I'm using Flash CS3 and AS2.0.I'm using the loadMovie function to load an external swf into an empty movieclip. The problem is that the external swf is bigger than the frame I am loading it into, so I'd like to load it in with specific width/height parameters (basically load it in and scale it down).
View 3 RepliesI've got some swf's that I want to be able to load in to an mc and for the swf's to fit to the size of the mc. This works with jpeg's but not swf's, maybe to do with the way they've been set up, but I can't change these swf sizes.The code I have, (that's from another thread) will load a jpeg and make this fit, but not an swf is:
Code:
// container movieClip x and y positions
var container_x = 116.45;
[code].....
Got a little problem with a flash project im working (pretty new to flash).I got an swf image gallery (AS2) which im trying to load inside another flash project (AS2) using the following code:
var c_mc:MovieClip = this.createEmptyMovieClip("container_mc",10);
var mcl:MovieClipLoader = new MovieClipLoader();
var mcll:Object = {};
[code]........
I have this ActionScript: function openNewCart(evt:Event):void { navigateToURL(new URLRequest("http://www.3dcart.com"),"_blank");} OpenCartPage.addEventListener("click",openNewCart);
Is there a way that I can have it open a 5 pixel window that automatically closes after it loads? Also, is there a way to specify within the actionscript where on the screen I want the new window to open?
I'm newer to flash. What I'd like to do is have it add a product to the shopping cart and close back down.If I can't do it straight from flash, I'm sure I can have the flash page open up an html page which redirects to the add to cart page and automatically closes, but obviously a much bigger pain in the butt, and it will only work anyway if I can specify in the actionscript for it to open a 5 x 5 pixel window.
I have problems in running a projector under win 7. My projector load several SWF and each of them load different external MP3 that plays during the show.Under Win 7 sometimes the sound (Mp3) stops.
View 5 RepliesI have built a flash SWF panel on the home page of this website http:[url].... The panel is working well except for the "Our Sweet Shops Movie" button (bottom left in the panel).When you click on the button, it currently brings up the [url]..... page in a new browser.
I would like the button to load an external SWF file called "shopsMovie.swf" which is exactly 620 pixels wide by 464 pixels high. The external SWF file is already built and working well. I just don't know how to call it from the current SWF.The code I have so far is below.
link1_btn.addEventListener(MouseEvent.CLICK, link1FirstClicked);
function link1FirstClicked(event:MouseEvent):void
{[code]...................
Recently, I found a great little Flash project that acts like a jukebox for external mp3 song files, and am using it on my website to play my song demos.I'm now trying to find if there is an existing solution like that for video. I just need some way to progressively download video files from my webspace when the thumbnail is clicked... and am now looking into some sort of Flash jukebox.
I've tried just embedding the video files into HTML, but they don't progressively download for some reason (even though they are saved as Progressive With Compressed Header). I've even tried using prettyPhoto (...a script that mimics a Lightbox like feature, where the whole page dims, and a floating window appears over your site, displaying any media, and allowing you to move back/forth through your list of media)..... works great, but again, not a progressive download, so you stare at a blank screen for a while.
Seems the only way it works is if I have the file on YouTube or some other site, then embed it or use the prettyPhoto app.So, can someone either tell me how to make the embedded file download (OT, but I figured I'd ask), or point at some existing Flash file that serves as a video jukebox, showing all media on a common window?
I'm importing images from a folder into movie clips located in my flash, the clip on my first frame loads the graphic, but i can't quite get the others to work[code]...
View 4 RepliesI have a drop down menu whereby the clicking of a button causes it to move to a specific keyframe in the timeline. I also have multiple buttons which load external swf files.The problem is when i navigate to the drop down menu the loaded external files keep dissapering because they are not on the keyframe where the drop down menu is actuated. Is there any way of coding it so that which ever swf file is loaded remains there whilst the drop down menu moves to its specific stage in the timeline?
View 1 RepliesI need to load files from the library of another .swf file (AS3). How to accomplish that?
View 1 Replieshow to load an external using a loader to show while its loading...my swf which is to be loaded is a gallery having jus one frame on which action script is placed..
View 10 RepliesI am trying to build a flash that auto-adjust its size to the browser window size, while leaving the content of the flash itself top-centered in the screen.I have found this solution [URL].. on How to keep centered stuff in this exact case so i am pretty confident i will be able to adjust that script to do what i want.
Now my problem is that if i put my content inside the movie-clip (centerrectangle) with all the animation require, link and other stuff, the movieclip (center rectangle ) never have the exact same center, thus making the script go wild trying to always adjust the location to the variable size of the movie clip.
[Code]...
I've been searching to find a simple answer to external preloaders, but it seems there are many ways to accomplish this with ac3.I am new to as3 and this is what I've come up with so far:
green_mc.scaleX = 0;black_mc.scaleX = 0;var loader = new Loader();loader.load(new URLRequest("zibapistachiointeractivesmfilesize03.swf"));loader.contentLoaderInfo.addEventListener(Event.COMPLETE,
[code].....
I have two external swf files which I need to load to the main page of the website, one is the about page which consist mostly of text, the other is an image gallery.Both of them have the same intro animation at the beginning.
My problem is, while testing the main page using bandwidth profiler, the about page loads beautifully, while the image gallery plays its animation first before it even finalizes to load the whole page.
