Multiple Copies Of The Library Panel?
Nov 6, 2009
I've used the New Library panel to copy symbols from one Flash document to another & subsequently closed the extra Library panel. I did this twice for on different occasions.
My Library panel is usually docked & collapsed so ocassionally I use Crtl-L to expand it. Now, when I do that, the previous 2 extra Library panels also appear & I have 3 Library panels on the screen - 1 docked & 2 extra floating ones! How do I get rid of the other 2 for good?
View 2 Replies
Similar Posts:
Feb 11, 2011
I load images into my .xfl project and use them amond movie clips - everything is ok at beginning. But after a some moment (which is absolutely undefined) Flash Professional CS5 starts duplicating all of them at saving and new copies names with "Copy 1", "Copy 2" and so one, or just with blank string. Because Flash duplicates them EACH saving, so after a several savings Flash refuse to save at all (shows "Too big project ..." error).
View 7 Replies
Jan 18, 2011
I made a Post-It note movie clip that is draggable. I want to create a whole pad of notes, or at least simulate this. I thought the best way to do this would be to add another Post-It whenever the startDrag() is triggered.
I first tried creating the Post-It with symbols but didn't think I could dynamically create new ones this way. I then created a class and added it to the stage[code]...
View 4 Replies
Apr 17, 2011
I have multiple images in flash, all on the same frame. What actionscript do I need to use to be able to print just the one image and not everything on the screen? Also, is there a way to make multiple copies of the same image?[code]
View 2 Replies
Jun 11, 2006
i try to stream a sound i get this message on my output screen "SWF contains multiple copies of a sound item". The sound still plays, but some popping noises are added here and there throughout the recording
View 3 Replies
Mar 29, 2009
I currently have one movieclip in my library, but 4 instances of it on the stage. I was wondering what the best way to animate them so they can do things 'separately'- I'm not sure if Actionscript is the answer, but it's worth a try. I just don't want all of them to move when I move one of them (when I try to animate them inside their movieclip).Possible solutions: I already have one that isn't very... resource friendly. For every individual instance I can turn it into it's own Movieclip, so it isn't affected by the rest... but if I were to have many, many movieclips on the stage, that would quickly overflow my library. If that's the only way fine, but I'm sure there's a work around.
View 3 Replies
Jun 13, 2009
Is it possible to iterate through MV copies with the same instance name? It would be very useful for my project.
View 5 Replies
Mar 11, 2009
I wished to create multiple copies of a variable in a loop.such as:
var pots:String = thisString [i]
and then i wish to reference one of these loop generated variables.Now how would you set it up so you could have all those variables of "pots" had their own names so one could reference say: "pots1" "pots2" or "pots17" ? This kind of situation would bee seen in a situation where I would be bringing in many array values and assigning certain parts of them to the variables. such as array[i][name]
View 2 Replies
Aug 29, 2011
It's easy to share bitmap data between multiple Images: // target and source are instances of the mx.controls.Image class var content_copy:Bitmap = new Bitmap((source.content as Bitmap).bitmapData);target.load(content_copy);
But how to do the same thing for movie clips with vector grapics? The only way I've found is to load movie clip using byte data of another movie clip as the source.
target.load(source.content.loaderInfo.bytes); But it actually duplicates the content.
View 1 Replies
Mar 27, 2009
When you open the Library panel and then my a new library so like you have 2 on the screen now pretty helpful if you want to open an external and have your current project open and drag and drop right. But here is the part I don't understand you have your 2 panels open now and every time you open your Library panel 2 pop up instead of one. God forbid if you every opened like 4 or 5 of these free floating Library panels I already have 3 going and there up there. is there a way to have all your open your Library panel with out having multiple un-needed Library opening along with the one you want?
View 1 Replies
Aug 10, 2010
Is it possible to import an .swc in the library panel... What I mean by that is to use it as a kind of shared library with my movieclip inside. I can create a new class from it but I'm wondering if its possible just to drag and drop from the library panel the mc's in my swc.
View 6 Replies
Apr 6, 2011
I have a swc file, loaded in my components panel and dragged it to my library. It is a file which allows flash as3 to evaluate strings as numbers as such. My problem is when I import the file
import r1.deval.D; I get an error message "the class r1.deval.D must subclass flash.display.MovieClip since it is linked to a library clip of that type".
I've been sitting here for hours following the developers guide and numerous examples of how to do this yet have not found the correct process.
View 1 Replies
Mar 15, 2010
how can i call function inside movieclip in library panel it is not on time line
View 2 Replies
Jul 12, 2009
Creating a dynamic scroll panel using two objects from my library and accessing images from a folder using some basic XML. The ScrollPanel loads fine, the 6 instances of the empty movieclip holders load. The function that traces the instance of the movieClip names is working. My trouble is accessing the instances of the movies to load the loaders in order to view the jpgs called from the folder. I receive an "access of undefined property" message if I type thumbLoad0.addChild(pic1ldr); etc, which you will see at the very bottom.
[Code]...
View 1 Replies
Jun 13, 2010
I've been working on a Flash site on and off for some years now and despite the fact it's been near the finishing stage for some time, the biggest problem I've had has been my custom photo gallery. The concept is simple, a panel has a group of images loaded into it, and each one is resized to thumbnail size. On clicking one of the thumbnails, it enlarges or zooms itself to fill the panel. I've only recently managed to get one image to zoom in from the centre, stopping when it reaches a specific size, and therefore have left it working this way. What I want however, is for the images to be loaded in row formation, and on clicking each one, it "zooms in" from its position to fill the whole panel. Currently I have the thumbnail movieclip duplicated, with a different image loaded into each copy, on clicking one of the images, it zooms from the centre, although obviously, this is not what I want. I've attached my source and images in a file called GalleryProblem.zip.
