ActionScript 3.0 :: Load Multiple Movieclips In A Class?
Aug 16, 2011
i want to create and manage 2 movieclips inside a single class. i just wrote a simple setup for this and i ran into a problem:i create 2 movieclips and want them to be displayed on stage.but only the second movieclip is actually displayed and the first one is just not visible. when i switch the order in which the movieclips are created i see the one being created last. so i totally dont know what to do here. since i am very new to flash i might be missing out on something obvious.here is my class:
I have 24 movie clips on the stage: my_menu.image_holder_mc1 thru my_menu.image_holder_mc24. I want to load an image in each one. How do I identify the holder which to add a child.
The Code I have so far is....
Code: for (var i:Number=1; i<=24;i++){ var myLoader:Loader = new Loader(); myLoader.name = "image_"+i;
I just want different-looking movieclips to move in the same way so that I will only have to edit one file if I want to change their behavior, instead of copying the class file and renaming each one, and then I would have to edit the builder function name and class name inside each one as well, even though it would do the same thing.
I've got a function to load multiple MovieClips on different rollovers.[code]But this way I can't dynamically change the movieclip instance when I call the function multiple times.
Is there a way I could use an externally loaded image in multiple movieclips? I load the image using the Loader class but how can I copy it over to some other clips?
Is there a way I could use an externally loaded image in multiple movieclips? I load the image using the Loader class but how can I copy it over to some other clips?
First of all , how can i change that "stub1.swf" to change its value like stub1.swf, stub2.swf stub3.swf etc. Also, it doesnt seem to create multiple movieclips; it only makes the one.
I would really like a class that i can use to load all my movieclips from.I have 100's of external swfs - and i want to load them to stage from one class - as they are requested.I did manage to do it one way, to get access to the stage i did this:
Actionscript Code: private var _stage:Stage;
and in the constructor code, just did:[code]...........
how to actually load the swfs, what i'm really looking for is a way to use addChild to the stage from within my class.
Following is my code for loading one video using FileReference class and it works fine [code]...
then after this, the file.name and file.size goes to mxml page and the video is displayed on stage with name and file size but the samething i want to do with FileReferenceList class, i am solving this problem from last 2 weeks but cant.
In AS3 i am using the Loader class to load in multiple external SWFs (AVM1), each of which has a short animation which automatically plays when the swf is I obviously cannot control the timeline of these (i can't use local connection etc) but would like to load in the *.swf files, so they're in memory then add them to the stage when requested. the problem is that if i load them enmass. then use addChild when they are called, they have already played through and animated pre the addChild command.
(I cannot edit the swfs at all, and would rather not load them on demand at runtime)
I have a group of 16 images that I would like to load 1 of each into each movieclip. I want image1 to be inside of visual1, image 2 inside of visual2, and so on. the images are named like, 1960s_(1).png where the 1960 (year) part is coming from the rangeNum variable. The above gives me this error: 1061: Call to a possibly undefined method addChild through a reference with static type int.
I have 50 images that need to be on stage, which will be embedded into 50 different movie clips. I named the movie clips image1-image50 and the images are in an external folder named 1-50. Every freaking article or tutorial I have found clearly explains how to upload one image, or just one at a time. I can do that, and spend 2 days renaming all the functions, but I do not want to do that. Is there a better way to just load all 50 images, place them accordingly?
Assume I know practically nothing about AS3! I'm using Flash Pro CS5. I'm trying to reassociate a flash file I've been given with its external assets and classes. In the library I have a movieclip with linkage to a class called 'StaticMap' using the base class 'flash.display.MovieClip'. am I missing a custom class file called 'StaticMap.as' that was originally located in the same folder as the fla, or is this a generic class accessible to all movieClips from within Flash?
I have a problem when making flash applications with more than one frame that has symbols placed on it in that I can't declare all of the event listeners for the objects at the same time and I have found that even if I put them all on the first frame, add the event listeners, then click through to the next frame then the buttons won't work on that frame.
Does anyone have any idea how I could solve this? I did consider myself a fairly competent AS3 programmer until I realised I had no idea how to handle this sort of thing. Solved: I initialised the clips from my external class and then addChild'd and removeChild'd them as I needed to and placed their x and y on addChilding.
I'm creating a slideshow where each slide can have:- a video or a still- 1 audio track or many (up to 3)- 1 button or many (up to 3)I was thinking that each slide can be it's own object, and then I would pass the video, audio, buttons, etc., into it as parameters:
I have a class that represents a turret in the center of my screen.When I hold down SPACE, I want it to create a "bullet"-object that moves in the direction of the turrets cannon, every frame the SPACE key is held down. I am having problems with this cause I am getting this error when I am trying to create the object:
Error #1009: Cannot access a property or method of a null object reference.
This is where the error occurs:
ActionScript Code: public function chaingun(x_:int, y_:int, rot:int, cd:Number, spd:Number, sprd:Number, life:Number) { this.Cooldown = cd; this.Speed = spd;
[code]....
PS: What happens is that when I press the SPACE key, the "turret" class event handler runs the function "Shoot_Chaingun" and that function creates a new Chaingun-object (which actually is a bullet), that inherits the x, y, and rotation of the turret, along with some additional varaibles, including lifetime. Then upon creation, I use "addChild(this)" to add it to the main stage, and "removeChild(this)" once it's lifetime is up.
