The project i'm working on contains many flv's which are dynamically loaded into our custom media player, and then again loaded into our flex application. We are having an issue with these flv's. Well i should say some of them. Our problem is based on browsers. In IE everything runs fine. In firefox, some work, some dont. We run different courses though our application. In 1 loaded course, the flv's play perfectly fine. No loading issues or delaying or freezing. But on this one course all of the flv's contained within it will not load. Like i said before, when we test this on IE they work. Only firefox is causing the issue. I have researched this issue and have came up empty handed.
On the homepage [URL] I had a previously installed .swf that works fine on IE, Firefox etc...I added a new .swf "testimonials" on the page on right hand side but it will only work in IE?
I have a flash gallery I created using Flash CS4 and Actionscript 3. It plays perfectly in FireFox, but in IE and Safari it just shows me a blank space on the page where the gallery should be. As a test I uninstalled Flash Player, and FireFox and Safari showed me the message that a newer version of Flash was needed along with a link to get it, but IE showed nothing. Now that Flash is re-installed, only FireFox actually loads/plays the gallery. With IE it doesn' tmatter if I use the 32-bit or 64-bit, or if compatibility mode is on or off. I tried republishing with Flash 9 set instead of Flash 10, but that made no difference. It fails with the HTML file generated out of Flash, as well as the page I created in Dreamweaver and used the Insert Media command to insert the .swf:
So I haven't done much in flash in a while. However, I imported a new movie and then published the movie from flash and made an html page as well. For some reason I can not see the movie when I go to the page.
I have a movie clip that loads an embed sound file using actionscript. That works fine when the swf is executed on it's own. However when I load it from another swf (to level1) the swf loads and runs fine but the sound does not play. It's my understanding that the reference to the instance of the sound file is not properly resolved but I am not sure how to reference it in order to resolve.Here is the code.
sound_clip.swf I have a sound file that is exported to actionscript with "BG" as the identifier.In some frame in the movie I use the following code:
New to flash and building banner ads.My problem is that I have made a banner ad that works when I preview it but when I try sending it to someone else via email all that shows up are 5 white circles in the middle that rotate flashing.I thought it might have been something with the video so I tried sending the ad without the video and it still did the same thing.
I have a project where I use several SWFs and have the fonts outlines stored into a seperate SWF. Within the .fla file's I have checked the Import for runtime sharing with the various font definitions.In the library the linkage part shows for every font the Import: classnamTo get a correct idea how things look within the IDE, I've checked several character ranges within the font properties so the preview renders correctly.In Flash CS5 everything was working correctly; no font outline was included within the SWF. The size report also shows this.When I create the SWF with Flash CS5.5 font outlines of the selected ranges still get embedded into the SWF. The file size of the SWF is much larger and the font outline information shows up in the size report.
The player is meant to retrieve the mp3 file from the server through the path address that is stored in MySQL. It does this in Explorer but not in Firefox. By the way the swf file of the player and the database is stored on the same server so there should be no problem with that.
I have found a way to send a play(); command to my Flash movie in IE9 but I can't figure it out in Firefox9. Here is the code I am using that works in IE:
I know it is not right out of the box, but is there a hack anywhere that uses javascript, php, or even flash to play the MP4s if the html5 video tag isn't supported?
I have made a presentation with voice over, in which the images and audio files are loaded externelly from the folder where the swf was placed. the voice over files are in MP3 format, loaded with the script follows
mysound = new Sound(); mysound.loadSound("voice1.mp3"); mysound.start(0,0);
I have made a presentation with voice over, in which the images and audio files are loaded externelly from the folder where the swf was placed. the voice over files are in MP3 format, loaded with the script follows
mysound = new Sound(); mysound.loadSound("voice1.mp3"); mysound.start(0,0);
Through my website (easier, as i can detect the browser)
sending an email which will have a player to stream the audio
restrictions.
1. Firefox wont play MP3
2. Iphone/ipad wont play flash
3. Iphone/ipad wont play ogg
4. Emails have trouble with javascript -jplayer (potential of ending in the trash)
problem. if i send via an email, i cant detect the browser, so cant choose ogg, flash, etc.
Solutions - 1. Use HTML 5 and embed a player stream mp3... works in iphone, ie8, chrome....not in firefox (mp3 issue) and older ie browsers (html5 issue).
use jplayer.... i expect the email to dislike the javascript and throw into the trash, plus will firefox play the mp3 audio? use flash.... i expect iphone/ipad not to work, also will it play from an email?
Video broadcast using VLC to flv file. I am using the NetConnection, NetStream and Video to play it in a flash. In Chrome and IE everything works fine, but in Firefox and Opera NetStream often dispatch event NET_STATUS with info.code = NetStream.Buffer.Flush and NetStream.Play.Stop and video is a slowdown.
I want to play youtube videos and programmatically direct firefox's audio out to a particular sound card.
Playing raw data 'stdin' : Unsigned 8 bit, Rate 8000 Hz, Mono aplay: set_params:1059: Sample format non available Available formats:[code]....
The command-line suggests that it worked, but audio came out of hw:0,0 (the default).Do I need to make my own plugin? Or do I need to force alsa to take 44100Hz?I refuse to use pulse since the memory leak bug makes it crash often.
