Professional :: Have Something Start Later On Flash Timeline
Mar 17, 2010
I have a few problems with Adobe Flash. Please refer to this image: [URL]. First, I would like to make a movieclip begin somewhere else (so that I may jump to it later). But when I preview what I currently have in my timeline, my movie clip just flashes on and off with Layer 1 (the image on Layer 1 flashes too), rather than what should be a delay of nothing (but Layer 1 flashing) until frame 20 is reached, at which point the movie clip on Layer 3 should play. Secondly, I do not wish for the movie clip to stop at the end of the second keyframe (even though it's currently not really even playing). How can I have it play all the way out?
View 2 Replies
Similar Posts:
Aug 22, 2011
There must be an easier way to add frames at the start of a flash timeline?
I want to insert a few frames before frame one, but I can not find a simple way to do so in Flash CS5.
I have tried to use insert, it will place them to the right (frame2..). I have tried to drag all the frames of the movie over to the right, but it creates strange problems with the tweens (some even go away).
The only way I have found to do it, is create a new movie, insert frames, and then copy/paste the entire movie from the original flash in to this flash, is there a better way?
View 2 Replies
Aug 4, 2010
I want my object to animate using Motion Tween in Timeline. I did so. But it starts animating from Frame 1. Instead I would like it to start animating from Frame 25. I don't want anything to animate upto 24 Frames. How can I do that?
View 1 Replies
Oct 9, 2011
Ive installed my adobe cs5 master collection. and it run correctly. one day, i lost my motherboard and i replace it with the new one.after that, i still can access flash pro cs5 for one time. after restarting the windows, i can't open it anymore. just flash cs5 which i cant open. the other aobe programs still can run.
View 1 Replies
Oct 26, 2011
I purchased the CS5.5 Production Premium Suite.Eveything works fine except Flash CS 5.5. The icon has a white circle with a line through it and if I try to start it it says:You can't open the application Adobe Flash CS5.5.app" because it's not supported on this type of Mac.I have a Core i7 iMac with 8gb ram and a Radeon 5750 with 1gb of vram running 10.6.8.Can that not be enough to run Flash?
View 1 Replies
Dec 5, 2011
I don't know what happened but a few days a go when I tried running flash professional it wont start.
It shows the "Loading screen" when it's about to open the main windows it hangs. It shows the main windows all white. And mouse cursor is "processing", when I try to close windows says the program it's not responding.
I tried Unnistalling the flash profesisonal and installing it again but no changes.
View 1 Replies
Mar 9, 2012
Last time I worked with flash was January 23, 2012. It was working fine, but this morning I tried running the program and it won't start. Same with encore, it just doesn't start. Is this due to a windows update? Does anybody know of a workaround to this problem?
View 1 Replies
Feb 10, 2010
I'm having a problem with Flash crashing when I try to start it. I first noticed the problem when I had a fairly simple scrolling text fla that I tried to open but after a few seconds of the document being open spinning beach ball (Mac) would come up and a few seconds later that app crashes. I've tried to open three separate Flash documents as well as just opening the program and making a new document. Every time, the result being the spinning beach ball and the app crashes after about 5 seconds.I've updated all my Adobe software. What else can I try? Deleting preferences, if so,where are those located?
View 2 Replies
May 27, 2010
I've bought the new Adobe Web Premium CS5 and I have big problems with the Flash Professional CS5.
First time the application started correctly, but didn't start next time. I always had to remove all application settings in "Documents and Settings/user/Local Settings/Application Data/Flash CS5", what is already not very good.
View 13 Replies
Oct 3, 2010
i have flash cs3 when i click to start it a welcom screen come for a second and then disapper.i am not able to start flash
View 4 Replies
May 12, 2011
I'm having a problem with launching Flash CS5. I had previous been running Flash CS5 on my MacBook Pro, and everything was working fine for many months. Then I just recently installed OSX 10.6.3, and now Flash CS5 "unexpectedly quits" on launch. I've tried uninstalling Flash CS5 and then re-installing it with no difference.
