looking at other question/answers, I get the idea I'll need a custom imageCell. Is that the way to go. I was hoping I could get the responses I want by putting the actions into the movieClips themselves as below, but that doesn't seem to work. (btw I'm new to the community but have wound up here several times from Google searches
[Code]...
if I attach two movie clips MC1 and MC2 on the stage.MC1 has a simple button also. MC2 is transparent.First I attach the MC1 and then I attach MC2. Both on the stage. So obviously, MC2 is added over the MC1. In this situation, I cannot click the button which is place in the MC1.If Im not wrong, in AS2, if the MC2 is transparent, the button in the MC1 can still respond to the mouse events.
View 1 RepliesI have a banner with big invisible button covering the stage and underneath it I have movieclips which must respond to mouse events. But I can't get through invisible button. I only get button events and cant interact with movieclips underneath it. Here's simple code:
invisibleBtn.addEventListener(MouseEvent.CLICK, onTopClick);
bottomMc.addEventListener(MouseEvent.MOUSE_OVER, onBottomOver);
function onTopClick(e:MouseEvent):void{
[Code]....
I'm trying to place 5 instances of a horizontal line (mcLine) starting at 78% from the top of the Stage. This all works fine, but I want to be able to have these dynamically created MovieClip instances register mouse events and they don't.First the setup of the mcLine instances:
var nFirstLineY:Number = (Math.round(Stage.height*.78));
var nLineSpace:Number = 22;
var nWaitTime:Number = 1000;[code]...
If I place instances of the mcLine MovieClip on the stage and name them line_1, line_2, etc., the function LineVibrate works, but when I try to add the instances at run time as above, the LineVibrate function stops working.
I have a movie clip I am using as a button (instance name btn1) and I added an event listener to it (using the following line): btn1.addEventListener(MouseEvent.MOUSE_OVER, animate1); the function "animate1" triggers some small animation when the mouse is over the movieclip. my problem is that the animation is triggered both on mouse over and mouse out events.
View 5 RepliesI created a class with a timer, the timer works but I am having 2 problems, I want it to respond to events on I want to start the timer on MOUSE_LEAVE, and stop it on MOUSE_MOVE so that basically whenever the user removes the mouse from the banner it starts the timer cycle again and when the movie detects the user is interacting with the banner it stops the timer
[Code]...
I am creating an Action Script .as file and I want to be able to respond to events from a URLLoader.
[Code]...
When I try to run the FLA which calls it it get an error against line 18 1046: Type was not found or was not a compile-time constant:Event.
What extra line(s) of code do I need?
I want my flash movie to respond to rollover type events for links on my website. The idea being that the flash movie will provide descriptions of the links when moused over, but if the user doesn't have flash the functionality isn't lost. What's the best way to do this (if it's possible)?
View 1 RepliesThis code doesn't do anything when I rolled over...
this.createEmptyMovieClip("logo_mc", this.getNextHighestDepth());
_root.logo_mc.onRollOver = function(){
trace("rollover!!!");
}
logo_mc.loadMovie("http://www.macromedia.com/images/shared/product_boxes/80x92/studio_flashpro.jpg");
I have a sliding scroll bar which responses to the mouses movement (as seen on link). [URL]. How do start to embed buttons within the movie clip so it stops and goes to another animation/movie clip?
View 2 RepliesRight now all the sounds (78 of them) on my guitar play using the roll_over event but that doesn't give the user much control over what sound is played.
The actionscript im using to play my sounds is this;
for(var i:uint = 0; i < buttonArray.length; i++){
buttonArray[i].addEventListener(MouseEvent.ROLL_OVER, buttonRolledOver);
}
[Code]....
What i want to do is only play a sound with the roll_over event when the left click is held down.
I would like to create some text on the stage that does not respond to mouse activity. I've found that after adding a piece of text to a class I am using to draw, it covers up some of the mousing area of my class and disables the user from being able to roll over the other graphical elements...
Is there something like:
var t:TextField = new TextField();
t.text = "hello";
t.active = false; //
i know that this is wrong, but I haven't found an equivalent method
Just wanted to ask if there is any advantage for either using mouse click event or touch tap events, when writing apps for mobiles or tablets (for the iphone especially)?
I know that both of them should work fine, but in term of performance, is anyone better? Are there any things I should be aware of when choosing either?
By the way am using actionscript3 to implement the app.
I have an animation that I want to start when clicking on the flash window. However, I've also have some buttons on the stage. If I add an event listener for MouseEvent.CLICK on the stage, then it 'eats up' the events and the buttons don't work.
I've tried some tricks, by adding some invisible buttons on top of the real ones, and use the MOUSE_OVER event to selectively enable/disable the mouseEnabled flag for the stage, but didn't work because it complains that the property or method doesn't exist (which I find odd).
In a project i'm doing I have a custom cursor, using the start drag command and mouse.hide. the issue being that the movieclip being dragged is blocking the mouse from initiation mouse events properly.
