I'm working on integrating Omniture into an Actionscript 2 custom written video player.Omniture is not playing ball at all and their documentation for their Actionscript component is very poor, and they don't provide tech support for it.
View 1 RepliesI am creating a flash presentation for something that I'm doing at university on Friday, and the video is the only thing in the presentation that isn't working.The presentation I have some words, music and video and the words and music are playing fine (but the music and video are on the FLVPlayback thing so I think that's causing a problem, but I can't see how I can separate them) and the video comes into play.When I put the actionscript - stop() - at one bit of the presentation, nothing plays afterwards, and I'm wanting the whole thing to stop at the end of the music, and when a line of the presentation to come up (which is the last line) and then the video is just the one thing that is playing, along with this line which is stationary under the video.I've used Flash before, but not with sound or video as I had no call for it, but now I do its not working.
View 18 RepliesI have a flash app built in ActionScript 3 utilizing a document class. I have followed the documentation for implementing Omniture ActionSource tracking by adding the ActionSource component to my fla's library, and then importing it into the document class and running the configuration code. However, the app fails to compile because it cannot resolve the path to the component (com.omniture.ActionSource). My class path contains a com directory (package) where most of the classes I use in my projects reside.
View 1 RepliesOk, so in my AS3, I have the following code that loads in XML content to the SWF:
View 2 Repliesi wanna ask how do i make a ball bounce off something like a ball bouncing off a bumper in a pinball game? i've tried a lot of times but everytime the ball get stucked to the box and it doesn't move anymore...will be grateful if anyone noes the actionscript of it..
View 3 Repliesball collision inside another ball using gravity.I have one large circle in the middle of the stage (its radius is 150 pixels). I have another circle inside of that one (20 pixels radius), this is the smaller ball that I would like to have bounce around inside of the larger one with gravity. When the small ball hits the edge of the larger circle, I would like it bounce inwards to the center of the larger circle. It keeps doing this until it eventually stops in the center of the larger circle at the bottom.
View 1 RepliesI have a sound clip that I'm loading externally into my flash file. The code I'm using looks like this and is placed in the as layer on the first frame,
var mySound:Sound = new Sound();
var myChannel:SoundChannel = new SoundChannel();
var myTransform = new SoundTransform();
var lastPosition:Number = 0;
mySound.load(new URLRequest("introaudio.mp3"));
myChannel = mySound.play();
[Code]....
I am using AS2 in CS5.5.I am creating a project for a class that introduced me to adobe flash. The issue is I have gotten to a certain point about 15 scenes. During say the 15th scene scrolling through the timeline animations works fine, playing it on test scene works fine. When I go to play it on test movie it stops at a certain point. At first I thought it might have been a misplaced stop action but there is none to be found. The weird part is every other scene I create after that continues to freeze as well, the images are there, but the animations won't play. All my previous animations play before those with the issue, it's justThese new ones won't play for some reason in test movie, but work completely fine in test scene and the timeline.
View 4 RepliesI am loading an external SWF file into my main timeline. The external SWF file contains an FLV video. At a certain point in my main timeline, the SWF file loads and plays the video. Is there a way to say...
If the VIDEO (FLV) is done playing, gotoAndPlay(X)?
I was wondering, what was the best way to for actionscript 3.0 to detect cuepoints playing from a FLV movie that is playing from an FLV playback component?
View 1 RepliesI have some animation (programmatic, I'm NOT using keyframed animation in timeline), and some music I want to play in the background. Once the music file reaches the end (about 30 seconds long), I want to trigger the end of the animation functions.I figure I could either use an actionscript timer to trigger the end of the animation or a keyframe with actionscript that is placed on the timeline near the end of the song but these methods assume knowledge about the duration of the wave file. If I changed the framerate or updated the external wave file, these triggers would possibly no longer sync upIs there some sort of event listener or other detection method for an audio file to signal it has finished playing? Or maybe there is a way to get the duration of the audio file to use in the timer
View 3 RepliesI am creating a game that has 6 movieclips all on the main time line of the game. Each movie clip has three buttons that when clicked plays, pauses or stops a sound clip.When I press any of the sound clip play buttons that sound starts playing, the problem is when I click any of the other sound clip play buttons those sounds also start to play. Is there a way I can disable the other sound clip buttons while the current sound is playing then enable all of the buttons when the current sound has stopped.
This is the code that creates one of the sound objects
[Code]...
So I made a few buttons with sounds within them and when I publish it they work just fine. But what I want them to do is;
Say I click a Button.The sound starts playing.Then I click it again, before the sounds done playing.I want it to stop the playing sound and start playing the button I just clicked on, whether it be the same button, or a different one.Right now it just ends up sounds like an echo because it'll play it as many times as you click it.
The problem I have is I click the play button and start playing. Then I click next and when I click play for another song the songs overlap. How can I stop whatever song is playing and start playing the new one? Has to stop the prev song when I click play_brn.
