I have the follwoing code but I Cant figure out how to make the sound play after 3 seconds.
Code: Select allvar fl_SC:SoundChannel;
function startAnimation():void {
var s:Sound = new mySound();
[code]...
I get the following error when I compile the file with the comments part taken out.Scene 1, Layer 'Layer 1', Frame 1, Line 61061: Call to a possibly undefined method start through a reference with static type Class.
I try to switch or change a server-side stream, it starts lagging after 2 seconds of playing and sound disappears. Here are scenarios that result in that terrible lag:
1. I create server-side playlist with stream.play() with reset=false; when it is time to play the next movie in the playlist, it starts lagging after 2 seconds.
2. The same problems appears when I just switch streams. I installed FMF Feature Explorer and tried to launch SwitchStreams sample application: the same problem - server stream starts lagging after I switch streams with stream.play().
I tried on different servers (local and remote), with different players (debug player of FMS Admin Console, Standard Flash videoplayer component, OSMF player, Flex video player). I also tried all possible flv, f4v and mp4 file compression options for video files - still the same problem. I have also tried literally thousands of Application.xml settings: changing buffer, buffer ration etc. Is there any tip where I should search for a solution?
I'm working on an interactive flash software which consist of playing audio and showing slideshows, for each slideshow there is a corresponding sound clip.
To organize the sound so I can easily pause and play it, I make the sound as movie clips and put them on one layer. When there is a slide change, I put a keyframe that consist of the corresponding sound movie clip for the slide, and delete the previous sound movie clip from the stage.
However, when I do gotoAndPlay() to the beginning of slide 2 from slide 3, the sound for slide 1 started playing too. I'm confused since I have deleted the first sound movie clip just before the beginning of the slide 2.
I'm trying to figure out how I can make the sound file that I load into Flash start at x seconds and end at x+30 seconds.So basically, I just want a 30 second sample to play starting at a specific time position. Does anyone have any advice on how to do this or have links to somewhere I can read up on it?
View 4 Replies1) I want a 60 seconds video to start playing after 40 seconds have been downloaded - to do that I set the NetStream.bufferTime to 40 seconds and retrieve "NetStream.Buffer.Full" event causing the video to really start playing. This step is OK.
2) However, the "NetStream.Buffer.Full" causes data to stop downloading. So the remainder of the video begins to download no sooner than after the 40 seconds have been played. This step is my issue. Can anyone tell me how to avoid this unintended effect? (i.e. playing a video and downloading data at the same time?)
I'm having some trouble getting the following code to work - trying to use the new Sound.extract() function to get two seconds of a Sound into a ByteArray, and then create a new bytearray with a WAV header, and then output the file. The resulting 'test.wav' file sounds very wrong although slightly recognisable? I think I may have some of the WAV header settings may be wrong but I'm not quite sure what's the matter and after a long time scratching
[Code]...
Ive attached sound in to mySound variable. How to get how many seconds the sound in mySound have played?
View 1 RepliesI have a layout with narration and a nav bar. When I click a nav button for section 2, the audio from section 1 (set to stream) continues to play over the audio for section 2. This cumulates so if I click buttons for sections 3, 4 and 5, I get five audio files playing on top of each other. Sections are individual movie clips with embedded audio streaming on a Sounds layer in each movie clip.
View 3 RepliesI have a sound clip that I'm loading externally into my flash file. The code I'm using looks like this and is placed in the as layer on the first frame,
var mySound:Sound = new Sound();
var myChannel:SoundChannel = new SoundChannel();
var myTransform = new SoundTransform();
var lastPosition:Number = 0;
mySound.load(new URLRequest("introaudio.mp3"));
myChannel = mySound.play();
[Code]....
I am creating a game that has 6 movieclips all on the main time line of the game. Each movie clip has three buttons that when clicked plays, pauses or stops a sound clip.When I press any of the sound clip play buttons that sound starts playing, the problem is when I click any of the other sound clip play buttons those sounds also start to play. Is there a way I can disable the other sound clip buttons while the current sound is playing then enable all of the buttons when the current sound has stopped.
