The movie will not play the same after I embed it in a pdf. pretty sure all the right selections were made when exporting.
I have a stop in the first frame of the movie and a button to start the movie. But when the movie is opened in the pdf it has skipped that frame and it starts to play automatically.
I have imported a gif but it does not play correctly. It's only two frames. The first bmp associated with the gif in the library has both slides combined while the second bmp is correct.To show the issue I am having. Here is the 2frame gif playing correctly:[URL]Now here is a screen shot of my library:[URL] You can see how the highlights bmp is incorrect. When I play the gif in Firefox,IE, Ulead gif animator or anywhere else it is fine but in Flash it shows that first frame with the combined slides and then the 2nd slide correctly. It ruins the "dancing effect" I'm going for.
View 2 RepliesI have made a drag and drop quiz, which can allow one drag_mc to be dropped to one of three target_mc's. I would like it that when the drag_mc hits any one of the target_mc's that it goes to and plays the drag_mc's frame 2.
Here is my code so far
stop();
//Import tween classes
import mx.transitions.Tween;
import mx.transitions.easing.*;
[Code]....
I have a button that when clicked, it's supposed to play a sound. Now, the sound does play when it's clicked, but it seems to be offset (meaning, it starts a few seconds later in the sound). As a result, only half of the sound plays.I have two buttons that do this, and I'm not sure what caused them to do so.I've never had this problem before, so I'm clueless where to go to fix it. I tried verifying the integrity of the sound, and it's normal. When I check it's proporties from the library, and "Test" the sound, it plays just fine, with no offset or anything.Here is the code I have for the button that causes this behavior:
Code:
var soundEffect_Button = new SND_EFFECT();
soundEffect_Button_instance_manual.addEventListener(MouseEvent.MOUSE_DOWN,SndEffectDown);
//Make the callback[code].........
I am currently building a custom jPlayer instance for a streaming media file. Having modified a supplied demo, I am able to get the player working in all major browsers except IE.
I have checked the swf path many times, which is loading without fault. I think I am unable to get the trigger to load the file in IE, resulting in "Attempt to issue media playback commands, while no mediaurl is set. Use mediaurl() to set. Context play()".
I am using an event trigger CSC class to play the media "track" in my source code (not mediaurl directly).
Below I will demo the current code, however I feel it would be more beneficial if someone could construct some pseudo code for me outlining the exact requirements to get this to work, and also an explanation of the GUI button CSS handles, so that I can get these working properly too (I may need to modify the JS, which is currently the standard).
I am using IE8 32 w/ Flash 8 and jPlayer 2.1.0
I only need the following functions:
Play button (jp_play?) - this should trigger the stream and then enable multiple other classes (jp_volume, jp_playline, jp_stop etc)
Stop button (to replace play button) - should stop (not pause) the stream and disable previously enabled classes.
If it helps jp_pause gives me all the required functionality with regard to hiding elements, except the mediaurl is paused, I need it stopping.
Current code snippets:
// Instance jPlayer
my_jPlayer.jPlayer({
ready: function () {
[Code]...
I have a Flash movie embedded as shown below. In Firefox, the movie renders beautifully In IE7, the movie is scaled down, pixelated, and looks bad.There is no HTML aside from what you see here - no CSS or anything.
<html><body><object classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" width="600" height="500" codebase="http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab"> <param
[code].....
I'm using CS4 to export a basic flash movie with embed tags pre scripted. And the issue is that on some OS systems using Vista or Windows 7 and IE 8 as a primary browser, it appears that IE 8 is not displaying the flash banner completely.... its CROPPING it off... This is very strange because the banner works fine in FireFox, IE7,Opera,Chrome but not I.E.8 on some OS systems...
If you google "Flash not displaying correctly in IE 8" you'll get alot of people with the same issues but no real definate fix...
what i could try? Do i need different flash embed tags? Or is this a user issue?
