IDE :: Load A Linked Mc Via A Video Cue Point?
Mar 31, 2009
Using flash 8 pro, I've imported a video clip and embedded cue points at the first and last frames - these are named 'intro' and 'outro'. I have the flv paused at the first and last frames via the component inspector, and it is a 'talking head' type affair - all good so far.
At the very end of the video clip I want the 'outro' cue point to dynamically load a movie clip from the library with the linkage name 'p-overlay_mc' which will, in effect, blend a logo over the video when it ends. Can this be done?
I guess this sort of cue point triggered event is the equivalent of an 'enterFrame' event. My guess is that i will need a script from the root timeline targetting the cue point within the .flv, but i really don't know the script needed.
View 1 Replies
Similar Posts:
Jun 16, 2011
I've got an FLV video linked to an external SWF (a substage) that is itself linked to another SWF (the main stage) The FLV plays fine if I publish and run the substage independently but when the substage is loaded into the main stage at runtime I lose the video, all the other screen elements from the substage work fine. I thought it might be a path issue so I hardcoded a fully qualified URL as the video source with the same results; works independently, fails when loaded into the main stage at run time.
Flash CS5/AS3 using the video player component.
View 5 Replies
Mar 28, 2011
Hi I am trying to create an image scroller that just scrolls images from point a to point b on load horizontally in an infinite loop. I just used a code snippet to move it horizontally but don't how to get it to stop and at point b and loop again from a.
ActionScript Code:
game1.addEventListener(Event.ENTER_FRAME, fl_AnimateHorizontally_3);
function fl_AnimateHorizontally_3(event:Event)
{
game1.x += 20;
}
View 0 Replies
Jul 17, 2011
I can see and hear normally on youtube or some direct site. But if I try to veiw a youtube vid linked at some forum I can only hear the video and am unable to see it. I just upgraded to Windows 7 64 bit. The same thing happened on my laptop when I upgraded to Windows 7.
View 3 Replies
Feb 15, 2011
However one problem I have encountered is the only way I can make the buttons appear after the video is finished, is by dragging out the single frame of video on the timeline to whatever length in seconds it is multiplied by the number of frames per second.
Is there some way to maintain each linked clip in a single frame and only move to the next frame (which contains the relative buttons) after the video is finished?
View 7 Replies
Sep 28, 2011
It is easy to be confused I'd bet but I will try to spell it out very simple I have this micro site that has 4 flv videos linked from where I uploaded them. The videos seem to work fine, if I type in the directory to the site itself.. (mysite.com/myswf.swf)
But when i utilize a preloader file, that loads the site, the videos do not load. I figure it is some linking break in using a preloader swf. Because the preloader has a different name, then the site's swf, how should I write out the directory to the flv files in the site flash file so it can load when using a preloader
View 2 Replies
Nov 29, 2011
How can find out the linked url of the image in the flash of a website? I looked for the image url some time. but couldn't find itif find the linked url of the image, and i want to alter an image linked url address. where is the code in?
View 3 Replies
Jun 24, 2009
- I have a player.as with code to control playback of videos
- I have a skin.as with code to control and organise skin components
- The skin.as file loads a "shared library" (quotes as I don't think I'm doing this correctly) which is essentially a swf file with nothing on the stage. It's library contains things like: play buttons, scrub bars etc. all these assets have associated, linked class files to add functionality.
1. Load the containing swfs
2. Create new instances of the linked classes
3. Add them to the stage to be used.
However, there is an issue preventing me from using the linked assets in this way - I can't use the linked assets unless-
- I add something to the stage of the "shared library" swf
- I then do something like skinSwf.addChild(libraryFile)
What I want to do is just use the linked assets, not have to deal with any other parts of the "shared library" file.
View 4 Replies
Jan 6, 2010
I have a project where I am bringing in one video with a cue point at the very end with the name of "End." I'm trying to have the next video play when the first video reaches that cue point. I keep getting this error: 1046: Type was not found or was not a compile-time constant: MetadataEvent. Here is the relevant code I believe:
[Code].....
View 7 Replies
Jul 27, 2009
On the mxmlc command line, I can include paths to RSL files. I can choose to link these RSLs at runtime by setting
-static-link-runtime-shared-libraries=false What if I need to link to some rsls and embed (static-link) other rsls? Is there a way to set the link settings for each rsl?