View 3 Replies
Dec 7, 2011
I just downloaded Flash CS5 for mac which installed without any errors. However, when I first launched the software I am getting the following error: The following panel layout is missing or could not be read: /users/rob/Library/Application Support/Adobe/Flash CS5.5/en_US/Configuration/Workspace/Essentials.xml The application will not have a correct layout. load one from Windows ->Workspace Once past this message none of the panels load.
View 3 Replies
Mar 6, 2010
I have a map in a panel.When maximizing the panel,the map remain the smaller size.How to make the map growing synchronizely with the Panel? When maximizing the Panel,I added Resize Effects.How to apply Resize effects on the Map when the extent of the map changing? It seems to me that I should dispatch extentChange event when maximizing the panel.
View 1 Replies
Mar 24, 2011
I discovered this while doing some programmatic panel resizing:Components in a spark Panel will still be visible when their location is outside the physical Panel boundaries. This does not happen with the mx Panel.unning Flex 4.1 on Windows 7I tried putting mx and spark controls in the spark Panel, and they both appear outside of the boundaries. Note this doesn't happen with the mx Panel. What am I missing to make the spark behave like the mxSample Code:
<?xml version="1.0" encoding="utf-8"?>
<s:WindowedApplication xmlns:fx="http://ns.adobe.com/mxml/2009"
xmlns:s="library://ns.adobe.com/flex/spark"
[code].....
View 1 Replies
Nov 14, 2009
I want to create a panel docking to a pop up panel in my flex app, like Winamp's playlist window can dock to main window. but I didn't find any useful on docking in flex
I've traced the PopUpManager, but I didn't find any available interfaces or events about popup window's moving, I think it's design shouldn't be so bad.
View 2 Replies
Jun 26, 2009
Does anyone knows of a way to get the output panel in flash or the console panel in flex builder or flash builder, to format the "traces" with html or any thing else? for example:
trace( <b>brett</b> ); and to get that to appear in bold in the console window or the output window?
View 0 Replies
Jan 10, 2011
Well I'm having some interface issues and i can't figure out how to cope with them. Firstly my "output" section is highlighting in lightblue(like the black arrows showing), it affects my application which is kinda annoying. img257.imageshack.us/i/libd.jpg Second thing is how to make "library panel" come back to right top section(so right scroll is more on the center?
View 0 Replies
Aug 16, 2010
I have a movieclip wich has a simple movement of a simple shape. This movieclip is copied many times to create a graphical effect. As the number of copies, or the complexity of the movieclip increases, CPU usage goes up. As from 90 copies, when I keep moving the mouse over the swf movie in a circle, playback stops (hangs). When the mouse movement stops, the swf continues again at the right position, as if calculation has continued, but updating the display has not. Now this is a quadcore pc, and we're 2010. I can't believe or accept that 100 mc's is the maximum number of movieclips that can be rendered. The obvious question is what can be done to optimize CPU performance ?
I'm using AS3, flash player 9.
Movieclip is a simple rectangle shape which moves along 1 axis.
var myLinkage:Class = Class(getDefinitionByName(getQualifiedClassName(McToRepeat)));
var newMC:MovieClip = new myLinkage();
containerMC.addChild( newMC );
View 1 Replies
Sep 7, 2011
Am working on the flex application with print option.
I need to check the print count[code]...
I attained the print count but unfortunately I can't get the
no of copies during print. When the user increases the no of
copies i need increment the PrintCount.
View 1 Replies
Dec 20, 2009
I can run the same SF in two windows so that two copies of the same SWF are runiing at the same time.How can I run it in one window splitted into two halves vertically or horisontally?Is it possible to make a third SWF which would do that?
View 0 Replies
Sep 10, 2009
I know very basic AS and ran into a small problem. I have a movie clip that I would like to be duplicated when the user clicks on it and then they can drag and drop it anywhere while the original stays in its place. Right now I have that working, the user can drag as many copies as they want, however when you release the clip you are unable to drag it anymore. "x" is my movie clip.
[Code].....
View 6 Replies
Aug 13, 2009
I'm working on a particle emitter, and I want to be able to pass in custom sprites (one for smoke, one for fire, et cetera). They are instanced on in the library as separate classes, but I want to be able to call a function like, "ParticleEmitter.SetSprite(Smoke)", then have it start creating instances of the smoke class.
The problem is, I don't know how to pass in a class name as an argument or how to use it to create copies. Is there any way to do this, or would it be best if I just put all my different particles inside a MovieClip and set the frame for each one it created?
View 6 Replies
Nov 25, 2009
I did open 4 windows of the library. I can close these library windows one by one but when I chose to show my library again all 4 windows open. I tried to reset it with chosing my standard workspace but it still happens allways when I open my library window again again.
View 2 Replies
Jan 12, 2012
I have 3 different MovieClips inside my library,
I can put each one severally to the stage,
but I can't put all of them using for loop and addChild();
View 9 Replies
Jul 11, 2009
how can I share a libary over multiple swf's? Case: I made a few different swf's which all use one or two components, is it possible to create a shared libary, so that only one swf, the main swf, has to compile these components? Otherwise every swf is 20kb bigger than needed
View 1 Replies
Mar 10, 2008
I want to load multiple different movieclips from my library(mc1, mc2, mc3 etc.)with a loop and I can't seem to succeed with this..
each movieclip is unique and it would be a nightmare to code them.
View 7 Replies
