I have a map, which dots for locations, and a list on the right of place names. I want to rollover, say, Paris and the dot over central/northern France glows (expands, flashes, something... I know that would be in the movie over France).
So my question is, if the buttons on the right are the parts that mouseover (and will change colour, like good web links should) how do I get the dots on the map to change when the name is rolled over?
I need to create a flash banner that has an animated Northern lights or aurora borealis. Does anyone know how to make this kinda thing? Are there tutorials for something like this? I would assume that this would entail creating fractals.
View 1 RepliesI am creating traffic lights, but I'm new to flash. I have a timer that ticks 6 times. However, I want to make the timer refresh after 6, and on each tick, a different traffic light shows.So far I have this:
var myTimer:Timer = new Timer(2000,6);
var counter:Number = 0;
myTimer.start();
[code]....
I am making a website for myself and I want to make something like:That the carlights are blinking with the rhythm of the music from my flashmusicplayer. [URL]
View 1 RepliesI am creating traffic lights. I have a timer that ticks 6 times. However, I want to make the timer refresh after 6, and on each tick, a different traffic light shows. So far I have this:
[Code]...
What is correct way of creating a police car with flashing blue lights drive along in a scene?My plan was to create a new file, add car and png of just the lights to the library.layer 1 rename as car and dragdrop car graphic to stage, add keyframe at fr48 for 24fps scene, 2secs duration insert a layer call it lights and drag drop to stage, make duration 24frames, lights flash at 1 sec intervals when movie played.Should I select both layers and go modify>convert to symbol>movieclip then copy paste that from library to the library of the scene with the road ?(it doesnt flash !)How is this done ?
I also presume the fps of the movie clip if taken to another file should be the same as that file, one cannot have movie clips of different fps in one file, am I right ?
I am looking to create an effect this this: [URL] Or even were the lines come in as a group or lines do a moment and move off the stage again. Been trying to mask it but the problem is that the line vectors have no inside too them, just a pure line.
View 1 RepliesI am trying to create a flash wich will have multiple dots to indicate locations, on mouseover to these dots a panel will appear on the right hand side showing some related information.
View 1 Replieswe have a bar stretching across the whole top of the screen with the following code:
Code:
import flash.display.Sprite;
import flash.display.StageAlign;
import flash.display.StageScaleMode;
[code]....
Then, lets say we have text inside of this movieclip on the right and left sides... How do you anchor this text to each side without it scaling?
Let's say we have a bar stretching across the whole top of the screen with the following code:
[Code]....
Then, lets say we have text inside of this movieclip on the right and left sides... How do you anchor this text to each side without it scaling?
I have many base images that I need to combine to construct larger images to draw on Sprite objects. I understand that the beginBitmapFill() method of the Graphics class renders a bitmap on a Sprite's graphics object. So I figure that I need to manipulate the BitmapData object, adding the base images to produce a composite image that I can then draw on my Sprite.
My question is: Is there any clean and relatively hassle free way of doing this? Is there a way to draw Bitmaps to certain locations in a Sprites graphics context? Could you copy a Graphics object onto another at certain coordinates and build it that way?
I'm trying to generate multiple stars in the stage, but I keep getting an action script error.
stop();
var i;
var arrayStars:Array;
for(i=0; i<70; i++) {
[Code].....
I am trying to make a light comparison chart where the lights can be turned on inividually by the user and one can be compared to another depending on which of the 6 lights you want to view.So far i have managed to make this work with 5 lights over 33 layers and diffferent buttons and different handlers for each of the buttons on each layer but as soon as the 4 and 5 light come into play everything slows down struggles and sometimes gives up.Is there a simple way of doing this which i am unaware of.I am currently using the gotoandstop comand to go to a specific frame based on the button press.
View 8 Repliesi wnat to show the message "Hi how are u" as a rollover message or a tooltip when i rollover the hyperlink Know More
View 1 RepliesFlash cross-domain policy files only allow you to specify allow-domain-from tags.I'd like to know if there is a way to limit access as if the tag read allow-domain-to. In other words:[URL]...
Is it possible to achieve this without resorting to creating a special sub domain for flash callbacks?
I typed out a function in an attempt to make two MovieClips appear on the stage in random locations onClick but I think I either forgot to add something or forgot to take something out.
[Code]....
Okay, now things are getting a little complicated. I need to build a Flash object that can sit over the corner of an image to serve extra content. It's way beyond my Flash skill level, my work is usually limited to print work in Photoshop and Illustrator so please excuse me if any of the following isn't clear. I am trying to learn though, So this is how it's all supposed to work, along with my issues; When the image & Flash item load a small looping animation will play to draw the eye/show the item as interactive.