This is the code that creates one of the sound objects
[Code]...
So I made a few buttons with sounds within them and when I publish it they work just fine. But what I want them to do is;
Say I click a Button.The sound starts playing.Then I click it again, before the sounds done playing.I want it to stop the playing sound and start playing the button I just clicked on, whether it be the same button, or a different one.Right now it just ends up sounds like an echo because it'll play it as many times as you click it.
I have multiple movie clips on my piece. Each clip is of an an image, and when the mouse curser goes over the image, the movie clip begins (making it bigger).If you run your mouse curser all over the screen, they all activate at once.I want the clip to only activate after the mouse is on the specific clip for more than a few seconds. I know I need a timer. How do I do this? What is the code and where does it go in mine (below)?
Frame 1:
stop();
image10.addEventListener(MouseEvent.MOUSE_OVER, image10overFunc);
function image10overFunc(e:MouseEvent)
{
[code]....
I'm trying to play a sound using a technique found here (play the sound by sampling raw sound data gathered from the original with extract()), with the difference that the mp3 sound is embedded in the swf, not loaded externally. This is my code:
var soundBytes:ByteArray = new ByteArray();
var mp3sound:Sound = Sound(new Sound1_design()); // this is the embedded sound
mp3sound.extract(soundBytes, int.MAX_VALUE);
[Code]....
This works, in a way, except that the resulting sound is distorted (it has a kind of a metallic ring).
I am loading small sounds dynamically with the loadSound command. These small sounds are activated with a rollover. see script below. This works ok. however. i want the first sound to keep playing while the rollovers load sound. a bit like playing the piano. This works ok when i import all the sounds into the library and place them on their very own button. however the size of the flash movie increases to 140k. whereas when i load them dynamically the size of the movie is 20k. obviously i want to load dynamically.
But with dynamic loading each sound stops when another sound is rolled over, so that there is only ever one sound playing at once. I need to load the sound into a different level or something, so that the first sound can keep going while the smaller, shorter sounds play over the top. this is my script below. The first sound loads when the movie starts. This is the one i want to keep playing. Then there are the smaller ones with rollovers. does this make any sense? there's actually 13 little sounds.
[Code]...
I have been trying to figure out how to play the last x seconds of a mp3 file depending on a variable. I could not find any examples/tutorials that are close to what I need.
The thing is, I have an animation that lasts 9 seconds (this is a variable), I want the sound file to last 9 seconds as well.
ok so i have a button that plays an animation for fire when held down. and when realsed goes to and stops and frame one. when it reaches the end of the time line it goes to and plays at frame 10 and goes back to the end of the timeline. I have a sound for the fire animation that plays for the effect. The problem is the sound keeps going untill its over even if the button isnt held down. and when the playhead reaches the end of the timeline it goes to and plays and frame 10 and it replays the sound. if i hold it down it will just keep playing the sound over and over from start to finish. what i want it to do it when i hold the button down i want it to play the sound and when released it stops the sound where ever it is at. I also dont the sound to play again if there is a sound already going to stop it from playing 20 sounds at one time it gets loud and you need asprin after about 5 seconds of that.
View 2 RepliesThe thing I don't understand is how to assign a sound to a soundchannel without playing the sound. All the examples I've seen do this.
Code:
_SoundChannel = _sound.play();
_SoundChannel.stop();
And how can I set a SoundChannel volume to zero before allocating a sound to it?
I want to Display images at every 10 seconds while music is playing in Action Script 3.0. I have started to learn As3.But I need to do this in very quick time.I dont know what is the starting point for acheiving this.
View 2 RepliesI want a scene to play for 10 seconds before playing the next scene and have no idea how to do this using script (action script 2). I know I can just extend the timeline out so it takes 10 seconds for the scene to play through, but I'd prefer to do it with script.