Note the button at the top called portfolio, on mouseover this button should loop through the "mouseover" label section, and when the user takes the mouse off of it it should continue to play through what it has started, and stop at the begining of the mouseover labelhen the user clicks on the button it should play through the "trans" label (only once) and begin to loop at the label section "current" when the user goes to another section, for example, clicks another button besides portfolio, the animation should stop on the label "visited" my code for it to loop looks like this (on the invisible button over the movie clip)
on (rollOver) {
portfolioBtn_mc.gotoAndPlay("mouseover");
}
[code].......
The Flash movie runs correctly with the preloader when it is run inside Flash. When I upload to IE, the preloader doesn't run.
View 2 RepliesI have a splash page for a site I have built and it is 7 hexagons in a group like part of a bee hive.When I mouse over on it grows (tweens)and will ultimatley show some content when finally completed.on mouse out it shrinks back to normal size.what I want to achieve is that when mouse over the depth of that mc instance is on top and all the others a in the background.now for that part I can't seem to get right...
if I have mouse out from another of the 7 clips to mouse over another I want the mouse over tween of the new hex square to be on top and the mouse out tween of the prevous hex square to be below the new mc Instance that I have just mouse over and all the rest of the hex squares to be at a depth below the the hex square I have just mouse out from...This is the code I have on the buttons
on (press, rollOver, dragOver) {
this.swapDepths(100); // set this instance to top depth_root.x.swapDepths(50); // set mouse out instance below top[code]............
1. When I place all movie clips on the same main stage, the xml file can be read perfectly. BUT not reading properly inside nested movie clip. Is it possible to read XML object in nested movie clip in the first place???
2. Is it better to load xml document just once in main timeline, and then read the XML object from movieclips OR read the XML document for each movie clip? Which way is better???
[CODE].....
Note the button at the top called portfolio, on mouseover this button should loop through the "mouseover" label section, and when the user takes the mouse off of it it should continue to play through what it has started, and stop at the begining of the mouseover labelwhen the user clicks on the button it should play through the "trans" label (only once) and begin to loop at the label section "current" when the user goes to another section, for example, clicks another button besides portfolio, the animation should stop on the label "visited" my code for it to loop looks like this (on the invisible button over the movie clip)
on (rollOver) {
portfolioBtn_mc.gotoAndPlay("mouseover");
}
[code]....
I want a movie clip (let's call it homecontent_MC) with 100 frames play to frame 80 and stop.Then when someone clicks a button on the navigation bar (home, about, services, contact, etc...) homecontent_MC would then begin playing from it's position (frame 80) til it reaches 100, at which point it wouldn't be on screen, and the movie clip that corresponds to the navigation button press (say services_MC...) would start from frame 1 and continue til it stops at it's frame 80...
View 7 RepliesI have five different scenes all including three different buttons. When I test the buttons in "play scene" - all buttons sounds correctly in all scenes. But when I play movie, there is sound only with one button (the same button in every scene). I have looked for differences, but this button seem to have all the same parameters as the others.
View 10 RepliesI am creating a site, and it has a animation that it has to play before loading the next section. What I cant figure out is what function I need to create so that when a user clicks on the vision button it will play the frame after stop(); which will close that section, then have it load the frame for the section that the person clicked on. The only way I can think of doing this is creating 3 different close animations for the three sections. But I figure there has to be a way to have it play the one close animation and then goto the frame which is the portfolio section or vision section (depending on the button clicked).
View 1 RepliesI am creating a site, and it has a animation that it has to play before loading the next section. What I cant figure out is what function I need to create so that when a user clicks on the vision button it will play the frame after stop(); which will close that section, then have it load the frame for the section that the person clicked on. The only way I can think of doing this is creating 3 different close animations for the three sections. But I figure there has to be a way to have it play the one close animation and then goto the frame which is the portfolio section or vision section (depending on the button clicked).
View 1 Repliesim using this code for my movie to pause for a certain time and then it play every after 5 seconds
stop();
var nInterval = setInterval(Play, 5000);
function Play() { clearInterval(nInterval); gotoAndPlay(_currentframe+1);}
[code].....
