I am on Flash 8, I created two layers, put a motion tween on the one (changing tint). Both layers are extended out to 80 frames. The movie does not appear to play with Control/Enter, however it does play in Flash itself. I have done this hundreds of times, I have not run into this.
View 2 RepliesIs there anyway to disable the movie from playing when I hit Enter? I've got a button press later on that needs Key.ENTER. I could change it, but it is the only key that makes contextual sense.
View 1 RepliesI am using AS2 in CS5.5.I am creating a project for a class that introduced me to adobe flash. The issue is I have gotten to a certain point about 15 scenes. During say the 15th scene scrolling through the timeline animations works fine, playing it on test scene works fine. When I go to play it on test movie it stops at a certain point. At first I thought it might have been a misplaced stop action but there is none to be found. The weird part is every other scene I create after that continues to freeze as well, the images are there, but the animations won't play. All my previous animations play before those with the issue, it's justThese new ones won't play for some reason in test movie, but work completely fine in test scene and the timeline.
View 4 RepliesI am in the middle of creating a website using Flash CS5. I opened up my .Fla file one day to continue my work but I am no unable to access buttons and movie clips. When creating movie clips or buttons I am unable to get inside them, when I hover my mouse over them there is a white hand icon which never used to be there it was always just a normal mouse icon. I double click to enter inside the buttons/movie clips but nothing happens. This happens to existing movie clips and buttons on the page and even when I create new ones. I really don't wanna have to start this website again.
View 1 RepliesI am trying to play a simple movie clip when the playhead gets to a frame label called "home". The moveclip is called "playRollClick".I am trying to write this in as3.The code below is what I've come up with so far, but it doesn't seem to work.
addEventListener(Event.ENTER_FRAME,playRollClick);
function playRollClick(event:Event) {
rollClick_mc.play();
}
Is it possible to have one swf movie control the content of another swf movie?
View 3 RepliesI want a swf file that will play other swf files one after the other. They are swf, not video files, as I need to change everything on the page when the video stops playing. So, one swf opens with a custom page - plays a video - and then the next swf will open and do the same thing. There's much talk about 'typing stop(); on the last frame of a video" - As far as I can see - everything is automatically sitting on a single frame in Flash - whether it's scene 1, or I open the movie file - the movie is all playing in one frame. If try to simple put different material on a second frame, it loops back and forth between one frame of each movie (it will change the background, and video - but I get only ONE frame of each movie - not the full movie before switching).
View 9 RepliesI can download video from youtube as FLV.Want to play back in my Flash swf file without sound.How do I mute the sound during user playback?
View 1 RepliesI am relatively new to Flash development. I created my first movie with a poster board. It appears to work fine on my local machine, however, when I publish it to my production server, the poster board displays, but the click to play button does not play the movie. The page is located at: [URL]. I copied all of the published files directly to the production server.
View 1 RepliesI have some movie clips nested and at some point one on the left side should call one on the right side and it's not working and I'm pulling my hair, and I'm opening this thread for therapeutic purposes, I'm so angry I can't see straight
one frame in the left MC calls this
_root.pages_mc.cpr_mc.charr_mc.right_mc.gotoAndPlay("Sidney");
and it doesn't work and I don't know why, as I have a root who has a frame with a pages_mc that has a frame with cpr_mc that has a frame with charr_mc that has a frame with right_mc and there is a label 'Sidney'well, that's all. I don't even know flash very well, but looks to me that logically I'm doing it right, but flashly I'm doing it wrong...
I am trying to make a shooting game and I am using the Pistol as a movieclip but it just won't stop playing!
View 1 RepliesI have a movie clip on my timeline and it has maybe 60 frames in it. There's enough space for it to play and loop, and when I press ctrl enter to preview it, it plays as expected. However, as I scrub through my animation, the only things that play are the motion tweens I made. The movie clip just stays stuck on the first frame. I was curious so I exported it as is right now and it goes through the frames correctly there too. However, this is fustrating because I want to see the movie clip cycle through it's frames when I scrub through my timeline!
View 2 RepliesI have the follwoing code to control a Flash-based presentation but BACKSPACE and ENTER lkey are not working. I am puzzled. PD: All the rest of the keys works fine.
[Code]...
I am currently working on flash 8 tool.I wanted to know how to add control to a movie clip ,as in, how to play animations of an SWF file if the mouse is clicked anywhere on the movie clip
View 1 RepliesI would like to ask the script to control movie clip?clicking the button, play starts the eventclicking another button, the event starts stopbut I've tried and failed.
