I was wondering if somebody could point me in the right direction to be able to load in a random sound clip (from a set of 5 or more mp3s) when the user rolls over a button. I can't seem to find a way to do this.
View 14 Replies
My project has about 30 movie clips in the library. With an action that comes up every few seconds, I'd like to randomly load one of those 30 clips onto the stage and have it play until it's done.
BUT - once a movie clip is already out, I don't want it to reset or come out again. I'd like the next action to randomly call out one of the remaining 29 clips.
Once each movie clip is done, I need some action to make it go back to the "available" list so that it can be called out again.
I'm guessing that I need to use attachMovie to call out the movie clips, and an array (maybe two) to make sure that I only get one instance of each movie clip. But after lots of searching and various dead ends, I'm just not finding exactly what is needed.
(****another title for this could be "how to create a MovieClip variable")
basically, im trying to load random movie clips from the library when i run the function "TRO1".. the logic behind what im trying to do is to to first create an array containing the class names (name given in the "linkage" option) of the movie clips in the library... then randomly select an item from that array... then bring it to the stage.. Here is the code I typed:
var characterArray:Array = ["truck", "car", "boat", "train", "helicopter"]
function TRO1(event:Event):void
{
[Code].....
When i try to run the function, i get the error message "Instantiation attempted on a non-constructor..."
I think the problem is that flash doesn't understand what "randomCharacter" is in the line "var character:MovieClip = new randomCharacter();"... I assume there is a proper way of writing the "randomCharacter" variable so that i can use it in the succeeding line...
code of loading random movie clips for example fac1_mc,fac2_mc,fac3_mc and etc, i want them to display random on my screen with tween transition i'm gna post the fla so you can see what i want to do, or the other way is to make more external swf's with picture animated and load them random with a 10sec between them. here is the link to my .fla with movieclips animated, and dunno how to make them to display random and animated
[Code]....
I'm trying to load sound dynamically into a clip and then play it randomly. The AS I came up with works great if the sound is embedded and I use the .attachSound() method instead of loadSound(). Now, when I load it dynamically and use the code below, the sound plays very fast and at a higher pitch.
Code:
var crows = new Sound(this);
crows.loadSound("Raven.mp3", false);
crows.setVolume(100);
[Code].....
I have 5 boxes on the stage as movie clips, each one with the same animation waiting to be targeted. What I need is a random script that will make them play in "random" order. This should occur after a few seconds of inactivity where they each play, but once there's mouse movement, whichever ones did animate should "reset" or play back to their original positions, (assuming there's more boxes and there's movement before all of them play). I have some code in there for arrays and some random script that isn't working right now. I just need the random setup, really. I may be able to figure out the time delay, (maybe), and then be able to tweak the rest of it for how I need. Right now, I've just simplified everything in a 5 box example hoping someone might be able to work with what I have.
View 6 Replieswhy is this code NOT loading a random image, despite tracing random number?
package {
import flash.display.Loader;
import flash.display.Sprite;
import flash.events.*;
import flash.net.URLRequest;
import flash.display.MovieClip;
[Code]...
im playing with the load random movie (but loading a random xml file instead) based on the wonderful tutorial from front page and was wondering whether anyone can show me the work around/upgrade to AS2 for this bit of script since im publishing to Flash 8 /AS2 and it doesnt work:
[Code]....
I am now using the code for my background image which will rotate when you enter a new gallery.I can't get it to randomize.[code]I have tried adding: Math.floor(Math.random() * total); and it almost works. It seems everytime the last node is called it stops working (also at other random times, haven't found a pattern).
View 1 RepliesI have a flash header that was never completed because the guy I hired took people's money and ran. So now I even wonder if what he said could work with my flash header is true or not. But, usually there is always a way to make it work.
I have a flash header that does two important things: 1) Upon entering the site, it loads and plays an audio track 2) Makes an animal noise when you hover over each animal menu item. (not sure if I'm able to give a link to it or not on here. If I able to and someone would like to see it let me know)
I want to know if my flash header can support the following additional functionality/changes:
1) Currently, it loads everytime a page is selected. I only want it to load the one time of entering the site because the audio gets annoying. Set a cookie maybe?
2) But, I do not want to turn the audio off completely because I still want the hover over each menu item sound.
3) Have a link on it to allow them to select to turn on / off the sound completely. It currently has that, but only for the current page. Once you select another page, the audio is back to on.
4) Lastlly, is there a way for it to detect that someone doesn't support flash and to display an html version of it? And can flash create a html version from my fla file?