View 3 RepliesIt has been awhile since I have worked in flash.Right now I am working on something where I would like a panel to disappear when someone mouses off the stage.stage.addEventListener(Event.MOUSE_LEAVE, leaveHandler); It usually works fine but if I move my mouse really fast it doesn't fire. I have also tried the same thing using a custom invisible button that surounds the perimeter of the stage and I have tried ROLL_OVER and MOUSE_OVERand again, if I do it too fast my event doesn't fire (I am using trace)I can't find anything on the net about this - is this typical of flash that if you move your mouse too fast you break it? Do I need to increase my frame rate (I would really rather not because I have perfectly timed animations - I am at 30 frames per second)
View 1 RepliesI have a menu drawer at the edge of the screen that shows when the user rolls the mouse over it, but if the user overshoots it an moves the cursor slightly outside the browser window this is unfortunenatly registered as a mouse out.
I want to stop this by using event.MOUSE_LEAVE, but i need to use it as a condition not to triger a "leaveHandler".
why i am getting spurious mouse_out events when moving the mouse down or right but not up or left over a Sprite?
View 3 RepliesI am looking to provide some UI functionality using the mouse- I have two distinct UI events to be achieved via mouse
a) change value
b) delete object
I don't seem to have sufficient mouseclick events for both. I am avoiding using the right click as it has some default options(whose signing off will affect the whole project- not just this). I have mouse click used for change value- how do I use the doubleclick as the single-click events seems to get invoked prior?
Do addCallBack function only works in HTML onClick events or i m missing something. I mean the function i wrote on javascript. When i put the function in some other place it never works. But when i add a button via html and give this buttons onclick the call back function it works
View 0 RepliesI'm working on a "floating" flash animation that's scheduled via a CMS it works perfectly in FF and doesn't show up at all in IE.Before I start tearing into CMS issues, I want to make sure there's not an obvious reason for this problem.It's a purely "code" animation.There's nothing on the stage at all. AS3 document class adds a couple of move clips from library, then programatically creates flames around them with Perlin noise and displacement map filters.
View 5 RepliesI made a scale animation that works on IE 7 but it does notwork on Firefox 3.The button toggles between scaling up and down. In Firefox, it starts the loop for scaling up but it isquickly interrupted and return to its original scale.What should I change in the below code to make it alsofunctional on Firefox 3 ?
<head>
<script language="javascript">
var obj = null;
[code]......
I made a scale animation that works on IE 7 but it does not work on Firefox 3. The button toggles between scaling up and down. In Firefox, it starts the loop for scaling up but it is quickly interrupted and return to its original scale. What should I change in the below code to make it also functional on Firefox 3?
[Code]...
I have an animation inside a movieclip thats located on the main timeline. There is a stop on the first frame of the movieclip, and whenever I try to do the _root.MC.gotoAndPlay(2) it will play like one frame then stop.
View 2 RepliesI have a movie clip working where on rollover it sends it to scene 2 to play an animation but I don't know how to bring it back to scene one once you roll off of the clip. I have so far:
R1.addEventListener(MouseEvent.MOUSE_OVER, do1);
function do1(event:MouseEvent):void
{
gotoAndPlay(2)
stop();
}
what needs to be added to send it back to scene 1 after you MOUSE_OUT?
I have two MovieClips, and both are controlled by keyboard events. One is a globe that I want to rotate in one direction or the other. The second is a walking animation that should change direction or stand still depending on which key is pressed or if none are.
Here is the AS Code:
/*var rightDown:Boolean = false;
var leftDown:Boolean = false;
var upDown:Boolean = false;
var downDown:Boolean = false;*/
stage.addEventListener(KeyboardEvent.KEY_DOWN, keyDownHandler);
[Code] .....
You can see that I've tried a few different methods, but neither has worked correctly. Using the timer came close, but then the globe kept speeding up, and I couldn't get the walking animation to default back to the standing animation. Here is the .fla [URL].
I recently made a simple Flash file with video with an alpha channel and three simple buttons. It's a site tour video, and there's a button in the lower right to exit the tour that takes you back to home page. When you move over the "Exit Tour" button, it transforms in size slightly to highlight it. However, PC users are telling me that they can't see the word "Tour" on the button, only "Exit" until you move over the button, then they can see both words. The button functions perfectly on a Mac. Also I've been told that the video often appears choppy and sluggish on PCs, and not Macs. I'm encoding and streaming on flash media server - 400kps, CBR with alpha channel encoded, size 880x512. This is put on a stage size of 980x667 in Flash - is this is just too big of a window for streaming to handle? I have attached some files for reference.
View 1 RepliesI used to play around with flash during the early days of action script 1.but now i can't seem to find my way around it. Used to be able to add the script to the button itself.[code]what I want to do is to have a toggle button show and hidethe objects on the movie.
View 1 Replies