View 1 Replies
Oct 12, 2009
everyone out there that is smarter than me. I have made this little prototype video player, and it isn't working. It'll eventually become a nice little player show videos from our summer camp for the last few years, but first I want to make it work in a basic stripped down version. There is a playback component with one of the skins right above the three buttons.
Here's the ActionScript: btn1.addEventListener(MouseEvent.CLICK, vid1);btn2.addEventListener(MouseEvent.CLICK, vid2);btn3.addEventListener(MouseEvent.CLICK, vid3);
function vid1(e:Event):void{vidPlayer.source = "Video1.flv"};function vid2(e:Event):void{vidPlayer.source = "Video2.flv"}; function vid3(e:Event):void{vidPlayer.source = "Video3.flv"};
It runs fine when I test in in flash and even the .swf file runs fine alone, but when I put it in a .html file via Dreamweaver and in the published .html it doesn't run. What up?
View 1 Replies
May 18, 2010
im trying to make a website based on flash.and im trying to link flash to XML.And here is my problem.I have a layer called "Pages", and im working in one of the pages.I made a timeline, which also had few more pages (5 to be exact).I want to load 1 linked image (as in you click on the image and then load something) on each of the 5 layer based on XML File, and when its clicked it loads on a new page in the "MAIN" site. If thats possible. How would I make that happen?
View 3 Replies
Apr 6, 2009
I am dynamically loading external SWFs in a Main Fla in response to clicks on a menu.
The loading code is standard and works fine for all of the SWFs except one. When I try to load it I get the following error: Error #2044: Unhandled IOErrorEvent:. text=Error #2035: URL Not Found.
I am certain that the URL to the problem SWF is correct. The SWF itself doesn't load any other SWFs or images. The problem SWF is linked to an external class file and compiled with it. i.e. in the properties panel of the main timeline of the problem SWF's Fla I have entered the path to the external class.
1. there is no problem compiling this SWF with the class (it works fine by itself)2. if I remove the external class from the properties panel and don't use it the resulting SWF imports without a problem into the Main Fla mentioned before So the problem seems to be the fact that the external class is linked in the properties panel. Is this a path problem?
View 3 Replies
Oct 13, 2011
Im trying to make a video class so I can put in my src and video dimensions to load up a video .. I am wishing to implement this in the following way
[Code]...
View 2 Replies
Dec 10, 2009
how to make a video start playing at a specified point in the middle of the video rather than from the beginning. Not sure if it's something that easily can be done in Dreamweaver or if it's involved with the flash settings.
View 21 Replies
Aug 25, 2010
I'm working with Actionscript 3.0 and I'm working on a project that requires me to know where a certain point in a video is at all times and have it relay that information to me via trace. I'm having a hard time figuring out how to select a point within the video and getting that point to move with the subject.
View 3 Replies
Feb 23, 2012
I'm having trouble with a simple AS3 (CS5.5) project I have imported a video encoded through Adobe media encoder as a FLV file and have added a Navigation Cue Point at the end of the video as I would like the video to simply go to a frame number when the video has ended so it doesn't stop on that video.
I have used a code I have used on many occasions in AS2 which I put on a keyframe at the top where the video runs under and give the video an instance name of vid:
[Code]..
Ideally I just want the code go to a frame number when the video finishes instead of staying on the video.
View 1 Replies
Oct 12, 2010
I have a video that I don't want the beginning of, I know how to set the Cue Points but I am not very familiar with ActionScript 3.0 and would like to learn some code to start my video out at a cue point so I can put this video inside another flash video.
View 0 Replies
Oct 17, 2011
I'm simply trying to load an external swf on a cue point in an F4V video. I used the FLVPlayback component to add a cue point where I want it, and I have a separate swf that's just an animated button I want to play, but I can't figure out the AS to use to play the swf on the cue point.
View 2 Replies
Feb 8, 2012
I've been working on a video-centric project that requires a very specifically designed video player, which I've built from scratch -- no skin. Things were going great until I actually uploaded the video and SWF to my server and tried it out. Here's the issue: The video, which is an F4V that's been imported into Flash as an external asset -- I'm not using NetStream, nor am I using a Flash media server -- starts loading almost immediately. But when you use the custom-built scrubber bar to jump ahead in the video, it freezes up until, I presume, the video has loaded to that point, at which time the video starts again. If you open the SWF and let it sit for a few minutes, this isn't an issue -- you can jump back and forth as much as you want.
