have a clip, and I want to redraw only an area of that clip.Therefore I use the following code where I use a simple rectangle with "hello" written inside it, its dimension are 200*100I want to redraw only a part of 50*20 of that rectangle. Here is the code I used :
var clip:MovieClip=new MovieClip();
clip.graphics.beginFill(0x990000,1);
clip.graphics.drawRect(0,0,200,100);
[code]......
I created a simple drawing program in Flash CS5. I need to be able to draw on top of a movie clip, but the drawing always goes behind.[code]
View 4 RepliesI'm trying to implement a multiple file uploader and expose and API for javascript. Even though I think I can handle urlrequests, I'm having a hard time making a SimpleButton.I want the button to have the size of the movieclip/sprite that I create. I'm trying without luck to make a movieclip of 130px x 30px, and have a simple button that fills the entire area. What I try to do in actionscript:
private var _button:SimpleButton = new SimpleButton();
private var _fileList:FileReferenceList = new FileReferenceList();
private var _buttonShape:Shape;[code].......
I'm using intelij to compile this. how to build it with the SDK alone.
I'm using BitmapData.Draw to draw a masked movieclip to a bitmap.Flash behaves very strangely in many different ways. To give a couple examples:1) Normally, the position of the mask is relative to the masked object. Ex. if I Draw() the movie clip at 10,10 and the mask's position is 20,20, then during the Draw() the mask will effectively be at 30,30. Weird, but consistent. However, if I Draw() the mask to another surface first, and then Draw() the movie clip, the mask position will be absolute (20,20 in the example)
View 3 RepliesI am new to actionscripts and I'm having some difficulty. I am creating a website that teaches kids about the about the brain and I am creating a website very familiar to this one,[URL]..So far I only know how to draw and call a simple movie clip such as what you see below. What I am trying to do is create the features that you see on the above website. I'll try to explain as best as possible what I have done so far:
I created one flash file and drew the background for where the text will display. Next I created several movie clips for each of the brain parts and I placed an invisible button over each of these movies. For example I told the button, "cerebellum_button" to play the movie "cerebellum_mc" and told it to go to the "turnon" label." Once it stopped at the label "turnoff" it displayed the text for what the cerebellum does.
I don't think that the below method is efficient, I feel that my code is redundant because I�m having to create a button for each animated movie clip, then each one of those movie clips displays text. It seems to me that I can somehow create a text in a centralized location and call it. However because I am new at this stuff I have had to create text in each of the movie clips. Is there a way that I can centralize all of the text then call it? My aim is to have the user roll over the brain part, have it animate, and have it display the text to explain what that brain part does. So far this is what I have working, I have one button and one animated movie that includes text.
cerebellum_button.onRollOver = function(){
cerebellum_mc.gotoAndStop("turnon");
}
cerebellum_button.onRollOut = function(){
cerebellum_mc.gotoAndStop("turnoff");
when i attach a movie clip is it possible to draw it on the bottom layer of my clip?i'm generating a star field, btu the stars keep appearing on top of other static images.
View 4 RepliesIm trying to use BitmapData.draw() on a movie clip, thing I noticed is that this method always draw from the top left of the movie clip, is there a way to "center" the draw method somewhere else on the mc?
View 1 RepliesI am trying to create a gallery where the thumbnails scroll across the bottom and when you click on the thumb a new large image opens up on top of it from the same image.
What i would like to do is open up the large image but draw a box around this image so it blanks out the background of the site and all you see is that picture.
Its a similar function to the way this site works;
[URL]
I was wondering if anyone could tell me how and if it is possible to draw a line/ circle and place a movie clip on it and get the movie clip to go round the circle by placing the left and right arrow keys on the keyboard.
View 0 RepliesI am new to actionscripts and I'm having some difficulty. I am creating a website that teaches kids about the about the brain and I am creating a website very familiar to this one, http:[url].......
So far I know how to draw and call a simple movie clip such as what you see below. What I am trying to do is create the features that you see on the above website.I'll try to explain as best as possible what I have done so far:I created one flash file and drew the background for where the text will display. Next I created several movie clips for each of the brain parts and I placed an invisible button over each of these movies.For example I told the button,"cerebellum_button" to play the movie "cerebellum_mc" and told it to go to the"turnon" label."Once it stopped at the label "turnoff" it displayed the text to explain what the cerebellum does.
I feel that my code is redundant because I�m having to create a button for each animated movie clip and in each on of the movie clips I have text that will display. It seems to me that I can somehow create text for all of the movie clips in one centralized location and call each one of those text by using labels. Is there a way that I can centralize all of the text then call it? My aim is to have the user roll over the brain part, have it animate, and have it display the text to explain what that brain part does.I have one invisable
button and one animated movie that includes text.
cerebellum_button.onRollOver = function(){
cerebellum_mc.gotoAndStop("turnon");[cod].....
for example:
var mc:MovieClip=new MovieClip();
mc.graphics.beginFill(0x000000,0.5);
mc.graphics.drawRect(0,0,100,100);
[code].....
I need t draw a rectangle on a movie clip(board_mc) by dragging mouse over it......It works fine till here but I want to put the movie clip(board_mc) in scrollpane.
but after doing so the code doesnot work....can u plz guide me how to make this code work after placing the movie clip (board_mc) in scrollpane(say board_scp).
[Code]...
I am targeting a a movie clip. The problem is that all the syntax I have found for targetting clips looks like this: _root.sample_mc.sample2.mc. etc. The problem is, my target clip is in an swf that I've loaded into a container clip from my main timeline. So, essentially, I have a home.swf that loads menu.swf into a container called 'location'. In menu.swf, I have an MC called center, which contains the MC I am targetting called 'target'.