View 5 RepliesI have a video file which plays fine but it plays as soon as the welcome page starts. I have some small text animation which needs to play first and after 45 Seconds my video should start playing automatically. How to achieve this? Using actionscript 3.
View 1 RepliesI want to know how to play a mp3 sound every 2 seconds.
View 1 RepliesI have a movie which plays for several seconds, then I stop it. I want to resume it playing automatically after 10 secs.
View 3 RepliesCan some only indicate a small piece of FLEX/AS code which plays mp3 and with play button only,the objective is to play a sample sound for around 5 to 10 seconds.And the compiled swf should have the mp3 embeded in it
View 1 Repliesi'm using loadSound() to play a mp3 file, but after couple of seconds of playing, it restart to from start and then play normally... when a file already play at least once, everything going as normal.
song1= new Sound();
song1.onSoundComplete = function(){
song1.start(0,1);
};
song1.loadSound("mp3/"+curMP3,true);
you can hear it online here: domusventures.com/furnitures
I'm trying to build a play back progress bar for an audio recorded from the users microphone. It works okay but when I play back I can't figure out how long the audio is so I can calculate percent played for animating a progress bar. Most of these snippets can be found in LiveDocs and online examples from bytearray.org. Audio is stored in the bytearray and the sound is played back in a sound channel.
[Code]...
I'm making music visualization in papervision3d using FlashDevelop. The script generates 150 cubes each acting as different tone (from basses with red colors to high notes with blue).The song starts, everything works fine, but after 44 seconds song stops. I hadn't wrote function that would do that. I've turned off every useless visual functions and even papervision3d rendering. The scene is just black and the song still stops playing after 44 seconds.File is included with:
Code:
[Embed(source = "../assets/8bp069-05-she-session.mp3")]
because I'm not writing it in flash.
I've tried different song and it stops after 1:10...Flash uses ~30MB of Ram and 50% of my Athlonx2 64 2.6Ghz in action.
Here's some code: sound
Code:
[Embed(source = "../assets/8bp069-03-she-pioneer.mp3")]
private var Music:Class;
private var sp:Sound = new Music();[code].........
those last 3 functions have nothing to do with playback.Am I doing something wrong with computeSpectrum function? Here's the scrieennie of it in action: Of course it's like an alpha version of what I'm planning to do.
I am trying to embed some sound controls, and have hit a dead end. I made my play and stop buttons, imported my mp3,, assigned it proper linkage, and inserted this AS2 :
[Code]...
The buttons are named "play_btn" and "stop_btn" respectively. When I export it or preview it, hitting the play button does not do anything.... I hear no sound. What could be up with this?
I created a swf which loads multiple external swfs to 100% before playing. Which works fine. If I stop a clip while it's loading, I call loader.close() and I'm able to resume from where I left off at a later time. The problem I'm having is when I added the functionality to load the next clip while the current clip is playing. To be clear, I'll refer to the normal preloader as preloader, and the preloader which loads the next clip as pre-preloader. If the pre-preloader loads to 100%, everything is good. The next clip will play immediately without having to wait. If, however, the pre-preloader for the next clip is stopped at any point before 100%, the preloader will start loading at 0%.
With that being said, If I go back to the previous clip (which was previously already playing), the pre-preloader will pick back up where it left off, then if I go forward again, the preloader will pick up where IT left off.
[Code]...
I'm trying to get a movie clip to automatically load up another external clip, after playing an embedded flv.
This is what I've tried so far:
var holdFrame = setInterval( holdFrame, 5000);
gotoAndPlay(
_root.mc_holder.loadMovie("swf/library.swf"));
clearInterval (holdFrame);
Although it throws no errors, the setInterval is ignored and it just loads direct into the next mc clip.
Using Flash CS3 and as2.
I'm trying to get my movie clip to appear after 1 second then disappear after five seconds.
In it's class action script file I have this code which should remove the clip 5 seconds after it loads:
class monktainer extends MovieClip
{
function destroy()
{
[Code].....