I am trying to upload my demo reel. I compressed it to an FLV file, and used the import video command with the setting' "Load external video with playback component." After selecting my skin and hitting ok, I got a prompt that said "Netstream.play.stream not found." Why isn't this working?
View 2 RepliesI got a bunch of live stream from FMLE, say: "FMLE_channel1", "FMLE_channel2", "FMLE_channel3". And then on the server side, I created several corresponding republished stream called "channel1", "channel2", "channel3".
On periodical basis, we call Stream.get("channel1").play("FMLE_channel1", -1, 10, true) every 10 seconds. Similar things were done on the second channel & third channel.Soon after the above Stream.get("channel1").play() call, I should get the following events in sequence:info :NetStream.Unpublish.Successinfo :NetStream.Publish.Startinfo :NetStream.Play.Resetinfo :NetStream.Play.Start In the above case all are happy. Clients can view channel1, channel2, channel3 well.But then after a while, one of the three channels, in most case it would be channel1, will not be viewable.
With the server trace info, I found that after the Stream.get("channel1").play() call, only the following two events exists:
info :NetStream.Unpublish.Successinfo :NetStream.Publish.Starti.e. I was missing the play.reset and play.start event.I further checked and confirmed that the FMLE was publishing all three channels fine to the server. I was able to view the "FMLE_channel1" from flash clients, but not the republished "channel1". the version is FMS 3.5.0.
NetStream.play(streamName, -1); This seems to be working wrong.if I have recorded an flv on server using FMS and FMLE with only audio with name "myaudio" and then after if I try to play a live stream using NetStream.play("myaudio", -1) then it plays the recorded stream. I believe that documentation says that it should start a live stream instead of playing recorded stream as the second argument is -1. Is this a bug in NetStream.play method?
View 3 RepliesI have started a stream from Flash media encoder to flash media server. According to my encoder, it should be located at: "rtmp://localhost/live" and is called livestream.In the Flash software I try and set the source of FLVPlayback component to rtmp://localhost/live/livestream", and I get this error: "NetStream.Play.StreamNotFound : Adobe Flash tried to play a live or recorded stream that does not exist. Source can't be found.". Both the server and encoder is runnind and I am encoding.
View 12 RepliesI'm just trying to figure out this error message that comes up when I am importing a video into flash. It says: 'NetStream.Play.StreamNotFound: Adobe flash tried to play a live or recorded stream that does not exist. Source can't be found'
View 2 RepliesI am using NetStream, NetConnection and Video object to play an mp4 file which is hosted over a web server using http.This is an AIR application and the relevant code is pasted below:
var url:String = <some http url>;
connect_nc = new NetConnection();
connect_nc.connect(null);
[code]........
i am trying to create an MP3 player using AS3. when i competed my server-side and client-side coding i ran it. MP3 plays not more than 5 seconds and there occures a reference error.(ReferenceError: Error #1069: Property onPlayStatus not found on flash.net.NetStream and there is no default value.). what are the reasons for that errors? can i overcome it?
View 2 RepliesI have recently installed FMIS 3.5.3. In checking the access logs I find data in both logs that display the same stream stop and stream play time .I'm not sure why the time is the same (00:19:27 example below). Videos play fine when testing from work (T3 connection). However, occasionally a very slight hesitation when playing video from home (I have cable connection). [code]...
View 4 RepliesIn Flex you can stream microphone audio to an FMS/Red5 server using NetStream.attachAudio, which requires a Microphone object. Is it possible to stream audio through the NetStream from somewhere other than a Microphone? For example, from a file/embedded resource?
The reason I'm asking is that I'd like to be able to run automated tests that don't require using an actual microphone.
these codes works perfect on local web server but doesnt on real web server.[code]
View 0 RepliesI have a publisher who publishes a netstream using stratus p2p. This is then connected to by player who subscribes to the netstream.
