In flash, using AS3, is it possible to make buttons over an image, by describing coordinates on it? Like imagemapping in css... For example, I created an hexagon, on each edge of it, I want to make buttons, using coordinates...
View 4 Replies-I have a movie clip mc1 that is a member of an array lets say arr1
-I have another Movieclip mc2 which is member of another array arr2
-I have a start drag stop drag function. When I start dragging mc1, I also want to trace the event target index of arr1. Well it shows me the index of mc1 in arr1 quite ok.
-Now I stop dragging mc1 on mc2. mc2 is now the drop target. ok. And I want to trace the drop targets index in arr2. it should be something not minus right?
because mc2 is a member of arr2. But it gives me -1 .WHY.
-And second, If I trace what the drop target is , it sholud say mc2 . but it says OBJECT-SHAPE. ANOTHER BÄ°G WHY
I have 3 square. smallest square s3 is inside s2. s2 is in side s1. each is 10px larger [code]how can I find the coordinate of child in its parent's coordinate system?
View 1 RepliesWhat would you use to create buttons which when pressed load an image in an image area within the same flash document?
View 1 RepliesI'm trying to create a movie clip with images that will slide from one image to another using next and previous buttons. I want a sliding effect. For example on this site: [URL] The right side large image you can slide the image by using the arrows. That's exactly what I want...but in flash.
View 3 RepliesI have an image that is loaded into a scrollpane, which works fine. I have two buttons on the stage that I want the user to be able to click on in order to zoom in or out of the image that is loaded into the scrollpane. I can't seem to get these zoom buttons to work on the movieClip with the image that is loaded into the scrollpane.
Lastly, I don't know if this makes a difference, but this swf file is loaded upon release of another button on the root timeline of another swf.
I tried attaching a simplified version of this file to this message but even zipped I cant get it lower than 380kb. I can email it to anyone if they are interested.
Attached is a link to a file I made named "index".I would have liked to have included the following files but was limited due to "you-send-it" not uploading folders.Files not included: [but functioning and vital to the site as well as the question]- xml list- images [folder]- thumbnails [folder]
View 7 RepliesI'm very new to flash and am using CS4/AS3. I have three image galleries of three images each. The images load dynamically from files on my computer. I've set it up so that when you click on a tab, you see a different set of three images.
The images load properly and it works to click forward to view them (that is, clicking on the image itself or the forward nav arrow). The issue I'm having is with the backward nav arrow. I keep geting an error message "Error #2044: Unhandled IOErrorEvent:. text=Error #2035: URL Not Found" when I click it.
The backward nav arrow works on the first gallery (egypt gallery) if I click that one first. But it doesn't work on the other two, and if I click back to the Egypt gallery after having been in the other two galleries, the back navigation no longer works in their either. Basically, I want the user to be able to click on a tab to load the images, and then be able to click back and forth between the images.If they reach the last image in a gallery, I just want it to stop advancing and stay put on the final image, but for the user to be able to click backwards through them if desired. My code is pasted below (I'm sure it's more complicated than it needs to be...
[Code]...
how can I make a series of buttons using an image. I have diferents image for each area in GIF format. I create a button with each image. But, when I put each button in the frame, the area where a button is over another button capture the event of the mouse over.What do I have to do for determinate the edge for each button with the image?
View 1 Repliesmy buttons are working and displaying image but cant figure out how to get buttons to display different img
View 2 Repliesi have a mapMC on the stage and 6 buttons. i need to be able to make the buttons move the mapMC to specified coordinates. the coordinates are set and will never change. i also need an easing from one location to the next. i guess i'll go ahead and throw in a bonus question for any of you aces out there. lets say location "A" is at x=200, y=400. i would like the mapMC to get there and scale 120%. so a button that gets pressed will go to its coordinates and scale acordingly. i can see that this could be script heavy, but for some reason not too difficult.
View 1 RepliesI have a movieclip with a drag function, and after each drag I want it to trace the x position. I tried the following code but it always outputs 0.
ActionScript Code:
sliderMC.addEventListener(MouseEvent.MOUSE_DOWN, fl_ClickToPosition);
function fl_ClickToPosition(event:MouseEvent):void
[Code].....
to get the position of a movieClip in the x axis, we use: trace(movieClip.x);is there an alternative for ".x"???
View 3 Repliesfirst have a look at this: [URL] It loads "auto" coordinates from php file, and makes the "auto" move after timeinterval. It is needed tht it could load infinate coordinates, but i fail to do it. If u change setProperty(auto, _x, kord ) to setProperty(auto, _x, x2 ) , it works, but as u can see only with one coordinate.
View 9 RepliesI'm having problems with my AS2 and XML (on Flash 8). I finally figured how to create a simple slideshow which incorporates a "Next" and "Previous" button...but what i'm struggling with is: "How to click on the 'next' button so that the existing image scrolls to the left as the new image from the right moves to the center. And the opposite for the 'previous' button". Currently I have the existing image disappearing (alpha 0) and then the new image scrolls to the center from the right - which is not what I want to do.
Here's my current script:
import mx.transitions.Tween;
import mx.transitions.easing.*;
function loadXML(loaded) {
if (loaded) {
xmlNode = this.firstChild;
[Code] .....