Trying to recode map program to utilise modest map rather than original hand made map routines. Finished up yesterday and had squashed bugs pretty much(annoying flicker issue but that didn't appear on another web browser I figure it's flash/browser related issue). Then I realised I need to try this in IE as well. And it doesn't work. Map loads up so modest map code is working. What is NOT working is everything else. It's supposed to track locations and draw arrows to their positions.
It doesn't go to where it's supposed to initially. No arrows are drawn. No control buttons from HTML side work. Nothing. Zip. I have suspicion it could be the ExternalInterface which works differently on firefox and IE. Could that be reason? If so how does one go detecting what browser I am using and how does one need to take that into account? Or is there something else that's different between IE and firefox I need to take into account?
IE itself only gives rather mystified error message. Message: Unspecified error(my translation since original is in Finnish) Line: 49 Column: 5 Code 0: [URL] Funny thing is both php file and output html file is 37 lines long...
Bug in Firefox if wmode is set to opaque or transparent.mouseUp is not triggered if mouseUp occurs offstage.I have slider code that should stopDrag on mouseUp, but if mouseUp occurs off stage, the slider stays connected to mouse on re-entry, even though the mouse is now up.Bug does not occur in other browsers, and does not occur if wmode is null.I have tried every variable and every fix I can think of, and can't resolve the issue.I have multiple versions now in AS2 and AS3 and I've followed every suggestion I've found online, including html/flash javascript. Nothing works yet.
I downloaded flash to my new computer and videos will work using IE but when I try with firefox it acts as if I don't have it installed (says "download flash here,etc. ) and videos wont play.
I have created a swf movie file that containes the movie playback panel & a f4v video & I have uploaded them to a subfolder on my server.The whole site has a secure connection (https), but the page that i will try to embed the movie will have a regualr connection (http).
The problem arises when i do embed this flash video in a HTML file. in IE & Chrome it works and looks great, But in firefox it doesnt. If i clear my cache (as if i were a new visitor to the site) and enter the page, the movie isn't displayed at all...is shows "done" in the browser loading bar.
After about a minute or so (which i assume is the amount of time it takes to load the full movie), i hit refresh, and the movie appears fully loaded.
The movie is currently embeded in my homepage (via Iframe - for site protocol reasons), and if it wont load immidiatly from the first time a user enters the site, many users will miss the video (and get a blank white box in the middle of the site).[URL]
I can not get my pages where I have swf files to open in firefox. I have several pages with sound also and they will not open. here is the code that I am using. I have probably 8 pages of flash and the rest of the pages are javascript and html.
works perfect on my macbook pro (safari, firefox, and opera) but when I view the site on Vmare Fusion Windows XP and use IE and FireFox the pages don't load... I don't know what to make of this. Has anyone hear or seen anything like this happen before? BTW the website was created in Adobe Flash CS4/ AS 3.0 and published using Flash Player 10.
Firefox throws the flash file out of it's container? The page behaves correctly in IE8 (32bit). I posted in DW forums who suggested it was a flash issue and not DW. [URL]
I just did two 100% Flash sites. I always size my sites 1024 by 768 or a bit smaller. I have never had a problem with it not fitting in the browser. I exported with Flash HTML at 100%, no scale.I tested these sites on Safari and IE on different monitor sizes. They looked great.
Both of my clients are using Firefox said it cuts the bottom off by about and inch or so. I did some research and this seems Firefox does this. I read this article below and wanted to know the following:[URL]
1 - Is this the best way to fix it? Or have I developed these sites too big for FF.
2 - Is there something else I could do (i.e. export the HTML a different way?).
3 - Should I size differently in the future?I would like to prevent me having to resize the stage and change all the objects.
I'm creating a video site using the flvPlayback component and telling it which video to play based on flashvars. So far everything is working well in all the browsers I've tried except Firefox on the PC. In FF/PC it hangs on the first frame of the video while showing the buffering indicator.
Please can someone help thsi old guy who needs to get flash working on his computer.I have Vista 64 bit and run Firefox as my browser.Should I uninstall Flash and try an older version - but which one?
I have built a Flash site and also set it up with alternate content so it can be viewed on iPhone and iPad as well as other mobile devices. It works great everywhere but in FireFox the site's swf loads on the page twice.Has anyone else experienced this issue and if so, what have you done to work around this FireFox bug?
Offline (on my drive) it works, but online (on my website) it loads the entire flv before displaying anything (..I get the animated barber shop sign scrub bar thing).Is there any additional coding or setup I need to do for it to allow me to play it even while it is downloading, as it's supposed to? I just spent a week trying to get my Quicktime .mov's to Fast Start, and it just isn't happening, despite everything I try.I had it work ONCE now using QT Pro, but now they aren't working again.
I gave up on QT, and am trying the FLV route using the FLV Player component... which looked promising, but is now giving me the same issue.Clip thumbnails (embedded movies) on my HTML page that don't download until you click play... and when you click play, it starts playing as soon as it has a good enough head start in the load.I've tried Fast Start QT's....as well as external FLVs loaded via a swf with a FLV Player component inside..
I am very new to Flash and actually our graphic designer created this small flash timeline here:[URL]..For some reason when I test it in Firefox the Close button and the links do not work. Also I know of one person who has the same issue in IE. Most others using IE have no problem what so ever. The actionscript for the close button is:
