However one problem I have encountered is the only way I can make the buttons appear after the video is finished, is by dragging out the single frame of video on the timeline to whatever length in seconds it is multiplied by the number of frames per second.
Is there some way to maintain each linked clip in a single frame and only move to the next frame (which contains the relative buttons) after the video is finished?
everyone out there that is smarter than me. I have made this little prototype video player, and it isn't working. It'll eventually become a nice little player show videos from our summer camp for the last few years, but first I want to make it work in a basic stripped down version. There is a playback component with one of the skins right above the three buttons.
Here's the ActionScript: btn1.addEventListener(MouseEvent.CLICK, vid1);btn2.addEventListener(MouseEvent.CLICK, vid2);btn3.addEventListener(MouseEvent.CLICK, vid3);
function vid1(e:Event):void{vidPlayer.source = "Video1.flv"};function vid2(e:Event):void{vidPlayer.source = "Video2.flv"}; function vid3(e:Event):void{vidPlayer.source = "Video3.flv"};
It runs fine when I test in in flash and even the .swf file runs fine alone, but when I put it in a .html file via Dreamweaver and in the published .html it doesn't run. What up?
i have a movie that has a swf player practically on every page playing a number of different videos.When I export it usually and play it on another computer the flash file won't play the videos as they simply are not there
View 2 RepliesI've got an FLV video linked to an external SWF (a substage) that is itself linked to another SWF (the main stage) The FLV plays fine if I publish and run the substage independently but when the substage is loaded into the main stage at runtime I lose the video, all the other screen elements from the substage work fine. I thought it might be a path issue so I hardcoded a fully qualified URL as the video source with the same results; works independently, fails when loaded into the main stage at run time.
Flash CS5/AS3 using the video player component.
I can see and hear normally on youtube or some direct site. But if I try to veiw a youtube vid linked at some forum I can only hear the video and am unable to see it. I just upgraded to Windows 7 64 bit. The same thing happened on my laptop when I upgraded to Windows 7.
View 3 RepliesI've tried exporting a MOV file using Flash 8. I've tried converting to a MOV using ffmpegx. Neither have worked.
View 1 RepliesI am creating a Flex 4 project and would like to do an actionscript based login with encryption, but I obviously don't want it to be easily decompiled.If I dynamically link to a swf file that is in a "non-browse" directory, would a decompiler of the base application actionscript file also give the code of the linked file? For example
[Base Directory]
index.html
app.swf[code]....
how do you setup a full Flash web site, do all files including linked docs go in one folder?. are you suposed to use the publish pannel? The Flash site i am trying to create is to be used as an intrenet site that resides on the server how do I name links to doc in that folder?
View 1 Repliesknow if the ActionScript 3 Flash Video Gallery ([URL]) can play .F4V files?
View 6 RepliesI have no experience with Adobe Flash because others have done this out of house in the past. (time has come for me to learn - quickly)
I need to simply create "swf" files from a number of videos I have finished in Premiere Pro 5.5.
These videos are 800 x 600 videos that display at "point-of-sale". The spec is swf and not flv.
(I do not need to do anything else in Flash apart from create the video file with the swf extension.)
How can find out the linked url of the image in the flash of a website? I looked for the image url some time. but couldn't find itif find the linked url of the image, and i want to alter an image linked url address. where is the code in?
View 3 RepliesI have Flash CS3. I have created a flash file. If I click on the SWF file I have no problems opening it It plays. It looks nice I'm the man.However, now when I try to publish it, the HTML file will not work. It says "windows cannot find this file,you have typed the location correctly".I am double clicking directly on the file and not typing anything, in fact I was considering checking on Ebay to see if I could upgrade my PC to have eyes.The feature has worked previously, which leads me to the conclusion that something else has changed. I have tried using the publish setting, I have also tried using Dreamweaver to embed the file, and have also tried manually inserting the necessary code after seeing some on a website.
View 4 RepliesI am working with a Flash template that includes a window linking to an XML document. We are trying to have three scrollable columns instead of what we have now which is the one block of text provided through the XML document.
View 21 RepliesMy company is working on a casual game which is entirely made in Flash. To speed up development/compile time we split some of it up into SWC files, for example dialog controls, cutscenes, particle effects are all controlled via SWC files. This was working great up until a few days ago, we have been working on this project for about 8 months with no major problems. However, now all of a sudden, when we compile the game, none of the SWC files work. The game compiles and runs ok, but nothing from the SWC files are working.
The strange thing is that if we remove one of the SWC files from the folder (the game reads all the SWC files from one folder) then the game will work. Even if you remove a SWC which isnt immediately used by the game it will still work. It's almost as if there is some limit to how many SWC files you can have loaded. (There are only 10 SWC files in the folder we are loading from).
After finally making a button with an animation in it, I get stuck with the button actually working. I followed this tutorial; [URL] for the most part. And when I link the button to an URL like it uses as an example in the tut it works. But when I want to link it to a frame label in my website it doesn't work. Atm the code in the movie clip on the hit area looks like;
on (rollOver, dragOver) {
gotoAndPlay("on");
}on (rollOut, dragOut) {
gotoAndPlay("off");
}on (release) {
gotoAndStop("Scene 1", "who")
}
The rollover/out works fine. But the link isn't working within the Flash file.
Here is the .fla: [URL]
And a CS3 version: [URL]
Using flash 8 pro, I've imported a video clip and embedded cue points at the first and last frames - these are named 'intro' and 'outro'. I have the flv paused at the first and last frames via the component inspector, and it is a 'talking head' type affair - all good so far.