I believe one can reject the subscriber when the stream tries to connect by using the onPeerConnect method of the netstream's client. However, I would like to boot the subscriber after they have been connected.
There are potentially other subscribers to that netstream so I cannot just close it. How would I boot a particular subscriber without closing the published netstream?
How to send a video data stream from one side written by java to another side written by flex and then display it? I just know that on flex one method is to use netstream class get the real-time video stream and bind with a videodisplay to display it. But which class I should use to send this video stream in java and which class I need to use in flex to receive this flow and pass it to the NetStream class?
View 1 RepliesI have a FMS and it works perfekt. What I try to build is a simple "player" for a website where I can listen to the livestream from my FMS. To connect to my stream works fine. But now i want to build a animated volume amplitude. It works with an mp3 who is on my FMS but not with the livestream. I think I found the problem why it does not work but not the solution.
I have following to connect to my livestream:
Code:
var nc:NetConnection = new NetConnection();
var ns:NetStream;
nc.connect("rtmpe://10.0.0.227/live");
[Code].....
Maybe I must create a new SoundChannel for my NetStream but I don�t know how!?
I would like use NetStream class to stream AAC audio file stored locally on server (because i can't use Sound class, AAC not compatible) How can i do this ? (without flash media server)
I have tried using http protocol, no errors occured, but i receive no audio data.
I am developing a C++ program to connect FMS via RTMP, and then publish a live stream I can't use FMLE here because I need collect the H.264 NALU from somewhere and forward them to the FMS.I write a demo app, which parses H.264 encoded FLV file, and send the VideoTag in the FLV as RTMP Message content for publishing.Finally, I make it run and I can see some frames of video!But the problem is: The video does not play smoothly and it just updates some frames.
Then I looked at the NetStream event and found that:Everytime when there is a NetStream.Buffer.Full event, the frame in the video is updated and display correctly But immediately there is another NetStream.Buffer.Empty event followed and the video is frozen.
[code]...
I have a frame that has a movie embedded in and a main menu button.I have several in the presentation that work fine.This one will not.Is there something that will keep a button on the stage from working when movie clip is present.My movie has the following error:The video player is in the connection error state.It enters this state when a video stream attempted to load but was unsuccessful. There are two possible reasons for the error: no connection to the server or the stream was not found.It plays fine on the stage. My button code is:
menu_btn.addEventListener(MouseEvent.CLICK, main1);
function main1(event:MouseEvent):void
{
gotoAndStop(51);
}
I have a "movie player" that plays flv files using the code below (videoToPlay is the name of the file to play and is just a string). I want to use the same setup to play an mp3 file also.I tried using mySound = new Sound(); and then mySound.attachNetStream(ns);, but it gives me this error: 1061: Call to a possibly undefined method attachNetStream through a reference with static type flash.media:Sound.
View 5 Replies1) What is the recommended/best practice method for loading videos (flv, f4v, mp4, etc.) from a play list. Some of the files might be on the local file system, some might be on a streaming server and uses rtmp.
2) Does the VideoPlayer.play internally use NetStream/NetConnection objects? I could get the files to play using both these methods - not sure if one is better than the other. I didn't see any references about streaming in the VideoPlayer.play method - but it does work with rtmp URLs!
3) For a long running standalone application, how do I make sure the VideoPlayer/NetStream objects are properly released/garbage collected? Right now I am closing the netstream/netconnection after playing every file - mainly because I do not know which server/file system the next video is being loaded from.
I've successfully created an FLVPlayback component using the component library and it's playing the streaming video that I want it to. My question is, if that stream is not online or cannot be found, how would I go about displaying a message on the stage to let the user know, there is no active stream.
UPDATED:
Here's my code -
thestream.addEventListener(NetStatusEvent.NET_STATUS, onNCStatus);
function onNCStatus(event:NetStatusEvent):void {
trace(event.info.code)[code].....