I'm really new to flash, and just taking an intro level course at the moment.Anyways, for one of my projects,I wanted to load some .jpg files onto the stage, and make buttons from certain aspects of the image.So for example,I have an image of a coconut that I wanted to make a button out of.Right now I am trying to use the pen tool to outline the shape of the coconut, and then create a symbol from the pen tools shape.However, I'm obviously not doing something right, as when I turn the image into a symbol, instead of creating a button symbol from my outline with the pen tool, it just turns my whole .jpg file into a symbol.
I want to be able to make multiple clickable buttons from a single image,I know how the coding will work once I can make the individual buttons, but right now I seem to be missing a step.
I have 2 buttons that i made an up arrow and a down arrow. I would like them to move an image up or down on mouse click. Although i made the button rollover actions previously and i got the script below from researching online. Now I am not sure if i should even bother with it. I thought if i could get the actionscript to recognize the buttons and tell it what to move the (the ad) I could get them to work. But haven't figured out how to do that and if i have to make custom buttons for this. see what i have below thus far.
[Code]...
I try to implement a gallery of image with two buttons on each side of the picture to go to the next or the previous image.
This is my code:
leftButton.addEventListener(MouseEvent.CLICK, ButtonLeftHandler);
rightButton.addEventListener(MouseEvent.CLICK, ButtonRightHandler);
function ButtonLeftHandler(event:MouseEvent):void {
trace("Mouse Button Left clicked");
picIndex--;
[Code] .....
On my output, I get
Sequence Stopped
When I clicked on a button. I don't get the trace message "Mouse button left..." My sequence is blocked.
I have been trying to figure out this problem for a couple days. I made an animation using actionscript 3.0 and the GreenSock TweenLite to load images in through XML in flash. When you click the button (btn1) to go to the next image, it animates in perfectly, but since I am multiplying 140 each time, if I click btn1 while the image is transitioning in, it adds another 140 to that value and the next image goes off the screen. Think of it as a slot machine effect, witch is pretty much what it looks like. The images load in as if they're on a reel, vertically. I would like to know how to set a limit so that instead of adding 140 to the value, it goes to the next image instead, and centers it perfectly in the mask I have set up. Do you guys get what I am trying to do? If not, I can zip the folder up and attach it here, but it's a project for a client so I'm a bit weary.
Again, quick summary: btn1, if clicked more than once during the span of the image transitioning in (through XML and gs.tweenlite), the image gets 140 added to its positional value and goes off the screen.
Code:
import gs.TweenLite;
var id:int=0;
var list:XMLList;
var xmlLoader:URLLoader = new URLLoader();
[Code].....
I have been racking my brain with trying to convert [URL]../blog/distortimage into as3 im am very unfamilier with flex so I have become somewhat stuck can anyone I have set the buttons for transform and loading the image but its just not working at all.
[Code]...
I have loaded several images into the swf with XML and they are placed automatically. How do I make buttons out of them? I want to scale them about 20% bigger.
View 2 RepliesAny way to add 2 buttons : next_image, prev_image to this gallery [URL], when the image is loaded at full size I want that 2 buttons to apper and when I press them to load me next image or pre image
The source cod is this
import caurina.transitions.*;
var folder:String = "photos/";
var css_file:String = "flashmo_202_style.css";
var show_tooltip:Boolean = true; // true OR false
var tween_duration:Number = 0.6;
[Code] .....
[URL]
If you drag the map, it moves even beyond the edge of the map so the map eventually gets dragged off the screen. Is there any possible way to stop the map moving any furthur than its boundry?
The source is here - [URL]
I am trying track to see if mouse is between 0 and 200 pix in the Y coordinate, then do an if statement.
stage.addEventListener(MouseEvent.MOUSE_MOVE, mousePosition);
// I use this to track readings.
function mousePosition(event:MouseEvent) {
[code].....
When I use 3D rotation tool, there is an option called global transform, if it turned off, the object would rotate by its own axes, this is exactly what I want. How can I do rotatation like that with AS3 code? Is there any property if changed then rotationX/Y/Z would rotate object by its axes?
View 4 RepliesI would like to base one component's x and y cooridnates according to another, I tried using the binding notation but it doesn't seem to work
[Code]...
I've usually designed Flex applications myself but this time I'll need a designer to assist with skinning the application. I've worked with this designer for a while, and we could work well on an HTML/CSS environment. He can't code, he sends me sliced PSDs which I could convert to clean code. But I'm not sure how to have him assist me with Flex UI as he's not familiar with the components.How do you guys interface with designers for your applications?
View 2 RepliesI have a problem when one B.swf file is loaded to another A.swf file.A.swf file size is 400x400.B.swf file size is 100x100.B file has a movie clip (MC) which is animated and position of this movie can be from Y:-100 to Y:200. B file is loaded into the center (X:150, Y:150) of the A file.When B file is loaded, then animation starts. I have a problem: I can see animated movie clip B out of B screen scope (for example: when B.swf file movie clip has _y = -100 I still can see that movie clip in A.swf). I am expecting that movie clip will not be shown if Y position becomes negative
View 1 RepliesI have a flash application and I use papervision3d library. I put my objects to the scene, no problem but I also want to show the coordinate axes (x,y and z) to user. Is there any way to show these axes?
View 2 Repliesour collaborators misposition the registration points of MCs.Here's the deal: we need to recover the REAL MC's coordinates (not the ones based on registration point). Is it possible? How? I've tried some code already (like getBounds and getRect functions) but all of 'em consider the registration point.
View 4 Replies