I am not sure how to explain it but,.I would like to have a swf that has a button. When you click it, It would load a differnt swf.that would alow me to create a menu swf that when a user click a menu topic it would reload a differnt swf.
View 2 Replies
As part of a much, much larger project, a client has asked me to take an existing flash banner, change the graphic, text, and link to make 4 more that are almost identical. Though I haven't worked extensively with Flash, I am familiar with it and thought this should be fairly easy, right? (Unfortunately, easy isn't exactly the word I'd use.)
I'm trying to take an existing fla, and change just the graphic, text, and button link to make a nearly identical banner. However, when I import a new image to replace the old image, the button disappears. I've tried overwriting the current image as well, and while I have a new image to show on the banner, and the text still works just fine, AND I have the outline of the box that should house the button (it even shows in the library),
Additionally, I will need to change the link, and since I'm having this much problem with a button, maybe you could understand how that works as well, because I can't even change it on the original.
my website which involves private messages.The page in question has 4 tabs on it, one of the tabs called inbox displays a table of all the messages received, the subject of each message has a link which can go to another page displaying the message in greater detail. However what i want is for the content in the inbox tab to be replaced by the code for displaying the message in more detail.Here is the code for the inbox table
<div id="inbox" class="tab_content">
<table id="mail_header">
<tr class="mailHeader">
[code].....
I have a flash game where a mallot will move with the mouse and when clicked, activate a button on the mallot using "onRelease". When the button on the mallet is clicked it doesn't activate the "onRelease" of the button under the mallet's current position.
View 1 RepliesToday, I put a video into my website, the only problem is that I'd like to give it a close button (that would close the player, or make it invisible). How could I do that?
View 5 RepliesWe need the button to display an image on a button when clicked for a tic tac toe game.
View 2 RepliesI have a Start button on the title screen. I want the music to stop when you click on the start button. Also, I want for another music to start when you go to the next part of the animation and to stop when you click on another button.
View 5 RepliesI was really excited about trying Flash out, but I can't seem to get far enough to even do so-whenever I click the Text tool button the program just closes-any suggestions?
View 1 RepliesI found this code to play sound:
myButton_btn.addEventListener(MouseEvent.CLICK, buttonIsClicked); [code]....
I got it working fine, but was wondering how to program a function for another button to stop stop playing that sound?I tried a function with snd.stop(); but that seems to be incorrect.
I am trying to close on as I am attempting to get this incorporated into my website. It came with the recommendation to try the CS5 today to see if this will meet the requirement at the moment.There is a desire to take custom SWF files (I think there is something called Swish files too?) from various sponsors for advertisement purposes and place them on my website.The implementation was straight-forward to make them work through the webserver.I tried a custom example of making a button that upon mouse click would open up a new webpage in CS5 which did work for me.My problem is since the SWF files are finalized, there is no way to put URL information into those files.After doing a lot of searching around today, it appears that the best way to redirect a user upon click of a video is to:
1) Open up a new Flash
2) Import the SWF video file into the project
3) Create a Invisible Button over top the SWF video so when the user clicks, they are redirected to a specific URL.
But for some reason, when I tried to overlay it with a sample SWF file I imported, there was all this flickering going on to where both were made transparent to one another on the screen not to mention the video wasn't even visible at all.My hope was that the SWF video could be seen clearly while the button remained invisbile to handle the click on the video.Is there someone on the forum that is able to guide me fairly quickly with a fast-path procedure so that I can try this?
i dublicate my movieclip named mc2. (mc2 in mc1 moviclip). And my scrollpane 's contentpath is mc1. When i do that, it works. but if i make scrolldrag = true, my button in my movieclip doesnt work. How can i use scrolldrag and button click in scrollpane content ??
View 2 RepliesI want to create a button which in a press state shows an image and removes it when its unpressed.Now the problem im facing is whenever i click the button the image appears but it soon dissapears as i lose the click.
View 5 RepliesIn my following code "Btn.onRelease" doesn't work after "LoadImg()" was call, How can I solve this, because I want to detect a click on Btn once the new picture was loaded.
Here is my code :
var mcLoader:MovieClipLoader = new MovieClipLoader();
mcLoader.addListener(this);
function LoadImg() {mcLoader.loadClip("images/p0.jpg", Btn);
}LoadImg();
Btn.onRelease = function(){trace("onRelease");
};
I am trying to figure out how I can have my buttons keep a color after it has been clicked or pressed.This is important since I need to make the viewer understand what answer was correct.I have set the down state but I need my button to keep that down state color.