[URL]
1. Delete preferences. I found the file "Flash CS5 Preferences", removed it from Library > Preferences folder, and put it in the trash. (I looked at this file: it is just a text file with XML, so I assume this is the right thing to remove).
2. Then I used Disk Utility to repair permissions. This appeared to go fine.3. Then I used FontNuke to first find font caches, and then removed them. This resulted in an automatic reboot of my system.Upon system restart, I tried opening Flash CS5 immediately. Although it crashed again, it actually got much further this time: the application launched, and I was able to see the IDE for a moment before the whole thing crashed again. This was a little different than the dozen or so times before that I had tried to debug this, where Flash would not even get past the launch screen (where it says it's loading fonts, initializing etc). Tho, when trying to launch Flash CS5 again, it now again crashes before it even gets out of the launch screen (every time).
I have a sense that this might have to do with a font issue. The reason is: after installing OSX 10.6.3, I noticed in some other applications, such as FireWorks CS3 and in Numbers, that some of the fonts were looking messed up (usually the kerning is way off one way or the other with files that I've never had a problem with this before). I was able to simply fix these issues in these other applications, yet is this font issue also affecting Flash CS5 in some way?Anyway, I've done everything I can think of multiple times over--and I still have no flash CS5!
View 1 Replies
Jun 9, 2011
My version of Flash CS5 has recently become very slow to start up, taking well over a minute sometimes.It appears to stall for the longest time during a loading process called "Loading Accelerators" (yes, very ironic).Mac Pro running Mac OSX 10.6.7 (Snow Leopard) and 14Gb RAM.
View 4 Replies
Oct 11, 2009
I'm using Flash CS4 and I have to trim a .fla file down. I can delete the end frames no problem, but the first 600 frames that I have to remove are proving to be a nightmare. When I use the select>right-click>delete method it doesn't remove these frames, instead it removes the corresponding amount of frames from the end.
View 2 Replies
May 13, 2009
I have used the actions panel to write a stop code on frame one of my timeline.When I test my movie it stays on the home page, which is good! I have also created an 'enter site' button on the home page. I want to click this button and have the timeline start rolling over to frame 50 (where my next label 'contents' will be). At frame 50 I want it to stop, and so on for all of my labels/pages. The action taking place on the timeline is a pan across a panoramic photograph, which will stop at different points.
View 7 Replies
Jan 9, 2010
Didn't know if I should be here or in the Dreamweaver forum. Just trying to figure out how to make a Flash swf. start only after all the other elements of the page have been downloaded. Is this something you would do in Flash through Publish Settings or would this be accomplished in Dreamweaver?
View 4 Replies
Mar 5, 2010
how to put mp3 which is just speaches done, be put alone in a flash file. Do i have to import sound? I wanted to be able to put 3 different mp3 files in flash and have people able to click on any sound and hear it. Be able to play and start and pause a sound. Is it possible are should I use something other than flash. Are should I convert to mp3 into another format and put in flash.
View 4 Replies
Nov 15, 2010
I am migrating from Flash MX to Flash CS 5. One of the most annoying things so far about the changes is that whenever I open a file - it opens a tab - How can I stop this? I was able to stop this in Photoshop CS but there does not seem to be that option in Flash CS
View 2 Replies
Dec 3, 2010
I created these buttons that should do the following screen. Be dark when the mouse is not over them. Smoothly transit to a brighter colour when the mouse get's over them and then again smoothly transit to dark when the mouse get's away. To do so I created 2 animations the one that gets the button darker and the one that gets the button brighter (which is actually the normal picture of the button). The button statuses are these:
UP: Bright to Dark animation
OVER: Dark to Bright animation
DOWN: Bright picture
HIT: Bright picture
now the buttons work perfectly except for the fact that when i turn on the scene before they get dark the buttons have to go through the up animation (bright to dark) so it looks like turning all the lights off. How do i have my buttons start off being dark?