I don't know much about flash (but am learning) so I'm not sure if I'll be able to do this myself. However, I want to find out if my flash header will even work this way before I invest the time learning it just for these changes. I know it will be pretty deep with script code, but I'm hoping I could find base code already available for these features. Not sure I can afford help now because of being laid off and two different scammers taking advantage of me. So I'm going to try to do myself and see if there is any suggestions/support on here that can help. I have Flash CS4.
I have a flash header that was never completed because the guy I hired took people's money and ran. So now I even wonder if what he said could work with my flash header is true or not. But, usually there is always a way to make it work.I have a flash header that does two important things: 1) Upon entering the site, it loads and plays an audio track 2) Makes an animal noise when you hover over each animal menu item. I want to know if my flash header can support the following additional functionality/changes:
1) Currently, it loads everytime a page is selected. I only want it to load the one time of entering the site because the audio gets annoying. Set a cookie maybe?
2) But, I do not want to turn the audio off completely because I still want the hover over each menu item sound.
3) Have a link on it to allow them to select to turn on / off the sound completely. It currently has that, but only for the current page. Once you select another page, the audio is back to on.
4) Lastlly, is there a way for it to detect that someone doesn't support flash and to display an html version of it? And can flash create a html version from my fla file?
I don't know much about flash (but am learning) so I'm not sure if I'll be able to do this myself. However, I want to find out if my flash header will even work this way before I invest the time learning it just for these changes. I know it will be pretty deep with script code, but I'm hoping I could find base code already available for these features. Not sure I can afford help now because of being laid off and two different scammers taking advantage of me. So I'm going to try to do myself and see if there is any suggestions/support on here that can help. I have Flash CS4.
I have a flash header that was never completed because the guy I hired took people's money and ran. So now I even wonder if what he said could work with my flash header is true or not. But, usually there is always a way to make it work.I have a flash header that does two important things: 1) Upon entering the site, it loads and plays an audio track 2) Makes an animal noise when you hover over each animal menu item. (not sure if I'm able to give a link to it or not on here. If I able to and someone would like to see it let me know)I want to know if my flash header can support the following addionalunctionality/changes:1) Currently, it loads everytime a page is selected. I only want it to load the one time of entering the site because the audio gets annoying. Set a cookie maybe?2) But, I do not want to turn the audio off completely because I still want the hover over each menu item sound.
3) Have a link on it to allow them to select to turn on / off the sound completely. It currently has that, but only for the current page. Once you select another page, the audio is back to on.4) Lastlly, is there a way for it to detect that someone doesn't support flash and to display an html version of it? And can flash create a html version from my fla file?I don't know much about flash (but am learning) so I'm not sure if I'll be able to do this myself. However, I want to find out if my flash header will even work this way before I invest the time learning it just for these changes. I know it will be pretty deep with script code, but I'm hoping I could find base code already available for these features.
So you roll into site and one of two movie clips play. How do I get flash to at random pick one of these two clips.
View 2 RepliesWhen loading a MP3 to a flash.media.Sound object the id3 property gives an error:
SecurityError: Error #2000: No active security context.
Offcourse, like many errors in Flex, the Flex documentation doesn't mention a thing about this, except that it exists...
The MP3 is valid (i've checked it with MediaPlayer and iTunes), the Sound object is in a good state (bytesTotal and bytesLoaded both reflect the correct amount of bytes).
I'm trying to make it so that when the main page loads, I have two movieclips, the name of the client's company and their slogan.
The movie clips fade in and out, but I can't get them to appear at different places on the stage.
For example, the page loads, then "Hughes Team Racing" fades in then out in nice fancy font on the right of the stage, how do I make it so that the next time it fades in and out its at a different place?
I have three movie clips on my stage. Their names in my library are a1_mc, a1_mc2, and a1_mc3. Each of those movie clips on my stage has a different instance name. All of these are connected with an actionscript in the same file.Now, I'd like the movie clips to appear at a random position every time, they are loaded.
I already tried to make a new array and solve this issue with the sort() command. However, that did not work out properly. The positions and instance names of the movie clips on my stage are as follows:
a1_mc
instance name on stage: a1
position on stage: X = 20.0 | Y = 140.0
[code]....
I am trying to place 6 movie clips in an array and access them in a random manner so that when a button is pressed a movieclip appears and plays randomly. All MCs are in frame one along with this code:
stop();blk1._visible=false;blk2._visible=false;blk3._visible=false;ppk1._visible=false;ppk2._visible=false;ppk3._visible=false;
storeCartons = new Array();storeCartons = (blk1, blk2, blk3, ppk1, ppk2, ppk3);
[Code].....