At the very end of the video clip I want the 'outro' cue point to dynamically load a movie clip from the library with the linkage name 'p-overlay_mc' which will, in effect, blend a logo over the video when it ends. Can this be done?
I guess this sort of cue point triggered event is the equivalent of an 'enterFrame' event. My guess is that i will need a script from the root timeline targetting the cue point within the .flv, but i really don't know the script needed.
I can't seem to download the flash files from the address.i click on page info and find the embeded flash,but can't download it. Another, how can I convert flash files from youtube to my ipod? I found an excellent flv converter, but not knew if it could convert flash from youtube.How to make flash suitalbe for youtube?
View 4 Replies- I can import a single AVI video file and convert it to an FLV video.
Problem: I have two AVI video files... one 4GB (20 minute) long and one 2GB (10 minute) long... and want to combine them to have a single 30 minute long FLV video file.
Question:
- Can I do this in Flash? When I "convert" a single AVI video to a FLV using the File, Import method... I can't really see the video on the Flash time line.
- I tried doing a File, Import for file-1.avi and then doing it for file-2.avi... but the two were on top of each other... and not end to end.
I've published Mac projector files and .exe file from Flash CS4 for several months without issue. For the past week when I've published Mac projector files the .app icon appears on my desktop but when I try to play the file the dock opens but the file doesn't play. Any Mac projector files I published prior to this problem play fine.I've tried creating a new .fla file and have reinstalled Flash but I'm still having the problem. EXE files and SWF files play fine. Also, the Mac projector files publish at about half the file size they did before this problem, while the EXE and SWF files are the same size.
View 3 RepliesWe have developed flash video player which needs to playe large videos (at least 500 MB videos).We have some issues in the player right now.I am playing a 100 MB + video, it start playing and say it is buffering upto 50% of that video. Then I am closing that page. If I take that video again, it starts downloading from beginning. It never resume downloading from where it buffered previous time. But for small video files, this is looking ok. Is there any size limit a video player can buffer?Is there any better way to play large videos (more than 500 MB). Any other protocol or any other settings in flash player?
View 1 RepliesIt is easy to be confused I'd bet but I will try to spell it out very simple I have this micro site that has 4 flv videos linked from where I uploaded them. The videos seem to work fine, if I type in the directory to the site itself.. (mysite.com/myswf.swf)
But when i utilize a preloader file, that loads the site, the videos do not load. I figure it is some linking break in using a preloader swf. Because the preloader has a different name, then the site's swf, how should I write out the directory to the flv files in the site flash file so it can load when using a preloader
I've inported a flv video and embeded it in one of the templates flash has, when i publish it and I go to the video.html file it plays, when i go to the video.html via my website I get the loading type image on the tracker bar. what is wrong? THe files are all linked correctly, it's video.swf as everything is in my "video" folder.
View 4 RepliesI have masked the video clip. The masked clip is working fine. But the Actionscript 3, which contains 2 more SWF external movie clips not loading those files. Once I remove the mask they start working.
View 9 RepliesOn the mxmlc command line, I can include paths to RSL files. I can choose to link these RSLs at runtime by setting
-static-link-runtime-shared-libraries=false What if I need to link to some rsls and embed (static-link) other rsls? Is there a way to set the link settings for each rsl?
I installed Flash CS4 Professional trial version for school use. It wouldn't install successfully. I deleted the font files the troubleshooting guide said to, tried again, but gave up. (I'm afraid to run regedit and mess up everything else I have loaded.) (I previously had the Fireworks CS4 trial version loaded, then uninstalled it.) My problem is this- I have it running, but it saves files and then they can't be opened, even if I use the save function often- it's worse when I create the file, test the movie and then save.If I try to open it again, it says "cannot open file." Once it opened a copy I had saved, and it appeared blank, even though it was 544 kb file size. I only need it for a few more days, one more assignment and I'm afraid my previous files are corrupt. I have Windows Vista Home Edition.
View 4 RepliesI am constructing a Flash animation and I was hoping to build it by scenes. These scenes would be individual SWF movies that I could import into my final Flash file in consequential order and when finished I would have a completed Flash Movie. There would be no interaction beyond Play/and replay. Where can I get information on how to construct this and is this a recomended way to do it?
View 7 RepliesI have a main movie on my site with buttons that display linked movies in the right half of that main movie. One of the movies is the kind that I only want to play through once, then stop. In the FLA file of that linked movie I've put a stop(); action in the final frame, and when played alone it stops accordingly. But when it plays as a linked movie, it continues to loop. What can I do about this? The button script on the movie doing the importing is:
on (press) {gotoAndStop("flash_dev");
flash_mc.loadMovie("cubeintro.swf");
clearInterval(_root.myInterval); }
how do i get more than one symbol linked to my class in my SoundClass.as file?
View 3 RepliesI created a MovieClip and linked it to a class, in the movieclip's frame actions I am making calls to methods defined in the linked class. At first I had the class in the root folder along with the fla file. I then moved it into a sub-folder, I updated the linkage property to represent the change but I am now getting an "1108: Call to possaibly undefined method".
View 7 RepliesAs far as I can tell the AS 3 is to the T. But when I test it in dreamweaver some of the pdf's and all of the websites will not open. It says to make sure the path or file name is correct... but the names are perfectly fine.it may be a security sandbox issue, but I don't know how to check that let alone fix it.Here are some of the code samples.
menventures.addEventListener(MouseEvent.CLICK, menventuresurl)
function menventuresurl (event:Event):void {var menventures:URLRequest = new URLRequest("http://www.menventures.com/");navigateToURL(menventures, "_self");trace("The menventures button was clicked");}[code].....