View 1 RepliesI have used a loader to play a swf, and I've managed to scale it like I want it - now I would like for it to fade in and out. How do i do that? Below is the as3 script I am using:
var loader:Loader=new Loader();loader.contentLoaderInfo.addEventListener(Event.COMPLETE,f);loader.load(new URLRequest("BldgBanner_r3an.swf"));addChild(loader); function f(e:Event):void{loader.scaleX=.80;loader.scaleY=.80;}
I have a movie clip with buttons placed on the stage. I set the buttons in the movie clip to GoToandStop on unique frame labels on the stage. However, the buttons are not working.
View 26 RepliesI am making a banner that has multiple movie clips sharing the same area, creating different rainbow effects when different areas (invisible buttons) are moused over.
First of all I couldn't figure out if there was a way to have one invisible button over the whole area that changed to a different colored effect with each mouse over (first mouse over the black and whites would change to reds, second would change it to blues, third would change it to browns, etc.). Since I couldn't figure this out I settled on creating three buttons covering a third of the banner each, so when the mouse passes over one button it changes to reds, over another button it changes to blues, over the third it changes to browns.
The effects are movie clips where each frame has another stripe changing color so it goes in a wave effect from one to the next, and then goes back to white and black in the same manner. The first frame of each movie clip I had to turn into a nested movie clip so I could turn the alpha to 0, since I was going to have these color effect movie clips on top of one another in the main timeline on different layers, and so you could see the effect even if that color layer wasn't on top. I used the same nested movie clip with zero alpha for the first frame of each color effect clip (reds movie clip, blues movie clip, etc), so I dont' know if that's an issue.
Anyway, it seemed to work fine for a while, but after working on it for a while longer (and not getting any further since I removed most of the changes I made), now when I test the movie the mouse over does not seem to work correctly. It works fine, seemingly, for the first time I mouse over each button, but in order to have it work again I have to mouse over the button twice, and then it will pause randomly during a part of the clip and I have to move my mouse back over for the movie clip to continue.
I can't tell if this is because of the overlapping movie clips, or because my buttons are messed up, or if my actionscript is messed up, or if the timeline has to be longer, or what. Currently the timeline is 55 frames, the same as each movie clip.
I put a movieclip_instance.stop(); command in the first frame of the main timeline, is there a better way to do this? Should I put the stop command in the movie clip itself?
Here is a section of my AS in the main timeline, this is my first time programming ever, in any language, and trying to learn from the internet is more difficult than I thought it would be.
redmovie.stop();
red_btn.addEventListener(MouseEvent.ROLL_OVER, playRed);
function playRed(event:MouseEvent):void
{
redmovie.play();
}
I have an external swf file loaded in loader component. The external swf loaded in loader component is stopped initially. I want to play it by a button outside the loader component which is located in the main swf movie.
View 1 RepliesExcuse the probably simple question but I'm just starting off with Flash.I have imported a few video trailers directly into flash and saved them as movie clips. I want to be able to insert these movie clips onto the main timeline and play them one after the other, repeating once they have all played. On the main timeline I have set a layer for each clip and a keyframe where the clip is inserted for each layer. When I go to play the flash file, it is showing the first frame from each movie file and then moving to the first frame of the next movie file. What do I need to do to make flash play the entire movie file in that specific frame before moving to the next frame where the next movie file is and playing all that movie?
View 7 RepliesI have a Tree Control inside my Flex Application which I want to edit on a doubleclick on a tree item. I found the properties doubleClickEnabled= "true", doubleClick="startEditMode()", and editable="true". With these functions I can detect a double click and I can change the editable property to true based on a double click. The problem is that after I double clicked on a Item i have to click once more to really enter the edit mode. That doesn't seem to be intuitive at all..
View 3 RepliesI have a simple animation that I would like to control the speed of the movie using the right an left arrow buttons. Keep pressing right arrow to speed up, and keep pressing left button to slow down.
View 4 RepliesI do not know how to insert an animation stops to give the presenter time and forward or backward in a linear and PowerPoint by pressing any key. Similar to typical PPT slideshows and will insert a small clip light and animation films. "My idea is that every time they click on any key (no button) on the film, forward motion up to a certain frame and so on until the end of the presentation "
View 1 RepliesI have created a series of Symbol MovieClips which I load through ActionScript on the first frame of the main timeline so that they play sequentially. I dynamically create each MovieClip, add it to the Stage, and setup an enter frame listener.On the last frame I stop and remove the clip, and repeat the process with the next clip.These animations play sequentially as intended. However each clip has an audio sequence on its timeline.These play simultaneously at the start of the main timeline.I've tried each of the Sound Sync options on the first frames within the Symbol clips.With the Stop setting the audio doesn't play, but Start, Event, and Stream all cause the audio to play at the beginning of the main timeline which seems to contradict the documentation I've looked at.
Is there a straight-forward way to sync the audio to the Symbol clips, or does the audio need to placed on the main timeline?I'd rather not do this as it is much easier to sync up the audio for each symbol clip with the animation when I can work with the smaller audio snippets and not have to test the whole movie.
