I just need to call a variable or function from a movie clip to main timeline. In AS2 I would use something like:
_root.myvar = "Hola";
or
_parent.myfunc(4,2);
But this doesn't works on AC3. I tried to remove the "_" but its the same.
I want to use a variable in my movie clip code. Right now I generate a random U.S. state name and assign it to "correctAnswer". Then I want to assign that to myMovieClip.correctAnswer.gotoAndStop("down"); The problem is that the variable is not recognized and is seen as correctAnswer instead of the U.S. state that was assigned to it. My code is below.
ActionScript Code:
// Correct answer is randomly generated and can be any U.S. state name
correctAnswer = "utah";
// Using the variable correctAnswer this should come out as myMovieClip.utah.gotoAndStop("down");
myMovieClip.correctAnswer.gotoAndStop("down");
I'm trying to use a movie clip's function from a fellow movie clip 2 children up and I can't find the right code. I've used:
MovieClip(datalist.getChildByName("content")).onpauseButton();
MovieClip(datalist.root.root.root).onpauseButton();
MovieClip(datalist.scrollb.content).onpauseButton();
MovieClip.(datalist.onpauseButton);
and none of them work. The function is "onpauseButton" and it is inside of "content" which is inside of "scrollb" which is inside of "datalist." I'm trying to call it from datalist's neighboring movie clip so that it activates along with another function:
manualButton.addEventListener(MouseEvent.CLICK, fl_ClickToLoadFile_1);
function fl_ClickToLoadFile_1(event:MouseEvent):void{ navigateToURL(new URLRequest("M-23 6263.pdf"), "_blank");// want to add the onpauseButton code here
}
I recall that there is a way to do it, I just can't find the right sequence. Everything online is about how to call up to a function outside of the movie clip and not down to a function inside of one.
Does anyone one know if it is possible to call a function from a different movie clip than the one it is in. For example, a function named loadData() which is on the first frame of a movie clip instance named thumbNail which is on level 0 on the stage i was thinking that it should work to call the function from frame one on the stage with..
View 5 RepliesSuppose I have three different movie clips. mc_A, mc_B, mc_C I want to have a rollover call a function that changes each movie clip. But I don't want to type it out like this:
Code:
mc_A.onRollOver = function() {
Explode.newExplosion(mc_A);
};
mc_B.onRollOver = function() {
[Code]...
Above you will see that I used this, it made sense to me, but this always refers to the main timeline (root in my case). So how do I pass the name of hte clip I am rolling over to a function?
I'm having an issue with a simple movieclip onRollOver event. Here's my code:
Code:
_root.mc_shutternav.mc_nav_8.onRollOver = over;
_root.mc_shutternav.mc_nav_8.onRollOut = out;
_root.mc_shutternav.mc_nav_8.onRelease = hit;
[code]....
However, with this setup the function hit() is called automatically every time I publish the movie. What's wrong with this? What's the difference between mc.onRelease = function; and mc.onRelease = function()?
I have a child movie clip attached to the parent via the flash interface. The child is running a timer via code on its (the child's) timeline. When the timer finishes it needs to trigger a function on the parent's timeline. All the examples show how to trigger a function on the child - that is easy and I have got that working.
View 1 RepliesI have a function at frame 1 (_root). Well, i am trying to call this function from a button, inside a movie clip, but it's not successful..
View 2 Repliesi have a movie clip with an actions layer can i call a function from an actionscript file from the actions panel?
View 6 Repliesmake a circle object movie clip call ball and make a rectangle object movie clip call mc and paste this coding.
[Code]...
can anyone explain about the movement about D? the D is talk about the distance if i go -X,way my ball go ++ to +x?
I want to monitor a variable. Whenever the variable value changes I want to call a function. In actionscript 2 I can use "watch" but in as3 what can do ?
View 1 RepliesScene1->MovieClip1->Image1(as a button)Scene1->MovieClip2->MovieClip3->MovieClip4->frame1Now I want to call frame1 from Img1 have a parent Scene1 common.How can I do this.I have tried
on(release){
_parent.MovieClip2.MovieClip3.MovieClip4.gotoAndPl ay("frame1");
}
[code].....
i have a loop that attaches clips of the picFrame to a holder clip based on the number of childNodes. how do i target the selected picFrame clip and have it call the function resizeFrame to change the width of just the border clip inside the picFrame the onRelease was chosen? i realize under the resize function i have it targeting the holder clip's width. i just don't know what else to do and i've tried many else's.
[Code]....
is it possible to write a function to move an object and then call that function on a clip event for instance
function (bounce){
script;
script;
}
and then call it by saying
on(mouseOver){
this.bounce;
}
i was wondering if anyone knew how to call a movie clip inside a movie clip
View 6 RepliesI have taken variable in one function and want to use that value in another function.
View 2 Repliesi want to call a function from within a function using a variable representing its name...
[Code]...
i've been tryin to figure this out for quite some time now since FLASH MX , i just kept abandoning a solution.. and now i'm once again in need of this , still cant solve it so im postin...
