ActionScript 3.0 :: Search For A Range Of Numbers Inside An Array?
May 15, 2011
I have a standard array with some text items and some numbers.
Here is an array item
ge: 65, (no quotes around this number)
Here is the DataProvider line (the section that applies to my example)
DataProvider([{label:"over 60", data: 65}]);
Here is the search line
for (var n; int = 0; n<arrayname.length; n++
arrayname[n]. Age == search_age.selectedItem.data
This works fine because the array number MATCHES the selectedItem data number (65) exactly and I get all records where age is 65
BUT I want to find records whose age is any number "greater than 60"
I have tried many ways to use the > sign and keep getting an error, example:
DataProvider([{label:"over 60", data: >60}]);
or
DataProvider([{label:"over 60", data: (>60)}]);
or
DataProvider([{label:"over 60", data: >(60}]);
None of these work.
Maybe these aren't numbers? I've tried putting 'int' in various positions with no results. I'm using a DataGrid which works fine for text items and will find numbers without quotes around them (if those numbers match whats in the array!).
What's the way to write this so I can get records greater than, or less than, etc.?
View 10 Replies
Similar Posts:
Sep 26, 2011
Long story short: I want to search a multidimensional array in AS3 for (in this example) the location of 6 strings - all of which are stored in another unrelared array. Long story long: Once I get the locations (in the multidimensional array) of each string, i then know where it's located, and can access other atributes of that object - so if i found the string "box3" is located in element [5] of my multidimensional array, i can now target: multiArray[5][3] to return the 4th item stored (keeping in mind we're starting from 0, so 3 is the 4th position).
I can get this to work once, but I'm trying to set up a for loop based on the length of my basic string storage array - this array holds (in this example) 6 instance name strings - each time my for loop loops, i need to run a search in my multdimensional array for the next consecutive instance name. Then, once I've located all of them (and store the results in a new temporary array) I can dig around in each location for the info I need.
[Code]...
View 3 Replies
Oct 22, 2009
so what i understand from this im learning flash from [URL] tutorials and no matter how many times i listen to each word the guy says, i dont understand this part in the vid, we are making a die to roll from 1-6 although the code below is not the finali
[Code]...
View 1 Replies
Mar 28, 2005
for (i=1; i<8; i++) {
}
this will give me from 1 to 7 ...but if I need to exclude numbers from 3 to 5, how should I do?
i<3 and i>5 and i<8
View 3 Replies
Aug 12, 2008
well i am trying to create this simulation where in lot of numbers keep changing based on the time line. I find it really had to manually animate the numbers frame by frame. Is there a way that i can specify a dynamic text and specify a range of 50-100 and then its starts generating the numbers automatically from 50,51,52... etc, and it should reach the end range at a specified frame.
If i follow this method, animating a number from 10-50 and 1-6 will happen in the timeline of 80 frames.
View 5 Replies
Mar 28, 2005
for (i=1; i<8; i++) {
}
this will give me from 1 to 7...but if I need to exclude numbers from 3 to 5, how should I do?i<3 and i>5 and i<8
View 3 Replies
Aug 1, 2009
How to get say from 1 to 10, three randomly chosen numbers but simultaneously exclude the possibility of a repeated return (ie two 2s or three 6s)?
View 8 Replies
Feb 20, 2010
I need to get a loop to display all the numbers in a certain range. This range is input by the user with a starting number and an end number. For some reason when i put the code in all its giving me is the end number and not the numbers between the start and end. I was wondering if someone could show me what to tweak to fix it. This is the code so far...
[Code]...
View 6 Replies
Feb 2, 2011
What's a simple way to generate random numbers with a range?
View 2 Replies
Aug 16, 2010
I am almost finished with my project and I am once again stumped on how to tackle a search feature. I have one more section to do that will be a printing function.
Having an XML file, I need to search this file based on a range for criteria.
My XML data will have many sets of data separated by a gamenumber tag. The gamenumber is unique in value but the sub data will not be. There will be same values in that range.
So what I am looking to do is search anywhere from 2 to 10 gamenumbers at a time with 2-10 numbers. These numbers are in an input box and get called from a click event listener.
I have the routine working to search 1 data set but I can for the life of me think of how to do multiple data sets in one shot.
Here is an example,
Search games 2-5 for numbers 2 7 13 19 43 80 etc... Each number is in it's own input box.
The results could be an array or 4 different strings. It should be dynamic because the searches will changes from 2-10 games.
I am using an if else if statement to separate the searches and run it's own routine. So when the start number is not null and the second search number is null, it only searches a single record. The search parses only the data based on the start number search input box.
But if the end number is not null, it will go to the routine and search the scope of the the number range. I am thinking that the routine starts with the start number and then use each gamenumber in a loop to parse the data for that game only and store the results. Append each result into an array or strings.
I looked at for each and for in loops but I am not seeing who to put it together yet.
Here is what the XML Data looks like
Code:
<?xml version="1.0"?>
<Container>
<Game>
[Code]....
View 1 Replies
May 5, 2003
how do you specify the range of numbers in in math.random()?
View 9 Replies
Jan 19, 2010
I'm looking to create an AS3 driven animation that animates starting from 0 to 365. I would like to have 0 appear at the start and then randomly and slowly start spinning through numbers really fast ranging from 1-365 for about 5 seconds and slowly end on 365. How complex would something like this be?