View 7 Replies
Mar 11, 2011
I have a Flash animation that starts with an audio clip imported. When that's done it goes to a video. After that another audio clip plays, but I can't get it to start when it's supposed to. It keeps coming in too early even though its keyframe is after the movie ends. In fact I had to move the audio's keyframe about 1500 frames past where it should be to get it to come in at the right time. My Flash movie is 24 FPS. The .mov file being referenced in the FLVPlayback is 23.98 FPS. What's going on here?
View 7 Replies
Feb 5, 2011
I download Flash CS5 and I try to execute it without an error message coming in and basically the program does not start.The message goes as follows:
Flash.exe - Entry Point Not Found
The procedure entry point ?ik_treelsActive@CFlashIK@@QAE_NJ@Z could not be located in the dynamic link library FlashIK.dll.So then I tried to install the updates via the website and the AdobePatchInstaller.exe and I get this:
Some updates failed to install.
Update is not applicable.
So here I am unable to start Flash CS5. Anyone know a way to fix this issue?
View 1 Replies
Feb 17, 2009
I want to have an object start off with an alpha of 0 but then opacity in to 100% later on the timeline BUT I have to use Actionscript.
View 6 Replies
Jan 9, 2006
How can I use setInterval to start and stop the root timeline? I would like to use it in this little fade function wherein the setInterval would kick into effect once the alpha is 100%. You can see where I think it needs to go. Here's the code.
Code:
stop();
variable = x+5;
title_mc._alpha = 0;
function fade() {
var nFadeSpeed = 4;
[Code]...
View 6 Replies
May 24, 2003
I am a main timeline, with a movie clip that I want to loop infinitly, until a button is clicked, once the button is clicked I want it to stop the movie clip timeline, once the button is clicked again I want it to start the movie clip timeline again.
I am not the greatest actionscripter, I understand it I just have a bit of trouble writing the syntax myself.
View 5 Replies
Jun 14, 2010
I realize this is probably an old thread, but does anyone have an actionscript example of how to create a custom start and stop time for a Flash video? In other words I'd like to be able to "bracket" the play time of a Flash video with custom start and stop times rather than start at the beginning and end at the end.
View 1 Replies
Oct 15, 2010
I'm putting an swf on a website and it's working great except for IE. (Although it works great in IE 9). In some versions of IE it will start to play then stop as if the video was never load and in others it will just go white. It works great in other browsers, just our favorite browser IE seems to screw it up (big surprise).
View 2 Replies
Nov 20, 2010
I'm using a new Mac Pro with Snow Leopard. We have Adobe MC CS5.I'm experiencing serious problems with Flash CS5. The program locks up at "Initializing Tools" for several minutes at start up. Once the program opens it will crash if I try to create a blank document. Other Adobe programs work fine.Flash CS4 worked fine on this computer.Anyone have any ideas on how to fix this? I've tried uninstalling and deleting all adobe documents from the configuration folders. It just seems like this machine is cursed or something.
View 1 Replies
Nov 29, 2011
My animation contains a button which 'hovers' or 'lightly floats' on the stage. The object and motion tween creating the 'hover' is in a movieclip which I then applied to a button symbol. When I test my swf and scroll over the button, the motion tween within the button skips back to the beginning. Is there a way to get a smoother transition?
PS. I put the button into a movieclip with the a motion tween and it doesn't seem to work properly.
View 3 Replies
Jan 26, 2010
I have created a short animation in Flash CS4 which has one button with a URL link. the button shows up on frame 217, and on that frame I added the following action script:
[Code]...
however, the 'hit zone' for the button shows up from frame 1 of the animation. is there a way of getting the hit zone to start when the button shows up?
View 3 Replies
Apr 24, 2008
i'm looking for a script that tells the timeline to start to play frame 25, after 5 seconds.i've found a few codes online but cos they are for different purposes, i just cant seem to custom it to work accordingly.
View 5 Replies
Apr 26, 2011
I am in the learning process. Working with FlashCS5 and AS3. if the issue appears to be too simple for you. Placed a movieclip(mcassessJohn) on the main timeline and moved to the frame labelled "johnFeedback" in the movieclip timeline using the following actionscript code.
[Code]...
View 1 Replies
