Ive installed my adobe cs5 master collection. and it run correctly. one day, i lost my motherboard and i replace it with the new one.after that, i still can access flash pro cs5 for one time. after restarting the windows, i can't open it anymore. just flash cs5 which i cant open. the other aobe programs still can run.
View 1 Replies
I purchased the CS5.5 Production Premium Suite.Eveything works fine except Flash CS 5.5. The icon has a white circle with a line through it and if I try to start it it says:You can't open the application Adobe Flash CS5.5.app" because it's not supported on this type of Mac.I have a Core i7 iMac with 8gb ram and a Radeon 5750 with 1gb of vram running 10.6.8.Can that not be enough to run Flash?
View 1 RepliesI don't know what happened but a few days a go when I tried running flash professional it wont start.
It shows the "Loading screen" when it's about to open the main windows it hangs. It shows the main windows all white. And mouse cursor is "processing", when I try to close windows says the program it's not responding.
I tried Unnistalling the flash profesisonal and installing it again but no changes.
Last time I worked with flash was January 23, 2012. It was working fine, but this morning I tried running the program and it won't start. Same with encore, it just doesn't start. Is this due to a windows update? Does anybody know of a workaround to this problem?
View 1 RepliesI'm having a problem with Flash crashing when I try to start it. I first noticed the problem when I had a fairly simple scrolling text fla that I tried to open but after a few seconds of the document being open spinning beach ball (Mac) would come up and a few seconds later that app crashes. I've tried to open three separate Flash documents as well as just opening the program and making a new document. Every time, the result being the spinning beach ball and the app crashes after about 5 seconds.I've updated all my Adobe software. What else can I try? Deleting preferences, if so,where are those located?
View 2 RepliesI have a few problems with Adobe Flash. Please refer to this image: [URL]. First, I would like to make a movieclip begin somewhere else (so that I may jump to it later). But when I preview what I currently have in my timeline, my movie clip just flashes on and off with Layer 1 (the image on Layer 1 flashes too), rather than what should be a delay of nothing (but Layer 1 flashing) until frame 20 is reached, at which point the movie clip on Layer 3 should play. Secondly, I do not wish for the movie clip to stop at the end of the second keyframe (even though it's currently not really even playing). How can I have it play all the way out?
View 2 RepliesI've bought the new Adobe Web Premium CS5 and I have big problems with the Flash Professional CS5.
First time the application started correctly, but didn't start next time. I always had to remove all application settings in "Documents and Settings/user/Local Settings/Application Data/Flash CS5", what is already not very good.
i have flash cs3 when i click to start it a welcom screen come for a second and then disapper.i am not able to start flash
View 4 RepliesI'm having a problem with launching Flash CS5. I had previous been running Flash CS5 on my MacBook Pro, and everything was working fine for many months. Then I just recently installed OSX 10.6.3, and now Flash CS5 "unexpectedly quits" on launch. I've tried uninstalling Flash CS5 and then re-installing it with no difference.
[URL]
1. Delete preferences. I found the file "Flash CS5 Preferences", removed it from Library > Preferences folder, and put it in the trash. (I looked at this file: it is just a text file with XML, so I assume this is the right thing to remove).
2. Then I used Disk Utility to repair permissions. This appeared to go fine.3. Then I used FontNuke to first find font caches, and then removed them. This resulted in an automatic reboot of my system.Upon system restart, I tried opening Flash CS5 immediately. Although it crashed again, it actually got much further this time: the application launched, and I was able to see the IDE for a moment before the whole thing crashed again. This was a little different than the dozen or so times before that I had tried to debug this, where Flash would not even get past the launch screen (where it says it's loading fonts, initializing etc). Tho, when trying to launch Flash CS5 again, it now again crashes before it even gets out of the launch screen (every time).
I have a sense that this might have to do with a font issue. The reason is: after installing OSX 10.6.3, I noticed in some other applications, such as FireWorks CS3 and in Numbers, that some of the fonts were looking messed up (usually the kerning is way off one way or the other with files that I've never had a problem with this before). I was able to simply fix these issues in these other applications, yet is this font issue also affecting Flash CS5 in some way?Anyway, I've done everything I can think of multiple times over--and I still have no flash CS5!
My version of Flash CS5 has recently become very slow to start up, taking well over a minute sometimes.It appears to stall for the longest time during a loading process called "Loading Accelerators" (yes, very ironic).Mac Pro running Mac OSX 10.6.7 (Snow Leopard) and 14Gb RAM.
View 4 RepliesDidn't know if I should be here or in the Dreamweaver forum. Just trying to figure out how to make a Flash swf. start only after all the other elements of the page have been downloaded. Is this something you would do in Flash through Publish Settings or would this be accomplished in Dreamweaver?
View 4 Replieshow to put mp3 which is just speaches done, be put alone in a flash file. Do i have to import sound? I wanted to be able to put 3 different mp3 files in flash and have people able to click on any sound and hear it. Be able to play and start and pause a sound. Is it possible are should I use something other than flash. Are should I convert to mp3 into another format and put in flash.