When the user rolls over this the corner will peelback. I have a working peelback animation for the rollover, that reacts to mouse over/mouse off, and a looping animation for the initial, but I cannot work out how to make the initial loop until mouseover, then play the peelback when the mouse is over. And go back to the initial animation loop if the user rolls off. (Each of these animations is stored as a movie clip in the Library)
Then it gets more complicated... if the user stays on the corner until it is fully peeled back I need to make a small countdown (sort of a 3, 2, 1 situation) show, before launching a lightbox (would this have to be jQuery, or could it be done in Flash?) in the browser to serve the content.
[Code]...
how to zoom into(hence zooming the map outward) set locations on a map, yet only those locations. I have a script which will zoom to your mouse location and also if I set the specific x and y, but still zooms when clicking on any other spot.
how do I zoom to only a set location and nothing else within a map/image.
I'm doing a project in flash. What I'm trying to do is have an interactive map and have key locations you can click to view a popup and using xml call in data such as thumbnails, images and information. I've also created a scroller so when you click the arrows the map scrolls left to right except I want to make it so that when you click the arrow right for example when the map gets to the far right edge the arrow greys out (to signify that you can no longer move to the right) It's complicated to explain so here's the assets in a zip file: [URL]
View 3 RepliesI am getting ready to start a new project that about club located all over the world. I would like to make a map that locations pop-up on dynamically, like on
View 8 Repliesthere are two icons that become visible when a mc is selected, a small crosshair and a small circle. Sometimes they're in the same place, sometimes not. I understand the small crosshair is the origin, where all transforms originate from, but what's the circle, and what does it mean when the two icons are in different locations?
View 2 RepliesI want to make such flash file, which would contact web content without asking an user to add the file in the allow list on adobe web-page, is it possible to make it without help of other programing languages?
View 4 Replies I made a flash-file that will load a file externaly (http://.../locus.f4v). When I publish that flash file it renders a locus.swf, locus.index and a SkinOverAllNoFullNoCaption.swf (skin).When I upload everything works fine. But to easily manage all of my video's I can't have them lying arround and would like them in a folder. So I create a folder locusvideos. I change all the links in the html-file to locusvideos/... .swf but it just shows an empty page.so where are all the files at? locus.html (is in the most top folder)
/locusvideos/locus.swf
/locusvideos/SkinOverAllNoFullNoCaption.swf
and the video-file is still on the same place.
I need pointing in the right direction with a random question.I need to change my Flash player to take on adverts at the beginning or end of playing the desired video.Is there anyway to do this by supplying the player with 2 separate videos?For example, at the moment I use this within my player:
<script type="text/javascript"> var s1 = new SWFObject( "/flash/FLVClipEditor.swf?" + new Date().
getTime(),
[code].......
I want to set different locations in an Image, and when I mouse over the location it needs to shows something('box' or 'x' nd 'y' position of the location). How can i achieve this.?
View 3 RepliesHere is the code:
var abutton:AButton = new AButton; //Where AButton is a button defined in my library
addChildAt(abutton, numChildren);
abutton.addEventListener(MouseEvent.CLICK, attack);
It doesn't want to work when certain movie clips are underneath it, but I don't want to make it more complicated by switching to another screen. Is it possible to make the button work with movieclips underneath?
I am making a small game, and I have four movieclips and four fixed locations (fixed xy locations like x=86 and y=181).After every round of the game I want the movieclips to be randomly in one of the four locations.However my Actionscripting skills don't have a clue how I could do this efficiently.
View 5 RepliesI'm trying to take a 'snapshot' of a movieclip that i've got on the stage with "BitmapData" and then starting a "draw()" command on it. I'm able to get it drawing.. however.. it only takes the things from (0,0).( the upper left corner of the movieclip. Doing a trace on "BitmapData.rectangle" gives me it's X and Y coordinates .. and it's width and height..
How do I change the X and Y locations of the BitmapData for it to start the drawing from? As I have some stuff on the negative side of x.
I am working to tween a map of US States to center over and zoom on a specific state once clicked on.I know that I'd want the new x,y of the US States to be something in regards to the difference between its registration location and that of the child clicked uponThe tricky part I am finding is that the coordinate space of the children is specific to that of the container (parent)
View 2 RepliesTrying to output to multiple servers - tried launching multiple window of FMLE-but get an error message with the second broadcast attempt.
View 1 Replies