There's no output still. It seems like the function isn't getting invoked. However, if I place a trace outside the function (before it), I get a response: trace(NetStatusEvent.NET_STATUS);
the output:
netStatus
I used NetStream.play("invalid-live-stream-url") to play an invalid live stream. The other arguments are using default, e.g. start = -2, len = -1.
The menu says that when we use the default "start" and "len" to call "NetStream.play", "Plays the live stream until it is no longer available. If a live stream of the specified name is not found, Flash Player plays a recorded stream until it ends."
However, I do not have a recorded stream on the server that has the same name as the live stream, and I did not get the expected "NetStream.Play.StreamNotFound" error.
The main problem is that the FLV doesn't load/play, which most likely causes the secondary problems, such as the bufferClip always visible and no way to test the video and audio scrubbers.
[Code].....
I'm using the netstream and video object to play a video in flash. Specifically a mp4 video.
What I'm trying to do is start playing the file from a specific position (Ex. 20seconds).
However with netstreamObject.seek(20) doesn't work unless the stream has been loaded past 20seconds. Is there a way to specify starting to load at 20s? Or any other way of accomplishing this?
Hoped this would ave been fixed in as3 but this event does not always get triggered. Seems to be related to the encode. Anyways I would like to see others approach to this issue.
Currently I have place a condition in the NetStream.Play.Stop event to check if the ns.time is > the duration-1;
[as]
if (ns.time > duration-1){
playing = "complete";
}
[as]
I have noticed this does even work consistantly unless I change it to ns.time > duration-2.
I've got a play/pause movie on my timeline to control an FLV via NetStream. The idea is to switch from a play symbol to a pause symbol, but it's not working.[code]Clicking on the clip will start and stop the flv just fine, but the symbol switch doesn't happen. When I take out the ns code, just to check and see if the switch will actually work, there's no problem.What am I doing wrong? How can I get my clip to change from a play to a pause symbol?
View 1 RepliesI'm recording audio using FMIS, the file is being saved out as a FLV file and I am able to play it back. Eventually that file may be deleted after some time and I would like to notify the user if the file is no longer available. I was expecting to see NetStream.Play.StreamNotFound after deleting the file on the server but I'm not getting that message. Instead I get:
--> NetStream.Play.Reset--> NetStream.Play.StartAnd nothing plays which is expected since the file is deleted, but I dont get the right message. I'm calling the file like so:ns.play ("flv:file_to_stream");
I'm streaming mp3 on flash media server 3.5 on linux version, and very often come accross with that problem, when the buffer.length become 0 on client side, the streaming will stop with NetStream.Play.Stop event, and will not be continued. I think this case it should wait always till the data arrives and never should stopping. Some more info : I tested on applications/live folder, and the mp3 files are created dynamically during the playing, and the creation speed is almost the same like the playing speed, so those are not fix files.
View 2 RepliesI would like to have the possibility to detect when NetStream is not working (i.e. the name used in initialization can't be found on the server side). The StreamNotFound doesn't work at all. I've read that it's the fault of the Flash Media Server, which automaticaly creates new stream, if it cannot be found (of course it's an empty stream - what is wrong from my point of view). Is it true? If yes, can I disable it on the server side, so I could easily detect if the stream name is correct?
View 8 Repliesi've created a sub-folder called dvr under fms 4.0 applications. i made a test of playing a video named sample.flv then at the same time i publish it to the same fms 4.0 server with a different video name: "mergedVideo".the asc at the fms server as following:
application.onAppStart = function()
{
trace("app start : " + application.name);
[code]...
Is anyone having trouble with Chrome getting NetStream.Play.Stop early in Chrome? Seems to fire around the time the buffer has filled. Same code is and has been working fine in all other browsers for some time.
View 2 Repliesi have application that streams videos from fms .i try to play video of 240 seconds, but when playback reaches 180 seconds i got NetStream. play. stop . it happens regularly at the same time.why does it happen? is it encoding of the video??
View 4 Replies