My project works as intended, but after making a minor change a short while ago, something unbelievable happened. As far as I know, I only changed a button images, but now my preloaded does not load the swf beyond frame 1.
[Code]...
If I removeChild frame animated Movieclip, will it automatically stop running the frames inside it? Actually without calling mc.stop();
View 2 RepliesI have a timeline with a bunch of frames. At the beginning of my timeline (frame 2) I have actionscript that makes movieclips that are transparent (alpha 0) visible, and also some rollover and link/button code using a tween class. On frame 3 I have other movies that are visible etc. Frame 3 has stop code, and a frame anchor named "page2". For instance for the moviedclip "page_1" I have this code:
[Code]...
I have a question about loading external data. When I had all my actionscript export to frame one, it would slow down the preloader and not show up until it was far into the progress bar animation. So I moved everything to frame 2. The problem with that is now my menus which are populated from an xml file are not there when the site starts to play. How can I get my xml data to load on frame one, but leave the .as fils to load in frame 2?
View 6 RepliesI making a game in flash and I have a timer counting down 30 seconds and when the timer runs out I want it to go to a different fame! I've no idea how to do this.. the timer is working at counting down 30 secs .
View 1 RepliesI making a game in flash and I have a timer counting down 30 seconds and when the timer runs out I want it to go to a different fame! I've no idea how to do this.. the timer is working at counting down 30 secs .
View 13 Repliesis there a way to detect the frame rate while the flash movie is running. I currently have it set to 30 fps, but i want to be able to react if someone has a slower computer so the movie is running at a slower frame rate.
View 1 RepliesI have a simple flash game with two frames at the moment.Most of the stuff that happens is in as files linked to different movie clips.I orignially only had one frame my background frame and when testing I just press ctl+enter and bamm away it goes the actionscript runs as soon as the movie/game starts and ergo the game plays.My problem is this, I now want to have a start/home frame at the beginning (of course) which has the start game button on which when clicked THEN starts the game.Currently the game starts in the first frame along with the start button.How do I stop the game running straight away and my first frame only contains the start button, which when clicked then goes to the 2nd frame and starts the game?
View 3 RepliesI have a xml gallery on one frame (each frame represents a webpage) and when i click on another frame the frames content appears but the xml gallery is still running on top of it, why how to stop the xml gallery running before going on another page. Is there like a stop function ?
the code in as3 i used for the gallery is as below:
var xml:XML = new XML();
var img_count:uint;
var loader:URLLoader = new URLLoader();
var img_holder:Sprite=new Sprite();
[Code]...
I have created a function to initaialise a menu movie clip however it appears on frame 1 but i want it to appear on frame 11 / frame label home_frm. please the finction is init();
package {
import flash.display.*;
import flash.events.*;
[code].....
I've been able to connect with a DB, use a server side ASP script to check a user name and password in the SQL Server DB and get back a score number.
login_bttn.addEventListener(MouseEvent.CLICK,sendData,false,0,true);
function sendData(event:MouseEvent):void{
var userName:String = username_txt.text;
[code]....
I have 6 frames on the main timeline each with a different movieclip. Is it possible that when one movie clips finishes running it will go to he next frame on the maintime line and run the next movieclip on the next frame with AS3?
View 2 RepliesRIGHTNOW, Im doing my game development but I have problem based on my game control.this is my question..
I have two frames. the first frame is on running movement of the character and the second frame is on standing position.This two frames has only one kind of character,but I seperated the two movement in two frames witch are running and standing positon.my problem is how can I do the mouseEvent,if onclick the character will continue on running and if on release the character will do is to standing position.
I was just wondering if anyone could help me to figure this out - I'm afraid I'm really not sure what the problem is so I'll try to be as specific as I can, if you need me to provide any extra info then just ask.Basically I have a fla file -the menu of my game- that loads external swf files (the various game modes) when the user clicks a button. I can get everything loaded in fine, but it runs at a snails pace and occassionally generates errors (mainly caused by the game mode calling removeChild()) that don't happen when the 'game modes' are run as stand-alone swf files.
Does anyone have any idea what could be causing this? I remove almost all listeners from the menu before I run the game modes, so there's almost nothing that could be using up processor power that's needed for the game - it's a pretty basic game anyway so it shouldn't be processor-intensive to my computer anyway. I've spotted a few other topics similar to this, but they're either not answered or the solution doesn't fit what I'm trying to do.
Here's what I got so far...
[URL]
when you click on the links (which, don't exist at the moment) I'm wondering if there's a simple way to have the whole flash movie run backwards and then load the next page?
I've been trying to run some functions in my class every frame and have come up with this code:
[Code]....
I get no errors, but the functions charactercamX and charactercamY are not running every frame.
I have used LoadVars to load a srt file and manipulate its content successfully on my desktop computer. But when I post it on a real server, it can't be used.Here is my code. It seems that LoadVars cannot read an external file on real server or function parseCSV(raw) cannot work on real server.By the way, real server there I mean that this flash running on website [URL]
Code:
//Display subtitle
function loadSubtitle(subtitlePath){
startTimes1 = new Array();
[code]....
I have an app. in which I have placed a ViewStack with (16) Tabs, and Im using a Timer set up to cycle every five (5) seconds through these VS Tabs automatically.
Each VS Tab has an IFrame included to load a particular web site, and I use the auto cycling to not need to go to each Tab manually and wait each time until the page loads before I can use it.