So clearly the problem here is that the video is loading from the beginning and the user can only get to a certain frame when that frame has already been loaded. But it must be possible to start loading from a specified point, right? After all, the video doesn't load all together and become available only when the whole thing is done. It starts loading at 0:00 and continues progressively. I just want to change where it starts loading by telling it not only to play at that point but to start loading at that point, too.
View 1 Replies
Jul 27, 2009
I have the code that works for one button to find a cue point but how can I make this work for several buttons and their respective cue points?[code]
View 3 Replies
Jan 19, 2010
I've created a video player using the flv component. I have images of cue points. The user should be able to click on an image and the video should skip or start at that cue point
View 9 Replies
Feb 26, 2010
Basically the code below has been designed so that a video starts at 52 seconds (rather than the beginning) when you press play. It works good right now, starts where it's supposed to, but I want to change the code so that it autoplays the video starting at 52 seconds. The problem with this though, is that when I try and set it for autoplay, the video starts at the beginning and doesn't wait for it to load to 52 seconds before it autoplays. Any input on the coding? I need it just so that the autoplay doesn't kick in until the video is loaded to the 52 second point
import fl.video.MetadataEvent;import fl.video.VideoProgressEvent;
import fl.video.*;
my_FLVPlybk.addEventListener(VideoEvent.COMPLETE, rewind);function
[code]....
View 3 Replies
Feb 27, 2010
I have been trying to do this locally on my machine by using the download simulator but the simulator doesnt seem to work especially when I give the player a 2GB file to load over a 14kbps connection, the file seems to load within a split second and absolutely no buffering occurs.My problem below needs to be answered before I can persue and purchase and set up a web server to run FMS as a production server, but understandably I do not want to do this until I know it is possible to do what I want to do.
Let say I have put a 60min video on the server which I want to stream. But I only want to stream the last 20mins of it. Am I able to set the player to stream from the last 20mins and for there to be no progressive download required before? I need the stream to start almost immediately from the start of the last 20mins and for it to continue plaing until the remainder of the video completes So essentially I only want to load a part of the movie into a stream and disgard the part of the movie I do not want to show.
View 1 Replies
Aug 6, 2010
I'm very new to AS3 and have not really worked much since AS1 and a little with AS2.I have a video that I set a cue point named "getURL". It was imported into flash as Load enternal video with playback componet. The instance name for that video is "gunny".The code written is suppose to detect that cue point then forward to another html document. The video runs fine but never forwards to another web page.
[Code]...
View 4 Replies
Jan 25, 2011
If i broadcast a video and divide it into packets, and when a users connect to the netgroup and receive the object from the group( the user will receive from specific time let say actual video is 10 minutes and user connect to the group, and seek video for last 5 minutes). how can i achieve this task. is it possible ? i am using flash player 10.1
View 1 Replies
Mar 3, 2011
Is there any way to change the registration of a video object (so that you can apply a tween effect)?
View 1 Replies
Sep 19, 2011
I'm having a problem and I do not think the solution. I'm new using Flash.I have a video player and now we are implementing an HD button, the player always starts the video and 360P format and stream begins, if the user click on the HD I need to save the time of the video when it was clicked and then call another file. mp4 720P and start it at the same point that was recorded.I've tried various ways using CONNECTION.STREAM.seek(TIME); and always starts at (0), I feel that because of not being in Buffering he does not understand
View 1 Replies
May 22, 2010
I'd like to start playing a web-based video at a specific time, say 2 minutes in, even if the video hasn't been downloaded that far. I thought I could just "seek" to that time but that apparently only works when the video is buffered first.
So for example, this:
Code:
nc = new NetConnection();
nc.connect(null);
ns = new NetStream(nc);
ns.play("[URL]");
ns.seek(123);
video.attachVideo(ns);
Seems to work if you have the video cached or buffered or whatever, but if you don't it gives the "NetStream.Seek.InvalidTime" error, which makes sense. I want to know if it's possible to start playing a video at a specific time, even if the video hasn't loaded up to that point.
View 1 Replies
Sep 19, 2011
Good afternoon staff. I'm having a problem and I do not think the solution. I'm new using Flash. I have a video player AS3 and now we are implementing an HD button, the player always starts the video and 360P format and stream begins, if the user click on the HD I need to save the time of the video when it was clicked and then call another file. mp4 720P and start it at the same point that was recorded. I've tried various ways using CONNECTION.STREAM.seek(TIME); and always starts at (0), I feel that because of not being in Buffering he does not understand. Can anyone help me solve this?
View 0 Replies