View 4 RepliesI am migrating from Flash MX to Flash CS 5. One of the most annoying things so far about the changes is that whenever I open a file - it opens a tab - How can I stop this? I was able to stop this in Photoshop CS but there does not seem to be that option in Flash CS
View 2 RepliesI created these buttons that should do the following screen. Be dark when the mouse is not over them. Smoothly transit to a brighter colour when the mouse get's over them and then again smoothly transit to dark when the mouse get's away. To do so I created 2 animations the one that gets the button darker and the one that gets the button brighter (which is actually the normal picture of the button). The button statuses are these:
UP: Bright to Dark animation
OVER: Dark to Bright animation
DOWN: Bright picture
HIT: Bright picture
now the buttons work perfectly except for the fact that when i turn on the scene before they get dark the buttons have to go through the up animation (bright to dark) so it looks like turning all the lights off. How do i have my buttons start off being dark?
I have a Flash animation that starts with an audio clip imported. When that's done it goes to a video. After that another audio clip plays, but I can't get it to start when it's supposed to. It keeps coming in too early even though its keyframe is after the movie ends. In fact I had to move the audio's keyframe about 1500 frames past where it should be to get it to come in at the right time. My Flash movie is 24 FPS. The .mov file being referenced in the FLVPlayback is 23.98 FPS. What's going on here?
View 7 RepliesI download Flash CS5 and I try to execute it without an error message coming in and basically the program does not start.The message goes as follows:
Flash.exe - Entry Point Not Found
The procedure entry point ?ik_treelsActive@CFlashIK@@QAE_NJ@Z could not be located in the dynamic link library FlashIK.dll.So then I tried to install the updates via the website and the AdobePatchInstaller.exe and I get this:
Some updates failed to install.
Update is not applicable.
So here I am unable to start Flash CS5. Anyone know a way to fix this issue?
I realize this is probably an old thread, but does anyone have an actionscript example of how to create a custom start and stop time for a Flash video? In other words I'd like to be able to "bracket" the play time of a Flash video with custom start and stop times rather than start at the beginning and end at the end.
View 1 RepliesI'm putting an swf on a website and it's working great except for IE. (Although it works great in IE 9). In some versions of IE it will start to play then stop as if the video was never load and in others it will just go white. It works great in other browsers, just our favorite browser IE seems to screw it up (big surprise).
View 2 RepliesI'm using a new Mac Pro with Snow Leopard. We have Adobe MC CS5.I'm experiencing serious problems with Flash CS5. The program locks up at "Initializing Tools" for several minutes at start up. Once the program opens it will crash if I try to create a blank document. Other Adobe programs work fine.Flash CS4 worked fine on this computer.Anyone have any ideas on how to fix this? I've tried uninstalling and deleting all adobe documents from the configuration folders. It just seems like this machine is cursed or something.
View 1 RepliesI have created a short animation in Flash CS4 which has one button with a URL link. the button shows up on frame 217, and on that frame I added the following action script:
[Code]...
however, the 'hit zone' for the button shows up from frame 1 of the animation. is there a way of getting the hit zone to start when the button shows up?
i have a flash clip that i am trying to imbed into a joomla website of mine, and the problem is that it doesn't auto-start. If i open the swf file it will show a blank screen until i right click play or ctr+entr, on the website it simply doesnt show the flash. here is the link to the swf file [URL]
View 1 RepliesI have tried gotoAndStop and gotoAndPlay, but both somehow disable other actions I have setup on the timeline, like on the website I'm making, 3 buttons, "Home / About / Info" it disables buttons from switching frames, very odd.
View 3 RepliesI have an FLV embedded in a ColdFusion page on a client's intranet site. This FLV plays perfectly on the test server. It also plays when the link to the video goes to the test server, rather than the intranet server the page is on. But when I set it up so the page pulls the video from the intranet server itself, the video will start, play for a few seconds, and then freeze. Sometimes (not always) after a minute or so it will play for a few more seconds, but then it will freeze again and that's it.
The file is embedded using FlowPlayer, but I've tried a different player (OSFlvPlayer) with the exact same result - plays on the test server, starts and freezes on the intranet server - so it's not the player. It's obviously the server, but what can I check? The MIME type is correct. Actually we tried it on both video/x-flv and flv-application/octet-stream (I saw the latter on a support site somewhere) and changing the value had no effect.
how to make a video start playing at a specified point in the middle of the video rather than from the beginning. Not sure if it's something that easily can be done in Dreamweaver or if it's involved with the flash settings.
View 21 RepliesI created a simple animation that is 90 frames long. How can I start and stop it at specific keyframes so it takes 3 separate mouse clicks to complete. Example: a picture is on my website. When you click it, the first 30 frames play and then stop. A 2nd click makes the next 30 frames play and a 3rd click makes the last 30 frames play.
View 6 RepliesI need to add 2 JPG images to the front of a video and then reupload it as YouTube video. I downloaded the video from YouTube as both a FLV and a MP4 file. Is Flash the best program to add the graphics? If so, how do I get it back to FLV or MPG format? Do I need to get the orginal file from my distributor?
View 1 RepliesI've got CS4 for Mac.I added a flv to my flash via: "File">"Import">"Import Video">"Load external video with playback component"Then it loads my flv and puts it on the first frame. How can I make it so that when I mouse over it it plays and when my mouse off it stops?
View 10 RepliesMy video is a bit jerky at the moment at the beginning. Can I somehow have my adobe swf player load up a generously sized buffer before it starts to play, or is that not the issue? Later on in the video, the jerkiness is not an issue.
View 3 RepliesI want to put a number of flash videos on a page so I need to stop them from starting automatically. Is there a way to go into the .html?[code]
View 1 RepliesJust wondering how to make my interval start when I want it to because im trying to delay a function but i only want that interval to work when the code is being executed so i would have to add some kind of 'start delay' code inside the function.
View 2 Replies