I'm trying to load a bunch of external swfs into a tile list. Once the swfs have been loaded I'm adding them to a dataprovider which I then sort and add to the tilelist. Like so:
dp.addItem({label:e.currentTarget.content.getLabel(), path:e.currentTarget.content.getPath(), source:e.currentTarget.content, cost:e.currentTarget.content.getCost(), category:e.currentTarget.content.getCategory()});
It works fine except that the way I'm doing it I have to add a bunch of functions to each swf to know which one is loaded and pass the correct info to the dataprovider.Is there another way to tell which swf has been loaded? Something like this.URLRequest. If I could tell something about it I could compare that to my original xml and find out all the other information I need for my dataprovider.
I have a movie clip called - contenct_mc ----------------inside this movie clip I have another movie clip called - Introduction_mc ------inside this mvovie clip There is another movie clip called - Footer_mc -------inside this movie clip on actions layer I have copied the below code to show clock.swf file....but the following code doesn't work
CODE:I am using Flash CS4 AS3
var R:Loader=new Loader();addChild(R);
R.load(new URLRequest("clock.swf"));R.x = 540;R.y = 205;
R.contentLoaderInfo.addEventListener(Event.INIT, RgrowLoader);
function RgrowLoader(evt:Event):void {
R.width = 200; R.height = 200;}
Is it best to load the preloader from external file or place it directly into an already existing movie?
View 3 Repliesi have created plain text field and managed to load it from external file using the AS3 code below. Now i want to load multiple text field but this time in a button, how can i do that?
this is my button code: proposal_btn
var textLoader:URLLoader = new URLLoader();
textLoader.addEventListener(Event.COMPLETE, textLoaded);
[code].....
[URL]regarding this tutorial I started my site [URL] to get some trasition effects but im getting somewhat different since the external SWFs take time to load. isn't it better to create "intro and outro" on the same time line instead of loading external SWFs bcos once the movie loaded as a whole will lead to smooth and contineous transitions.
View 1 RepliesI am using flash 8. and i have one .Jpg image (1024 x 768px - Its vary) now i want to load this image to my Movieclip. But my movieclip size is 130 x 140px. how is it possible to load and fix this movieclip size.
View 1 RepliesHow can I load a .swf into my current scene but not with the same size as my stage. ex. my stage is 500x500 and I want to load an external .swf in my scene at 200x200 and centered.
View 1 RepliesStructure: There is 1 main file that loads external SWF files depending on what is clicked on.One of the external SWF files loads its text from external text files. This works fine when viewing the SWF applet on its own. But when viewing as a whole site, the text doesnt appear. Very annoying.I made that particular SWF on my mums computer running Flash MX 2004The flash file itself uses the Scrollbar component from MX.Could someone tell me why the text doesnt load in this scenario? It runs fine on its own, just not as an external SWF.
View 4 RepliesI have a Flex application that just load an external SWF, but the application load and unload infinitely my swf.
[Code]...
I am trying to get a nav button in one movie (main_nav.swf) to target a my main movie (index.swf) and load a sub nav movie (metals_subnav_infinite.swf) into it. The sub nav movie will do a similar task - loading a portfolio swf into main movie (index.swf). Here is the file breakdown of my working files:index.swf - main final movie which loads "main_nav_infinite3.swf" on startmain_nav_infinite3.swf - loads main nav "main_nav.swf" and scrolls it infinitely (infinite menu)main_nav.swf - main nav with buttons that trigger sub nav "metals_subnav_infinite.swf" to load into index.swfmetals_subnav_infinite.swf - loads sub nav "metals_subnav.swf" and scrolls it infinitelymetals_subnav.swf - sub nav with buttons that trigger "folio.swf" (have not created this file yet!) to load into "index.swf"The script I was focusing on is in main_nav.fla and it is:
metals_mc_bn.onRelease = function() {
reActivateMenu();
this.gotoAndStop(3);
[code].....
Is it possible to know the dimensions of an flv loaded throught an URL ?
What if you want to load different videos with different sizes on the same video object? Does the video object change in size depending on the flv you're loading?
I am using flash 8. and i have one .Jpg image (1024 x 768px) now i want to load this image to my Movieclip. But my movieclip size is 130 x 140px. how is it possible to load and fix this movieclip size.
View 0 Replies...How do you do this? I'm gunning for <65 kb and need to figure out if my published swf will meet this goal. Is there a window or something (maybe a 3rd party tool) to let me know what the initial download size of my swf is?
View 2 RepliesHow do you load external library objects from an external swf? I want to have an external swf that only contains library objects that are exported for Actionscript, and load these from the master .swf file dynamically during the master swf execution. (I may have multiple external swf resource files)I want to be able to load the external swf, and then access it's library objects via actionscript in my main swf file.
View 6 Repliesas3 is new for me, but i would like to write a script using loader to load an external swf, and control the external swf. But I find I can't control the swf, because there are no fixed instance name. here is my script.
[Code]...
ActionScript Code:
var container:MovieClip = createEmptyMovieClip("container", this.getNextHighestDepth());
var mcLoader:MovieClipLoader = new MovieClipLoader();
mcLoader.addListener(this);
mcLoader.loadClip("crossball.swf", container);
function onLoadInit(mc:MovieClip) {
trace(container._width);
trace(container._height);
}
This always traces the width/height of the content of the external crossball.swf file, not its stage dimensions. So let's say crossball.swf has a document size of 200 by 200 pixels and in it is a shape of 115 by 30 it will trace the last as the width/height of 'container'. Is there any way to get the stage dimensions of an externally loaded swf through moviecliploader?