View 2 RepliesI want to loop through a movie clip and assign a function to each of the clip's child movieclips. when i do a for...in loop and then do a typeof() trace I get "string" and obviously it won't let me assign lets say 'onRollOver' functions to the children.
View 6 RepliesI'm trying to set up an expandable clip that resizes with the browser window with a main clip centered over the top. I know it has something to do with a stageListener.
View 1 RepliesI created a swf which loads multiple external swfs to 100% before playing. Which works fine. If I stop a clip while it's loading, I call loader.close() and I'm able to resume from where I left off at a later time. The problem I'm having is when I added the functionality to load the next clip while the current clip is playing. To be clear, I'll refer to the normal preloader as preloader, and the preloader which loads the next clip as pre-preloader. If the pre-preloader loads to 100%, everything is good. The next clip will play immediately without having to wait. If, however, the pre-preloader for the next clip is stopped at any point before 100%, the preloader will start loading at 0%.
With that being said, If I go back to the previous clip (which was previously already playing), the pre-preloader will pick back up where it left off, then if I go forward again, the preloader will pick up where IT left off.
[Code]...
I'm trying to get a movie clip to automatically load up another external clip, after playing an embedded flv.
This is what I've tried so far:
var holdFrame = setInterval( holdFrame, 5000);
gotoAndPlay(
_root.mc_holder.loadMovie("swf/library.swf"));
clearInterval (holdFrame);
Although it throws no errors, the setInterval is ignored and it just loads direct into the next mc clip.
So I have an array of eight mcs arranged in a circle around a larger mc and I want to make it so the user can click and drag any one of the mcs in the array and it will cause them all to rotate around the larger center mc. I can rotate one clip around using an ENTER_FRAME listener but since I want them all to rotate and not until the user clicks and drags.
View 0 Repliesi have a problem with hitTest, i want when my mouse is on the leaf movie clip the movies clip disappear. or away any where
[Code]...
I am importing a movie clip as a symbol from a SWF using Embed to a AS3 program and, after attaching the movie clip to the stage, the movie clip keeps repeating. Before you ask I have indeed creating a script layer and put a "stop()" on the last frame. In fact the swf containing the symbol works perfectly fine when executed on its own or in Flashdevelop (my choosen IDE). Its only when imported does the clip keep repeating.Here is the code:
Code:
package {
import flash.display.*;
[code]......
I would like play head of a movie clip to return to a certain frame of that clip so a MC inside it would loop. I now have: stop(); as the action.
View 2 Repliesi've tried placing the code in the actions pnel of the mc; on the mc at the main time line and in various other unspeakable places... but i always get the same error warning me that this code can only be used in movieclip instances and that my stupidity levels are reaching dangerous levels. (error: 'Symbol=stage_mc, Layer=actions, Frame=1: Line 5: Clip events are permitted only for movie clip instances
onClipEvent(enterFrame){'
i fear somebody will reply to this with:'the code goes on the movieclip instance'...at which point i will take up a career in knitting (i knew i shouldn't have given up the course in the first place)
I want to load a random movie clip from the library to an empty clip on the stage called (bg_graphics). the clips in the library are called (green, blue, yellow).
View 5 RepliesI'm writing a card game in AS3. The artist I'm working with has produced (in Flash CS4) a single swf-file containing all the card graphics and animations. The structure of the fla working file looks something like this:
- Scene
- CardGraphics (Movie Clip)
- CardFront
- CardBack
- CardValueImage (Movie Clip)
In the program I create 52 instances of my Card class, each having a MovieClip instance created from the loaded swf. The idea is to set the frame of the CardValueImage MovieClip to correspond to the Card instance's suit and rank member variables. However, I can't figure out how I access CardValueImage and call gotoAndStop (or whatever method I will need to call).
[Code]...
Been working on this for almost 2 weeks and I am completely stuck. I've got a main dynamic movie clip that pulls in images from an xml file. It's x position moves depending on the mouse position. Obviously its width is dependent on how many images are pulled in.
I have an indicator movie clip that runs along a 600 pixel line in the opposite direction to the main clip that gives an indication of how long the main clip is.
I know the length of the indicator's line so its x position needs to be updated in relation to the x position of the main clip. 1% of indicator's maximum movement in 6 pixels so it needs to move 6 pixels in relation to 1% of main movie clips maximum distance.
[Code]...
I have multiple movie clips on my piece. Each clip is of an an image, and when the mouse curser goes over the image, the movie clip begins (making it bigger).If you run your mouse curser all over the screen, they all activate at once.I want the clip to only activate after the mouse is on the specific clip for more than a few seconds. I know I need a timer. How do I do this? What is the code and where does it go in mine (below)?
Frame 1:
stop();
image10.addEventListener(MouseEvent.MOUSE_OVER, image10overFunc);
function image10overFunc(e:MouseEvent)
{
[code]....
I am trying to loop a .flv clip located in an array when that clip has finished. Do I add an EventListener.complete then play it again? Ummmm. This seems pretty pedestrian.
View 2 Repliesclip events are permitted only for movie clip instances onClipEvent(enterFrame) {
i keep getting this output message --- can't figure out what it means.
i've got 48 small movieclips named "1clip", "2clip", etc. all the way up to "48clip." I want to do something with them all and use a loop to affect them all the same way.
[Code]...
but that doesn't seem to work. are variables and instance names interchangeable? my lClip var traces out of course, but the lClip.imagHolder.loadMovie never happens (clip inside the clip).
Can we make something, ie a close button, that onRelease will close the parent Movieclip, regardless of the name of that parent? I'm going to need a lot of close buttons, and I don't like the idea of coding each to close the relevant MC. I've done a bit of experimenting, but not had any luck yet.
View 2 Replies
