I am trying to get a ball from left to right I click in 28 and insert keyframe then I right click and click on create motion tween nothing happens. When I do this same thing on the sample one with the car this is what I get. and when I do the ball one sample2 it don't have the blue bar.
View 9 RepliesHow can I move a ball to the left once the left arrow is pressed, so the ball moves to the left side and should automatically return to the right once it reaches the end of the stage... And the same thing should be applied to the right arrow.
View 1 RepliesI've attached a file which makes a ball move to the left when pressing the right arrow key.[code]On a Key.RIGHT it goes through a for loop. Shifting the ball 200 times 1 pixel to the left. Every iteration it tests for a hit with coordinates 100/50 (indicated by the red crosshairs). If there's no hit it moves 1 pixel to the left. If there is a hit it stops moving (no ball._x--).Funny thing is: while it eventually finds a hit, it does a final For Loop. Even though it should find a hit during that last loop when the ball is passing the crosshairs, it doesn't and moves the ball a final time 200 times 1 pixel to the left. Ending up with below image.URL...Why doesn't it find a 'hit' for that final For Loop while it's clearly passing it?
View 5 RepliesI've just learned the basics of programmatic animation in Actionscript 3.0 but I can't seem to think of the right solution for this problem.Here is what I'm trying to do: A ball moves at a certain speed from the left of the screen to the right end. If there's a box in the way, it keeps bumping into it until the box breaks and it continues moving forward.The box will have a set weight that will control how much it slides when it is bumped by the ball. The ball will be pushed back a bit when it bumps the box.I have a very specific idea and all I need is a little help starting. How would you tackle this problem?
View 4 Repliesi wanna ask how do i make a ball bounce off something like a ball bouncing off a bumper in a pinball game? i've tried a lot of times but everytime the ball get stucked to the box and it doesn't move anymore...will be grateful if anyone noes the actionscript of it..
View 3 Repliesball collision inside another ball using gravity.I have one large circle in the middle of the stage (its radius is 150 pixels). I have another circle inside of that one (20 pixels radius), this is the smaller ball that I would like to have bounce around inside of the larger one with gravity. When the small ball hits the edge of the larger circle, I would like it bounce inwards to the center of the larger circle. It keeps doing this until it eventually stops in the center of the larger circle at the bottom.
View 1 Repliesi hav a left right moving thumbnail gallery from xml, i need that on the last image image come on focus from the left side so automatically the left button will be disable or opacity goes 0 anything and same thing from right side also.
View 14 RepliesI have a series of thumbnails that should scroll from left to right & right to left when you roll over the movie clip buttons on either side. IT was working in another flash movie, but I moved it to a different flash file and now it's not working. The hit buttons within the movie clip buttons have this action script:
[Code]....
looking to create an image/mc slider that moves form right to left via user clicks of a left and right button.I would assume I would create an array to hold a series of mc's in (my images) and then tell the left and right buttons CLICK events to move linearly through the array (displaying next in line and previous etc.
View 1 RepliesI've some components with dynamic heights. They have to be aligned with respect to the bottom of my canvas container, so I cannot set the same y for all components.
I could compute their heights and successively set the y but I was wondering if there was an easier way to do it.
I have an Image called "PanoramaImage" (which is very long in width). I want this image to move from right to left & from left to right automatically.
I am using flash as3. I am loading this image from the same folder where the .fla file exist. my image to move by using Up & Down arrow keys.
The following is the sample code i found on web.
var loader:Loader = new Loader();
loader.contentLoaderInfo.addEventListener(Event.CO MPLETE, completeHandler);
loader.load(new URLRequest("panorama.jpg"));
[Code]......
I have an Image called "PanoramaImage" (which is very long in width). I want this image to move from right to left & from left to right automatically.I am using flash as3. I am loading this image from the same folder where the .fla file exist. Right now I have the code which will help my image to move by using Up & Down arrow keys.The following is the sample code i found on web.
var loader:Loader = new Loader();
loader.contentLoaderInfo.addEventListener(Event.CO MPLETE, completeHandler);
loader.load(new URLRequest("panorama.jpg"));
var content_mc:Sprite = new Sprite();
[code]....
My vision is to have a colored square at the top of the site Im working on which should span across the entire browser window. I have created a square 1280 x 100 pixels in size and imported it to the stage, alignment is set to x=0, y=0 ad alignment. The scene is the same size as the square I 've imported. When I view my Flash creation its displayed 8 pixels from the top left corner of the browser window. The flash file only contains the square and nothing else. take a look at the 3 files I've attached: issue-scrreen1-3.jpg. The first 2 screens are my Flash, properties and library screen shots. The third screen shot is my browser window.