I'm trying to display random movie clips within the library (See attached fla)
each movie clip needs to display (fade in/fade out) and then proceed to display another movie clip from the library
You'll see how i have tried to do this is by creating a random number
Code:
var myImageSequence = 6;
var RandomLogo = Math.floor(Math.random()*myImageSequence)+1;
gotoAndStop(RandomLogo);
this code works, as it always selects a random frame and plays the movie clip within but then stops.
I need to then select another mc after this animation has finished and so on within a loop
I have a number of movie clips on the stage, and I want them to have a rotation value of either -5 or 5. The rotation values have to be randomly generated.
View 2 RepliesI know that the site has a page on random movement. Also, is there a way to not have the movie clips pause?
View 2 RepliesThe idea is to load an undefined number (around 200) movieclips (filled with pictures) that are grouped by "family" (probably 30 groups). all this data being retrieved from a mysql database (via AMFPHP).ll of this brings up no problem of any sort.Problems come up in the second stage of the process :I want to place theses groups on the stage at a random position (easy) but I also want them not to overlap. I have tried to work something out with hitTest but I have miserably failed because whe I move one group out of collision, I have to check all of them again... and that brings flash into an almost endless loop that the previewer stops before it crashes my computer.
Of course, google has been (maybe I don't know the right vocabulary) and once again, kirupa is my last hope...For the structural aspect of this question, I have a main MC containing all groups (group0, group1, group2, ...) each group containing the pictures (pic0, pic1, pic2, ...). I also have room on my stage since the main container is draggable
I don't even know how to start with this. I have 15 movie clips on the stage, each with an animation within it, I need them to play at random, one after the other. Ideally, once there's mousemovement, everything should reset.I kind of understand the random function and how to generate numbers, and I know this will probably involve arrays, but I don't know how to put this together.
View 12 RepliesI just recently tried getting the hand of understanding AS3 from AS3. I am finding it a bit of a struggle to try and understand using random.math.I am trying to use random.math to make each movieclip play randomly and then stop. I tried looking for online tutorials but I only seem to get information of creating a random math number which I don't want.I am not sure I am meant to use a timer or to use random.math function. The idea is to have say 4 movieclips start an animation randomly so when the user looks at the screen, a different movieclip will play.For my button I have put this code for them (photo_mc is my button):
Code:
import fl.transitions.*;
import fl.transitions.easing.*;
[code].....
I have a 355 frame timeline with a sound-clip explaining there are two demonstrations, the first will follow automatically but if the user wants to see the second demo first then to click on the link. When the swf file runs, at frame 350 Demo1 (the first demo) starts automatically as expected. If the link is clicked, the main sound clip stops and the second demo starts but the sound clips for both demos play together.How can I ensure that only the relevant sound clip runs?[code]
View 7 RepliesHow can i call and instantiate soundclips in my library dynamically.[code]
View 1 Repliesboards and even newer to ActionScripting and FlashWhat I would like to do is play random movie clips on my main timeline. I've tried using the below code, but it does not work:
Code:
var movieList:Array = new Array(mc1, mc2);
var i:int = Math.round(Math.random() * movieList.length);
[code]....
making a simple animation with about 10 "coins" on screen. I have a movie clip that animates another movie clip flipping over. I want to pull a random movie clip from the library into the nested clip so that on each "flip" a random coin face comes up.I've put all the clip names into an array (coin1,coin2,coin3,etc.)I think it would be described as _root.coin_container.coin_animation.random_coin_hereThere will be 10 coin_container's on the main stage, with coin_animation nested inside. At the beginning of the animation a random movie clip from the array should be called into coin_animation, then coin_animation will run through a few frames, repeat, call another random movie clip and repeat.
View 2 RepliesI'm trying to generate multiple stars in the stage, but I keep getting an action script error.
stop();
var i;
var arrayStars:Array;
for(i=0; i<70; i++) {
[Code].....
What I would like to do is play random movie clips on my main timeline. I've tried using the below code, but it does not work:
[Code]...
I've got them on a layer named "BG" and each movie clip is in a key frame. The ActionScript is on a seperate layer named "AS".
How to add random movie clip onMouse Move to stage from many (lets say 50) different movie clips in library? If I wanted to add one movie clip to stage I would do liko so:
ActionScript Code:
stage.addEventListener(MouseEvent.MOUSE_MOVE, onMove);
function onMove(e:MouseEvent):void {
var mc:MovieClip = new Ball();