I have a flash banner that includes a movie clip of the logo being animated. I want the logo animation to only run at the beginning of the main "movie". Currently I have to find the length of the entire movie (for ex. 500 frames) then put a key frame in at the 500th frame of the logo movie clip. I know there has to be a correct way to do this...Do I add a frame name at the end of the main timeline and somehow in AS in the logo movie clip say "when you reach X goToAndPlay(1);"?
View 1 Repliesi'm trying to play several movie clips, one after the other from one main movie clip.i've got 8 movie clips, "m1.swf", "m2.swf", etc. "m8.swf", and one main movie clip, "play.swf".i've tried using loadMovie, but it only plays the last movie clip. this is what i've got. in the main movie clip, i've put a play button, and the actionscript i have in the button is:
on(release)
{
this.loadMovie("m1.swf",play);
//this.unloadMovie("m1.swf");[code]....
is this wrong? how can i get this to work correctly.
I have my flash document set up in the following way: On the main timeline I have my buttons that I want to play movie clips embedded inside a movie clip on the main timeline.However, when I click each different button, the current movie clip stops playing and then the movie clip corresponding to the button plays.
I want them all to be able to play at once. So for example you push button 1 and the alien plays, but half way through you could click button 2 and the alien clip would keep playing, but also the helicopter clip would begin to play as well.Here is the code I have so far:
building_btn1.addEventListener(MouseEvent.CLICK, alien);
building_btn2.addEventListener(MouseEvent.CLICK, helicopter);
function helicopter(e:MouseEvent):void {[code]......
I'm trying to make a flash website that has clickable buttons that will play different movie clips. But I dont know how to make it to just play the movie clip with the button you click without playing all the movie clips on the main timeline.
View 1 Repliesgive me the actionscript for a bar that has a play and stop button to play and stop frames in a flash movie. i would be gratefull if you could as i am really stuck
View 2 Replieshow they make this reverse play animation...
the one that [URL] did on their previous site design...
I wouild like to Play a movie clip in a movie like once every 120 seconds. Are there actionscripts whichs does this? Using Flash MX....
View 3 RepliesI have a MC inside a button and I put in in the "Over" state how to make the MC play in reverse on mouseOut? Or is there a better or easier way of doing this?
View 1 RepliesI am new to Flash and want to create a movie that has the classic "Click to Play" over a thumbanil of frame from the movie.
View 3 RepliesI am pretty new to ActionScript 3 and Flash. I don't want my movie clip to play unless the person's mouse curser is on the movie clip for more than a second. If the person just runs their curser over the movie clips really quickly, then it should do nothing. It must be more than a second. How do I code that?
[Code]...
I work with 3d animation. Im have a problem with a personal website Im doing, I have a link in a button inside a flash movie to open a new window and play a youtube movie:
on (release) {
var jscommand:String = "window.open('http://www.youtube.com/v/b0L4XLODhAA&hl=en&fs=1&','win','height=344,width=4 25,toolbar=no,scrollbars=yes');"; getURL("javascript:" + jscommand + " void(0);");
}
This works fine in Firefox but in IE it doesnt work, I then change the /v/ in the youtube link with /p.swf?video_id= and now I have the window open showing the small youtube thumbnail of my video but once a click play, nothing happens, I check it and is not loading anything.
I want to play a movie (simple fade in text on top of a photo background) in a banner on my home page one time when the user first displays the home page. After that I'd like to have the end result of the movie (last frame) remain static for the remainder of the user's session, regardless of which pages they refresh. The only way I can see to do this within the web site configuration is to embed the swf on a main page, then display the contents of all the other pages in an iframe on that page. However, I would prefer not to rewrite the entire site to use iframes.
I looked briefly at using a flash shared object and checking a variable in the swf onLoad event. But (I think) that requires the movie to be loaded to read the variable and hence the banner wouldn't show the text in the first frame. I could then jump to the last frame but it seems the banner would "flash" (sorry for the pun) from having no text at the start of the movie to displaying the text at the end every time a page is refreshed.
I'm not sure if I can do what I want without using Action Script or if I need to control the whole process within the html on the page containing the embedded swf.
i have created a preloader and am wanting it to only play through twice and then stop so i can have it getURL to and load the rest of my site but it just repeats constantly.
Here's the FLA [URL]