I'm just getting the hang of AS2 OOP, after avoiding it for all this time, and I have set up my first couple of classes.
One class generates an array, and the other class takes this array, and uses it it to place MC's on the screen, and gives each mc an onEnterFrame function. I have a stack of these onEnterFrame functions, named 'avoidIt1()-avoidIt11()'[code]...
I'm trying to pass a variable through a function, but I'm getting it's value 0. Here's my code:
thumbLoader.addEventListener(MouseEvent.CLICK, goToCategory);
function goToCategory(e:MouseEvent) {
trace(c);[code]....
this trace gives me value of 0. Normally I would do goToCategory(c) and inside that category I would get it's value, but in this case I'm calling this function with an event, how can that be done?
var c is declared globally, so I'm using it above this code in different place... is there smth like global $c like in PHP.. or there's some other way to do it?!
I need a way to call a function from a function. It's not that hard, I know, but the name of the nested function is a variable passed into the first function. Like in setTimer() and other functions in flash, where you have the name of a variable to call. I'm going to have a lot, so doing some cheap if(funcname == blabla){blabla();} won't work.
View 1 Repliesi'm trying to call a function on a clip, but i want to use a variable that i'm sending to the clip so that when the one function gets done it knows what to do next.
MovieClip.prototype.moveHere=function(x,y,spd,func ){
this._x+=(x-this._x)/spd;
this._y+=(y-this._y)/spd;
if(Math.abs(this._x-x)<1 && Math.abs(this._y-y)<1){
[code]....
I really have two questions: How do I affect both a movie clip and its child movie clip in the same function? and how do I pull info from one component into a function for another? My basic setup is a movie clip of font choices, one on each frame: "bodyText_mc." Each of these frames has a child clip "bodyText_mc.bodyText" with alignment choices for the font. For instance, the user picks "Script" in the first ComboBox and then picks "Align Right" in the second. (All of this text is static because I need more design control that I can get with dynamic text.)
First of all, I have a combobox "cbBodyFont" that I use to go from frame to frame on movieclip "bodyText_mc." This works nicely:
[Code]...
The question is, How do you apply a function to a movie clip inside a movie clip inside a movie clip. So there are three mc and I need to apply the function to the inner most one.
Here is what I have. The 'a' is in 'spin_4' wich needs to be in 'portal'.
ActionScript Code:
for(var i = 1; i<=12; i++){
this.spin_4['a_'+i].onEnterFrame = function(){
if(this.hitTest(_level0.man)){
[Code]....
Let's Say I Have This Class:
package{
import flash.display.Sprite;
public class Main extends Sprite{
public function Main(){
trace(getAverage(1,2,3));
trace(getAverage(1,2,3,4));
[Code]...
I need to call an object or function name with string variable.[code]it's working but, if I do something like below its not working [code]
View 2 RepliesI'm a bit confused in AS3, after long developing in 1 & 2. I'm doing a radioplayer, so I did set my document to be of document class: RadioPlayer. Here is everything ok, sound playing etc. Now my client wants to add a volume button. So I made a movieclip of class VolumeManager. Now, to change the volume, I want my clip to call a public function of RadioPlayer.
As RadioPlayer is the document class I don't know how to reference it inside VolumeManager to call its public function. In AS2, I would say: _root.setSoundVolume(volume);
I COMPLETELY MESSED UP MY CODE AND DID NOT CHANGE THE MOVIECLIP NAMES WHEN COPING IT INTO STACKOVERFLOW. SO IT MADE NO SENSE.
I am wondering if there is a better way to accomplish the following as3:
//THREE EVENT LISTENERS
shoe_icon.addEventListener(MouseEvent.MOUSE_DOWN, shoeApp);
top_icon.addEventListener(MouseEvent.MOUSE_DOWN, topApp);
[Code].....
In my project are pages of text with each word having a button that when pressed will display a movieclip presentation about that word (its pronounciation and spelling etc..). In the project I am working on now I have over 450 unique presentations of words to deal with. I don't want to have all of these hundreds of movie clips on the stage and tell them one at a time to stop and rewind and then have one play each time a word button is pressed. That seems to be very inefficient to me.
add movieclips to the stage using addChild(movieclipname) and remove them using removeChild(movieclipname) but there is a problem. I have hundreds of unique movieclips and I don't want to have to manage hundreds of variables containing the indivudual movieclip instancess. It is a real pain having to figure out what instance is still on the stage before i delete it.In Adobe Director all I have to do is this:
I want to loop through a movie clip and assign a function to each of the clip's child movieclips. when i do a for...in loop and then do a typeof() trace I get "string" and obviously it won't let me assign lets say 'onRollOver' functions to the children.
View 6 RepliesHere's a simple one I'm sure but I can't get it to work or find a solution online.
I have a movie with 2 movie clips on the stage, the first clip is triggered to play on a button click (which works fine) but I want the 2nd clip to start playing when the first ends. I've tried putting MovieClip2.gotoAndPlay(1) script on the last frame of MovieClip1 but I get "1120: Access of undefined property".