(Note: The IFrame does not need to do anything else other than to show the page nothing else)
All works very well on the work computer running the app. with CPU activity of around 20 to 30%, but when I address the app. on the sever I have increased CPU activity starting with around 30% on the first sequence, and running the second Tab sequence it is going up to around 90% in Semi-auto or Full-auto modes with five (5) seconds beak in between Tab switches and between each sequence.
To explain more in detail I do have six (6) sequences and an arrangement which uses Semi-auto or Full-auto mode (Looping).
I do use (timerName.reset) instead of (timerName.stop) and have also have used (timerName.removeEventListener .) as each Timer sequence get called separately.
I have a strange problem. When I run an exe projector that I exported from flash cs5.5, and on few of my client's computers it running very slow in full screen.When I running an swf file (not exe projector), also in full screen, it running well!I checked my clients computer hardware, and it match the system requirements of flash player.
View 3 RepliesI have a problem in Flash Site uploading.That is, i have created a flash site & in the dreamweaver i inserted the flash site as insert -> media -> Shockwave.The site is running inside the dreamweaver but when i publish it, flashsite is not running.
View 2 RepliesI'm building a flash application where the user can play multiple 30 sec .flv movies (one at a time) in slowmotion by pressing or holding down the left and right arrows keys.The user can hold/press "keypress right" to move to the next (key)frame and "keypress left" to move to the previous (key)frame in the .flv files.I have tested embeeding one .flv movie to the stage and it's working fine.But since I will be using many flv's I want to load the .flv's dynamiclly (on button clicks) using netstream or FLVPlayer. Would it be possible to step beetween keyframes in the same way if the .flv's are loaded dynamiclly? Or, must I embeed each .flv file into separate swf's and then dynamiclly load the swf's to my main stage?
View 1 Repliesload an external jpg in frame 2 with a command in frame 1? Very important to my project to get at least a yes or no.
View 4 RepliesI'm using loadMovie() to load external swf's and then send the swf to a specific frame, depending on the button that is pressed.
Code:
on(release){
_root.mc_mainloader.loadMovie("Main.swf")
_root.mc_mainloader.gotoAndPlay("fadeup");
}
Unfortunately it ignores the second line, which appears to be because the movie hasn't loaded by time it gets to the next line. As a work-around I made an interval to check for the movieclip width to be more than 0 and then run a function that chooses the desired frame, but this is very unreliable. Is there a simple way to load the clip and wait until it is finished, then immediately choose a frame on load?
After scratching my head for months about a ProgressEvent issue I decided to post my problem.I've been searching the web for a long time about my problem and all I could find was people with similar problems..But none of them had a solution.I've created a SWF file to upload files to the web server.The even triggers the progressEvent.PROGRESS to let a javascript function know when the progress has changed.When it's done uploading it triggers Event.COMPLETE.When I test my code at first it doesn't seem to work.The progress is event 2 or 3 times and then claims it's finished (While the Event.COMPLETE isn't fired yet).When the file is actually uploaded flash triggers Event.COMPLETE accordingly.o Event.COMPLETE is correct.. but ProgressEvent.PROGRESS is not.At least, thats what I thought, when I tested it on another pc (With windows XP 64bit) it worked (Magically?) tried it on a Mac and it, again, worked...why it behaves like this?
Below is my code as it is right now.
package
{
import flash.display.MovieClip;
[code].....
How do you make it so you can make a frame load on a frame?
View 5 RepliesI am using the below code on a button to load another movie, graphic.swf is there a way i can get it to load a particular frame, i.e frame 150 of graphic.swf rather then start at frame 0.
on (release) {
//load Movie Behavior
if(this == Number(this)){
loadMovieNum("graphic.swf",this);
[code]...
I have a movieclip to dynamically load swf's. Some of my swf's are slideshows and contain jpgs that are quite large. Therefore I do not want to wait till the end of a complete load to show the swf. Say, if i want to show picture 3 (at frame 3), i'd like to show it as soon as the frame is loaded. However, I also need to rezie the swf to fit my mc's fixed size. Resize only works after all bytes of the swf are loaded I believe.
View 1 RepliesI'm building a flash application where the user can play multiple 30 sec .flv movies (one at a time) in slowmotion by pressing or holding down the left and right arrows keys. The user can hold/press "keypress right" to move to the next frame and "keypress left" to move to the previous frame in the .flv files.
I have tested embeeding one .flv movie to the stage and it's working fine.
But since I will be using many flv's I want to load the .flv's dynamiclly (on button clicks) using netstream or FLVPlayer. Would it be possible to step beetween frames in the same way if the .flv's are loaded dynamiclly?
Or, must I embeed each .flv file into separate swf's and then dynamiclly load the swf's to my main stage?
I am trying to get a loading screen to work. I am using a EventEnterFrame to check how much is loaded but I continue to have problems. I use the code in the first frame on the timeline, with extra movieclips running on that timeline with their own scripts. Can seem to get the loader to display. Considering using a ProgressEvent.
Here's the loader code.
stop();
//trigger the check on every frame
addEventListener(Event.ENTER_FRAME, checkProgress);
//find total number of bytes in the file
var totalBytes:uint = this.root.loaderInfo.bytesTotal;
[Code] .....
i made simple of my project to show the problem the code
[Code]...