EDIT: And also, I just realized I don't have a MovieClip linked to this chaingun class. How do I make sure that every time a chaingun object is made, the MovieClip is also loaded?
add some functionality to the presentation template. Currently you can only move from one page to the next. So if I want an animation on a page, no problem I'll just add a stop script at the end. No big deal. But if I want Multiple animations (just trying to replace powerpoint here) then I get into trouble.
Each page is one frame on the main timeline. Hitting left/right goes to the next frame, unless the movieclip on that frame also has additional frames. Then it should move to the next frame within that, etc.
I can't figure out that if statement though. I had another bit of script going on my first go, but ran into some issues so thought it best to create all of the scripting on the main timeline. Initially I created a boolean variable, then ran an if statement. Inside of a movieclip I switched the boolean and used the same keyboard interaction to walk through it. On the last frame of that movieclip, I switched the boolean back so the main timeline interaction kicked in again. The problem is, that's a Lot of copying and pasting of that code, and I can't figure out how to go through more than one parent. I just couldn't get it to work.
Should I just be building this thing in a Completely different way? I need to make something, so for now I'm splitting up each frame that I need different animations on and creating a different movieclip for each section. Ideally that would be contained in one movieclip's timeline. Currently one each animation's interaction will be on a timeline. So I have to duplicate the slide to add an animation. So if I have a title come in, then a pie chart, then an image, then another piece of text, I'll be stuck with 4 separate movie clips.
I want something like:if current movie clip current frame is == total frames, clicking right goes to next frame, else go to next frame of it's parent's timeline.I say the parent and not stage because the way you have to set up transitions only works within a movieclip. So you have to set up the entire slideshow within a movieclip if you want transitions between each slide. Right? I don't care about transitions for now, but will want control of those eventually.
I have 30-40 movie clips that I want to reshape. They are all identical except for color and name. Is there a batch way to duplicate the entire library but change the shape without going into each one?
I have a few movieClips and I would like them to play one after the other. [At end of MovieClip play next movieClip]. Using AS3 to Tween, this is my first Clip props. import fl.transitions.Tween; import fl.transitions.easing.*; var myTween:Tween = new Tween(FloatRight_mc, "x", Regular.easeOut, 22.00, 495.95, 3, true); var myTweenAlpha:Tween = new Tween(FloatRight_mc, "alpha", Regular.easeOut, 1, 0, 3, true); How do I get the next movieClip to start playing before its completion, and so on?
I am a newbie in flash Action script2can anyone please tell me that how can i duplicate a movieclip to as much numbers i want through out the stage using actionscript2. i have searched lots of posts in sites but i can't get it
I am making a website with complete external xml data holding text and urls to images. I have several categories. One of the category has three sub categories as menu. When I click btn1 it gets the xml and start making text field, rectangles, lines and picture frame for thumbnails. Before that I use a single movieClip container to hold all that stuff and then point it to mask and scroller too.That is working fine. Now the problem is that when I click on btn2 I want to remove previous container and make a new one.
Now what happening is that it is creating one more container of different xml and putting over the previous one. I have used removeChild command and it is still not working. It only works if I use it alone and do not create a new container. All this process is done on a movieClip. That movieClip holds container, mask and scroller. The only thing that is made dynamically is the container. Rest of the items are on the timeline of the movieClip. I need to remove container inside of the movieClip and make a new container inside the movieClip.
I have several movieclips in my project which are being used as buttons, and when you rollover the mc's the content is viewable the entire time the mouse is hovering in the area of the movie clip, once the mouse moves off it disapeers. Great. I have the code that allows this to happen, but i have multiple mc's and only one works at a time. Here is the code:
mc.addEventListener(MouseEvent.ROLL_OVER, overHandler); function overHandler(evt:MouseEvent):void { mc.gotoAndStop(2);
I have created a flash whack-a-mole game, and coded the 9 different x and y cordinates the 4 moles can come up on. But I can't code it so that the moles can never have the same x and y cordinates.
I have tried this code: (Barney and mulvarp is two moles. .flytt(); is the command that gives the mole a new place to be.
I'm following a tower defence tutorial and part of the code is set up so I can build towers on the "grass" movie clip. I wanted to add more patches of "grass" and gave them all the same instance name so I can be able to place towers on them, but I have the problem that I can only place towers on the first item I placed and has the instance name of "grass". I can't seem to place towers on the other patches of grass.I removed the instance name of the first patch of grass and it let me build towers on the second patch, but the second patch only.
I have 3 movie clips in my scene and they all function properly individually.Problem: only the first movieclip will work in my test of the full scene.If I move a movieclip from the bottom to the first position in my scene, then it will run while the others are stopped I can't figure out how to tell the program to activate all 3 simultaneously - so each button (linked to one scene in the movie clip) will be available to click.The code from each movie clip essentially looks like this
i basically have some images of logs (for a bridge) setup inside a movieclip called log_mc, inside log_mc each log has its own movieclip log1_mc, log2_mc and so on
So I'm trying to shoot multiple bullets out of my body and it all works except I have an odd problem of just one bullet showing up and updating to set position for the new ones. I have a move able player thats supposed to shoot and I test this code by moving the player and shooting. Im taking it step by step in creating this.
The result of tracing the bulletContainer counts correctly in that its telling me that movieclips ARE being added to the stage; I Just know it comes down to some kind of logic that im forgetting. Here's My Code (The Bullet it self is a class)
multiple classes and then register each movieclip from the library to a different class? It isnt working for me. I created two different classes and created two entire different movieClips and registered each movie clips to a different class. However, I can only use on movieClip at a time, when I use the duplicateMovieClip. command to create copies of the movieclip, i find that only those movieclips, whose class i declared first, appear on stage