[Code]...
I am trying to get a ball from left to right I click in 28 and insert keyframe then I right click and click on create motion tween nothing happens. When I do this same thing on the sample one with the car this is what I get. and when I do the ball one sample2 it don't have the blue bar.
View 9 RepliesI'm a AS3 noobie and have a simple question:Quote:var ball:MovieClip = new Ball();var inc:int = 0;stage.addEventListener(KeyboardEvent.KEY_DOWN, onKey, false, 0, false);
I am trying to throw a ball in an arc, either an arc going left or right.
Here is my code:
var gravity = 2;
this.velocity.y += gravity;
_angle = 5;
[Code].....
It doesn't really look like the ball is "arcing" at all, it seems to be more of a diagonal line?
I need to get my movie clip to move across the screen from (30,100) to (600,100). I have a ball moveclip which loops and looks like it is rotating, therefore I need to create the actionscript code to just move the ball from the points listed above and then it will look like its rolling.[code]But I am getting this error; Access of possibly undefined property x through a reference with static type Class.I have the movie clip named ball with a class of ball_mc and it is exported for actionscript, I dont understand what the error is trying to say?
View 3 Repliesok so i have a button that plays an animation for fire when held down. and when realsed goes to and stops and frame one. when it reaches the end of the time line it goes to and plays at frame 10 and goes back to the end of the timeline. I have a sound for the fire animation that plays for the effect. The problem is the sound keeps going untill its over even if the button isnt held down. and when the playhead reaches the end of the timeline it goes to and plays and frame 10 and it replays the sound. if i hold it down it will just keep playing the sound over and over from start to finish. what i want it to do it when i hold the button down i want it to play the sound and when released it stops the sound where ever it is at. I also dont the sound to play again if there is a sound already going to stop it from playing 20 sounds at one time it gets loud and you need asprin after about 5 seconds of that.
View 2 Replieshow to hit a brick more than once with my ball created, i just want it to happen to random bricks only.
here is the coding;
Code: Select allpackage {
import flash.display.*;
import flash.events.*;
[code]....
I have this code to make a ball bounce. it works fine, however, everything on the stage bounces. I only want the ball to bounce.
Here is my code
/* Actionscript 3.0 Bounce Effect. ball = movieclip instance name*/
var velocity = 0;
var gravity = 2;
var speed = 0.03;
var ground = 300;
Object(this).ball.addEventListener(Event.ENTER_FRAME, fl_bounce);
function fl_bounce(event:Event) {
[Code] .....
I'm trying to make it so that when the ball hits the wall, it bounces off of it.. this is my code
Actionscript Code:
var elastic:MovieClip = _root.createEmptyMovieClip("elastic", 1);var point1:MovieClip = _root.attachMovie("sling", "point1", 3, {_x:50, _y:200});var point2:MovieClip =
[code].....
I am trying to follow and create a tutorial which explains how to make a bouncing ball.I am really struggling with the Action Script 3.0 even though the teacher types it in.I am inserting the code so that you can view it.[code]
View 3 RepliesThe ball created below is drawn as a red ball I want also to write its name "red" and place it on the ball whatever the ball position on the stage is
[Code]...
I'm running a hitTestObject for when ball hits target1 - The working code works great below.
Is there a way to have the ball hit multiple targets? Instead of hitting just target1 can it return when it hits target1, target2, target3..etc.
[Code]...
Maths was never my strong point and I have been attempting to speed the ball up that I have in flash. The ball is dispatched like this;
[Code]...
It almost works, however the results are not consistent. Sometimes the ball gets faster, and sometimes it becomes extremely slow.
I'm pretty new to Flash and I've ran into a bit of an issue. I'm trying to convert a AS2.0 code into a AS3.0 code, more specifically I'm following this guide:
[Code]...
So I am trying to create a document class for my program, and I know all the code is correct because I already have the program working.I am currently trying to rebuild the program, and I simply copy and pasted all the working code into my new program.I have 2 document classes, and when I run the program i get an error, and I don't know how to fix it. It says "The class 'ball' must subclass 'flash.display.MovieClip' since it is linked to a library symbol of that type."I don't understand why it isn't working now, is there some setting that I need to turn on to get it to work? I do have the line of code: import flash.display.MovieClip;
View 3 RepliesI made this ball that spawns particles out of it. The particles are the same size as the ball, so they end up above the ball, therefore, I cannot pick it up! I heard something about getChildIndex(), but I wasn't able to solve the depth. How do I get the ball to be on top all the time?
View 1 Repliesi have just came across the tutorial with physics/bouncing ball - so far i have encountered no problems in understanding it, but just a question:how do i stop the ball bouncing? do i have to equal it to a certain value or just drop in another if/else statement, because now the ball seems to bounce forever, since it gets every time multpilicated by a negative number.
View 2 Replies