View 2 Replies
Oct 19, 2008
I need the switch case to recognize a reage of numbers e.g. 153 - 155. Is there a way of doing this?
View 3 Replies
Jun 1, 2011
I want to restrict a text box to to use a specific range of numbers, say from 35 to 40.[code]...
How do I restrict it to only allow the 6 numbers between 35 and 40?
Is my only option to use a control like a combo box and fill it with the numbers I want to appear?
View 2 Replies
Sep 16, 2007
Im trying to create a list random numbers from 1-30 but only 10 will appear. but i also need to make sure that the list of random numbers will not have duplicates (eg 1,1,20,14,3,28,4,1,18,21). I had the thought of using an array to store the list of numbers but im stuck with how to properly use an if..then to check if the same number has already appeared.
_scriptRookie
Code:
function randRange(min:Number, max:Number):Number {
var randomNum:Number = Math.floor(Math.random()*(max-min+1))+min;
return randomNum;
[Code].....
View 6 Replies
Mar 7, 2012
I have been using Actionscript 3.0 in Adobe Flash Builder for a few weeks,and I really like it! Bare with me because I'm not really good at it, yet. Anyway, I was wondering how would I go by adding up odd numbers from an array of numbers? I know how to make all of the numbers add up, but adding only the odd numbers I'm not so sure how to do it.
View 5 Replies
Jul 3, 2006
I'm trying to create an simple (yet I still can seem to do it) task where a user has to enter a prevously worked out number into an input box clicks a button and get a correct or incorrect message.I need the number that they enter to be a numer within a range ie. 1.0 to 1.9I have 2 text boxs on stage... 1 an input text box (called inputBox) and the other a dynamic text box (called answerBox) also the is a button on stage to exec the scripton the root timeline the script is:
Code:
numbers = ["1.0", "1.1", "1.2" etc etc];
function checkNumbers () {
[code]....
View 2 Replies
Feb 1, 2012
How do you add a range of number within an array? for example my 2 arrays consist of 1-30 and 31-100.[code]...
View 2 Replies
Oct 4, 2009
I've run into a strange Vector out of range error when trying to splice a Vector array. The idea is to cut off the Vector array after a certain point....
var vec:Vector.<int> = new Vector.<int>();
vec.push(1);vec.push(2);vec.push(3);vec.push(4);vec.push(5);
vec.splice(3,vec.length); // output RangeError: Error #1125: The index 5 is out of range 5.
The strange thing is that it works perfectly, if I change the Vector to a regular array like:
[Code]...
View 2 Replies
Jan 10, 2012
So I have an array with six values stored in them. The values will either be 1 or 0. I need to sum them up so that I get a number ranging from 0-6.
View 2 Replies
Oct 4, 2009
I've run into a strange Vector out of range error when trying to splice a Vector array. The idea is to cut off the Vector array after a certain point...
ActionScript Code:
var vec:Vector.<int> = new Vector.<int>();
vec.push(1);
[code]....
View 2 Replies
Mar 20, 2009
The Setup: For each movieclip the hittests a set of "target" movieclips an array is given a value. If mcIcon1 is dropped onto mcTarget1 the first number in the vacant array is given the value of one. The Issue: If I remove mcIcon1, for example, from the mcTarget1 movieclip I can't find a way of just removing the 1 from that array without the rest of the array numbers being reset.
[Code]...
View 9 Replies
Aug 14, 2009
I want to subset an array. I have the following array
[Code]...
Now based on user requirement I want to select a range of sell data for some month.For example sometime it may be sells data from Apr to Dec,sometime may be Jul-Oct.How can I do that without hampering the original array
View 2 Replies
May 29, 2007
I was supposed to set the validate range for the Name field to be checked with an array of 3 names, the validate range for the Password field to be checked with an array of 3 passwords, and the validate range for the State field to be checked with an array of 3 states in order to create my own error messages.
stop();
var errors:Array=new Array();
function clearForm() {
name_ti.text="";
state_ti.text="";
password_ti.text="";
[Code] .....
View 5 Replies
Feb 1, 2004
Is it possible to create a search button inside of a "button" symbol? aaaaaaand have it only appear on the "over" state of the button?
What I want to do is have an image and then when the mouse hovers over it, it reveals (over the image) a search field where you can then enter information and search. I don't want the search box to be revealed when the mouse isn't hovering over it. I've tried alpha, everything.
View 6 Replies
Jan 28, 2011
How to include google search page inside of my flex web application without using iframe.
View 2 Replies
Feb 8, 2009
Is there anyway to create a search engine that runs inside an swf and that will index and search an entirely flash based website?[url]...
View 0 Replies
Apr 3, 2009
I'd like to know if it is possible to have a search field �nside a flash site that search for text content
View 3 Replies
Feb 25, 2012
The content of the array respuesta is: Africa, Europa, Norteamerica. The content of the array resultado is: Incorrect, Correct, IncorrectI created a Array to include both of them:
var contPre:Array = [ this.respuesta, this.resultado ];
and then:
for ( var row:int = 0; row & lt; contPre.length; row++ )
[code]....
View 2 Replies
May 11, 2011
I want to add search icon inside the spark TextInput control. Is there a way by which I can extend the TextInput control and add a child to it.
View 1 Replies