View 1 RepliesLets say i have a button on frame 1. And if you press it normal, you ll get to frame 2. But then if you click it on another way, you ll get to frame 3. How do i do that easy?! With another way i mean like shift click or ctrl click or is it an easier way?
View 3 RepliesI have created buttons with this Actionscript. They load in the external swf's fine, but when I click on them again they load them in again, and again, and again... What do I need to write in the code so it loads in fresh everytime you click on the button? (or in other words, cleans up the load in page before it loads in new files).
[Code]...
how to get 4 FLV to seamlessly run from one to another without the end user having to click a button?
View 4 RepliesWhen I'm watching something play, if I click on the expand button the whole monitor goes white nothing happens so I have to click Esc to go back?
View 2 RepliesWith the aid of Dreamweaver CS4 I've manged to create a temp 'under construction website'. This website has a fullscreen .swf looping in the background.
I have made 4 of these very short looping .swf files.Is it possible, by adding one simple button on the screen, for the user click and the next .swf background starts playing? So basically this button acts a 'next' button, and each times it's clicked the next .swf starts to play.
[URL]
Ps: check out the source code. The flash background code starts from '<!-- flash background -->'.
I need a simple image gallery to load when you click a button. I've tried shadowbox but have had absolutely zero luck. I'm not sure how to load it from a flash file and I know there is work that has to be done outside of flash like in the root folder. All I need is for a simple image gallery, nothing fancy, to open when I hit a button. how to use shadowbox in lamens terms or knows how to easily script a gallery that would be amazing.
View 2 RepliesI am trying to connect audio to the button so when I click on the button music it starts playing and when clicked again music stops.
View 5 RepliesI have found this fine example for multilanguage choice:URL...I have changed initLanguageSelector() to this:[code]It works OK with button component but I need it to work with simple movieclip or button.
View 2 RepliesI have a files that is loading and parsing a huge amount of data from a csv file and creating and plotting a graph using the data. All is well if I have the file loaded on the first frame of the movie. But if I pass in the URL by entering the file name in a text input field and clicking a button. The X and Y axis values disappear as do intermittent notes placed above the bar graph. I still see the x and y axis and it's hash marks and the bar graph (shapes) but all of the text is gone.
View 3 RepliesIt controls a collection of 6 "slides". Each slide has a corresponding button, and it also slides every x seconds when the mouse is still. I'd like the buttons (b1 through b6) to change once they are pressed (to a similar image, just with a black dot in the center, which shows it is selected) and then return once another one is selected. I have a very minimal knowledge of actionscript
[Code]...
when I use the Edit/Find and Replace function, the results portion at the bottom doesn't reveal enough information under Location. I can see "Scene 'Scene 1' -> Layer ' " and that's all. I know if I click on that line the relevant window will open but when doing a "Find All" it's useful to know more information about the Location instead of clicking on every line. That Location column of the window will not widen with the drag icon. I can move the dividers from the other columns to the left but not to the right.
[Code]...
I have a simple flash movie on a webpage.At the the end of the movie, I would like the player to disappear and be replaced by an image.As an example, imagine clicking play and watching a movie about Disney, then when the movie ends the player is replaced by an image which is a coupon to use at Disney.
View 1 Replies1 is the main body of the website, and the other file has hundreds of layers that each contain some sort of code that imports XML and JPG images to create a slideshow. Now, I have created a grey square and then on playing of it I want the square to be replaced by this Slideshow, but still be able to apply some motion tweens like Fading etc in the main body.
View 1 RepliesI'm having some real trouble getting .replace to actually replace something. Here's my code...
[Code]...
I can trace both newFiles[i] and keywords[i][whatever], but the replace doesn't replace anything. The regex is valid as well. I'm using regexr to test it, and it works perfectly there... but will not for me and I don't know why.
I would like to make a map in falsh, where first you see the country with the counties. When clicked to one county the map of that county would appear with the smaller regions in it. I made one swf where you see the country (country.swf) with the counties, and one for all counties (county1.swf, county2.swf, etc.).
I would like to get a solution to replace the original country.swf with the county1.swf when clicked to county1-button, or with the county2.swf when clicked to county2-button. Next to these I would like to place a go-back-button in all county.swf files. I tried to load in the other swf files, but than the original swf remained visible in the background, which is not suitable in this case.
I have read all threads and can not find a solution but i am not somebody with a lots of knowledge about actionscript so here is my problem i am using this script .
[code]....
the problem is that when i click on the first button loads ok but when click on second still showing the first movie clip in the back ,,,,, i have try everything without luck ,,,, i guess i need to keep reading but will like to find an answer to this situation ,