View 2 RepliesI have a movieclip with the instance name of top. I want the box to grow from right to left, not left to right. Here is my code:
[CODE]...
panning my content from left to right (with stop as intervals) then right to left (also with intervals)
1. I created an mc (name: "content")Notice in this mc, I layout 4 sets of text (like a page) from left to right
2. I created another mc (name: "pancontent_mc")
-I added a layer for "content" and created a motion tween for it to pan from left to right
-I created a mask layer on top of "content" that will show 1 set at a time
-I created an action layer that has total of 4 stops(); on each frame where the 4 sets of text will show directly under the mask.
3. maintimeline -There's only 1 layer. I placed an instance of buttons (left/right) and an instance of "pancontent_mc"
4. actions for right button, works fine and stops on each set of text.
on (release) {
this.pancontent.play();
}
5. actions for left button - none. I havent figured this out yet.
on (release) {
this.pancontent. - something like play previous frame until stop...
}
I'm a AS3 noobie and have a simple question:Quote:var ball:MovieClip = new Ball();var inc:int = 0;stage.addEventListener(KeyboardEvent.KEY_DOWN, onKey, false, 0, false);
I am trying to throw a ball in an arc, either an arc going left or right.
Here is my code:
var gravity = 2;
this.velocity.y += gravity;
_angle = 5;
[Code].....
It doesn't really look like the ball is "arcing" at all, it seems to be more of a diagonal line?
I need to get my movie clip to move across the screen from (30,100) to (600,100). I have a ball moveclip which loops and looks like it is rotating, therefore I need to create the actionscript code to just move the ball from the points listed above and then it will look like its rolling.[code]But I am getting this error; Access of possibly undefined property x through a reference with static type Class.I have the movie clip named ball with a class of ball_mc and it is exported for actionscript, I dont understand what the error is trying to say?
View 3 RepliesI'm working on integrating Omniture into an Actionscript 2 custom written video player.Omniture is not playing ball at all and their documentation for their Actionscript component is very poor, and they don't provide tech support for it.
View 1 Replieshow to hit a brick more than once with my ball created, i just want it to happen to random bricks only.
here is the coding;
Code: Select allpackage {
import flash.display.*;
import flash.events.*;
[code]....
I have this code to make a ball bounce. it works fine, however, everything on the stage bounces. I only want the ball to bounce.
Here is my code
/* Actionscript 3.0 Bounce Effect. ball = movieclip instance name*/
var velocity = 0;
var gravity = 2;
var speed = 0.03;
var ground = 300;
Object(this).ball.addEventListener(Event.ENTER_FRAME, fl_bounce);
function fl_bounce(event:Event) {
[Code] .....
I'm trying to make it so that when the ball hits the wall, it bounces off of it.. this is my code
Actionscript Code:
var elastic:MovieClip = _root.createEmptyMovieClip("elastic", 1);var point1:MovieClip = _root.attachMovie("sling", "point1", 3, {_x:50, _y:200});var point2:MovieClip =
[code].....
I am trying to follow and create a tutorial which explains how to make a bouncing ball.I am really struggling with the Action Script 3.0 even though the teacher types it in.I am inserting the code so that you can view it.[code]
View 3 RepliesThe ball created below is drawn as a red ball I want also to write its name "red" and place it on the ball whatever the ball position on the stage is
[Code]...
I'm running a hitTestObject for when ball hits target1 - The working code works great below.
Is there a way to have the ball hit multiple targets? Instead of hitting just target1 can it return when it hits target1, target2, target3..etc.
[Code]...
Maths was never my strong point and I have been attempting to speed the ball up that I have in flash. The ball is dispatched like this;
[Code]...
It almost works, however the results are not consistent. Sometimes the ball gets faster, and sometimes it becomes extremely slow.
I'm pretty new to Flash and I've ran into a bit of an issue. I'm trying to convert a AS2.0 code into a AS3.0 code, more specifically I'm following this guide:
[Code]...
So I am trying to create a document class for my program, and I know all the code is correct because I already have the program working.I am currently trying to rebuild the program, and I simply copy and pasted all the working code into my new program.I have 2 document classes, and when I run the program i get an error, and I don't know how to fix it. It says "The class 'ball' must subclass 'flash.display.MovieClip' since it is linked to a library symbol of that type."I don't understand why it isn't working now, is there some setting that I need to turn on to get it to work? I do have the line of code: import flash.display.MovieClip;
View 3 RepliesI made this ball that spawns particles out of it. The particles are the same size as the ball, so they end up above the ball, therefore, I cannot pick it up! I heard something about getChildIndex(), but I wasn't able to solve the depth. How do I get the ball to be on top all the time?
View 1 Repliesi have just came across the tutorial with physics/bouncing ball - so far i have encountered no problems in understanding it, but just a question:how do i stop the ball bouncing? do i have to equal it to a certain value or just drop in another if/else statement, because now the ball seems to bounce forever, since it gets every time multpilicated by a negative number.
View 2 Replies