I've got an infographic I'm working on, and every time I roll over an image (a ring) the alpha goes up to 100, then I roll out and it goes back to 50. That much I'm good with.
Then, I click on each one of them, and a movie clip (built inside of each ring/button) pops up and plays. Fair enough.
I've got a script (ugly, but it works!) that will hide all other buttons while this movie clip is playing. But, when I click to close it, I can't figure out a way to make them reappear. I tried putting visible = true again for all of them, but no dice.
The actionscript for it is right below.
I'm not sure if there's anything I can do to make it modal in AS3 or something like that. Or should I go ahead and set it up in a parent/child kind of way (not too well-versed in that regard.
All the buttons to click on are in the same layer and I'm not sure if making them different layers in Flash would make any difference.
stop();
ring1926.movie1926.visible = false;
// add a rollover to make the inside movieclip appear
[Code].....
Basically I have a flash website built on different frames of the timeline, the simplest way I think.Some of these frames have movie clips embedded into them using the flv playback component class.The problem I have is the following, the site works fine and videos play fine, but whenever I navigate offa part of the website to another, from a frame to another - the sound of the clips that were playing keepsplaying on the background and never stop and it keeps building up every time I navigate of.f each page.I want to remark that I believe is not only the sound that keeps playing "invisible" but the whole clip butThis is the AS code for my buttons on an example frame, would you be so kind to tell me what I should add or change
stop();cvbtn15.addEventListener(MouseEvent.CLICK,onClick25);function onClick25(event:MouseEvent){ gotoAndStop(27);}showbtn15.addEventListener(MouseEvent.CLICK,onClick26);function
[code].....
I would like to if someone to know why i have so big delay in my flash main file when I go to test the preloading bar with duble control enter... I have enable the status report file in flash wich say to me was I load a class (AS 3.0 Classes Export Frame) but i dont link any class in my file..
View 1 RepliesI'm developing a touch-screen Flash application for a shoe store, and it runs fine initially, but slows down toward the end of the day. I've been diligent with removing event listeners and so on. I've now narrowed the problem to be very specific - it's one section of the application causing the problem, and one part of that section:
- I have a main movie clip which contains the animation, which itself contains 5 nested movie clips, each with their own timeline. All movie clips have a stop action on the final frame. images are transparent PNGs with outer glow "filter" - the issue is not with performance as such, but with CPU increasing over time. Each time you play the clip, there is a small amount of CPU usage that 'sticks' and doesn't get freed up. What happens is that if you play the movie clip many (MANY MANY) times, then eventually it starts to slow down. Mac's Activity Monitor shows that the idle CPU usage is increasing slowly, over many times of playing the clip. It's insignificant with each play, but adds up over time.
You may be inclined to say: oh filters effect CPU, so it will be slow - but it isn't slow until it plays many, many times. Initially it's fast. I've uploaded a .zip with .app and .exe versions of my problem section. There are two files of each type: AutoPlay.app (& .exe): plays the problem clip repeatedly (I've just removed the final 'stop();' frame), so you can leave it open and come back in half an hour to see it slowing down.
ClickToPlay.app (& .exe): Plays the problem clip once when you click the 'play' button, so you can click several times, let it return to idle, and verify that the idle CPU usage is in fact increasing.
[Code]...
I am making a web site in flash in which I have multiple movie clips.I have mc_buttonMenu on the main timeline.Inside of mc_buttonMenu, I have 3 buttons that are all button symbols.From the main timeline, I have a movie clip called mc_allPages.In this movie clip, I have a few layers.I have the content layer.This layer controls how my pages display.I have another layer called labels.I labeled frames 1 to 10 as 'home' and layers 11 to 20 as 'contactUs'.I have another layer in mc_allPages called actions.I put a stop(); on frame 10 and frame 20 on this layer.I want to be able to control the movie clip mc_allPages from within the movie clip mc_buttonMenu.I put some action script in various places, but it never worked.I tried this action script:
_root.btn_home.onPress()
{
Gotoandplay("home");[code]...........
I tried placing that code on the main timeline, inside mc_allPages, inside mc_buttonMenu and split up into both buttons appropriately for btn_home and btn_contactUs.Sometimes the animation would stop on frame 10 and sometimes it would just play through to frame 20 and ignore the stop(); I put on frame 10 inside the mc_allPages movie clip.However, whenever I pressed the button ( btn_contactUs ), it never went to the frame labeled "contactUs" in the allPages movie clip.
I am loading an external SWF file into my main timeline. The external SWF file contains an FLV video. At a certain point in my main timeline, the SWF file loads and plays the video. Is there a way to say...
If the VIDEO (FLV) is done playing, gotoAndPlay(X)?