I am trying to make a banner where two colored squares roll across the screen. The first blue square does just fine, however when trying the same thing with a green square (in a different layer) it does ok the first half of the tween, but reverses direction in the second half (where I placed a keyframe)- even though I rotated the green square the same way as the first half.
View 7 RepliesI'm trying to do the following:
1. Have a permanent animation on the background, running over and over again.
2. My buttons should control that animation. What I want to do is to reverse the animation (going backwards on the timelime) when the user press the button, no matter in which frame the animation is.
3. Finally, when the animation is "gone", the buttons must point to an specific label.
I'm not sure how to to the reverse motion thing and if that's possible usings AS2. BTW, I'm attaching the file (just 8Kb) to show the idea, the real animation in the background is gonna be a movie clip but it's heavy to upload and I don't believe anyone will download it.
I have an mc which when rollOver plays an animation (works like a button), on rollOut I want the animation to play in reverse... I have seen it done before using a fucntion, but can't seem to get it to work... If I just reverse all the frames and get it to play that on rollOut it doesn't work properly...
View 14 RepliesI have a 23 frame animation that is moved forward or back on a mouse over. The problem is trying to reverse it. It is ok until it gets to frame 1 then it just stops. I need to get it to jump to frame 23 and to start reversing aagain.
function reverseIt(e:MouseEvent):void{
rewind = true;
this.addEventListener(Event.ENTER_FRAME,revFrame);
[code]....
i am having a problem in reversing the animation in a movie clip i am posting the function i used on main timeline pls solve this
[Code]...
i have the logo rolling but would like it to have an elastic effect sort of bounce at the end of my motion path. how to add extra keyframes on my motion tween to achieve this effect
View 1 RepliesI want to make an e-card for a marriage in flash. The card opens from the top. How do i give an effect of the card being opened on click? or even the card being opened automatically!
View 1 RepliesI was visiting this site mentioned in a book about flash we sites [URL]. and i really got curious about the effect of the picture in the background. when you roll over the area they practically have an alpha tween...but i think it's not just alpha tween...i noticed that the brightest parts of the image you have rolling over are also the darkest when the Tween begin. is kind of "selective alphaTween"?.
View 2 Replies*trouble with gotoandplay and roll out functions* basically i have an after effects movieclip (followed the after effects button tutorial on this site) that i have made into a button. it works ok on rollover and rollout i use tweener which works a treat and when i click it goes to another frame and plays a small sequence of smoke exploding.
problem: its a look problem really. when i rollout the smoke click sequence tweens back to frame 0 as per my rollout instructions IS there a way for me to have the click smoke sequence play all the way through before going back to frame 0 on my rollout ? i see tweener has a oncomplete statment is that of anyuse? ive tried a few thigns but it always reverts to the rollout and reverses the footage.
[Code]...
Was just wondering if its possible to somehow have some AS code, to play like 1-20 frames backwards, instead of copying it to like 21-40 and reversing it manually in the timeline
View 1 RepliesI am updating source code I came across to AS 2.0 and I am having problems with the tweens. Here is what I am trying to accomplish in AS2.0:[URL] Here is the part of my updated code I am having problems with:
[Code]...
This is my problem: (1) I want the top image to tween to the right and up in X and Y direction and also slightly rotate. THEN I want it to tween back underneath the other stack of pictures in center of swf. However what is happening is that the depth of the topimage is being set under all the pics right away and the tween takes place under all the pics and not ontop. Is there a way for me to wait until the tweens are done and then execute my swapDepths line? Here are problem lines in detail:
[Code]...
i want to make my box animation come up from left to right direction, right now my box appear from top to buttom, how can i change my move direction of the box from left to right, i have nine box and three each other line, like picture below.here is my current code
function random_item()
{
var listItem:Array = new Array();[code]...........
how do i make the animation from left to right,
On a horizontal bar, text scrolls from left to right, continuously. The text is a fixed string of city names, and I've made it so that it loops nicely. This horizontal bar with scrolling text is part of a vertical animation, scrolling the bar in and out of view. The vertical tween starts after two seconds. When the vertical tween starts, the horizontal animation has started as well. At the beginning and end of the vertical tween, the horizontal tween starts over. I want it to continu.
View 1 Repliesi have a scroller developed in as2. it basically scrolls continuously in a direction until the direction of the mouse is changed. the images of course loop in the continuous scroll. now the problem is that for 10-15 photos its ok. but when i feed it with 180 photos, it seems to show only 11. why would this be? any restriction on flash ??
View 1 Replieshave a ball with the name of mc which can be moved using the keyboard .. when you press the left mouse button shoots the ball, this ball and the other flies in the face where the cursor was in the shot .. but if you move the cursor to another location and shoot a second time then the second ball is also flying in the direction of the cursor and the first ball change direction toward a second shot ..
ActionScript Code:
import flash.display.MovieClip;
import flash.display.DisplayObject;
import flash.events.MouseEvent;
[Code]....
how to make that first ball did not change its direction and continued to fly in the direction of the shot?
getting the current x position value of the tween object during the animation using Tweener.I want to move a movieclip across the stage, and at a certain x position, i.e. x=600, a new movieclip is added to the stage and chases behind the first one.
My current code looks like this:
Code:
import caurina.transitions.*;
import caurina.transitions.properties.CurveModifiers;
[code]...
I am using some tutorial from lynda for making tween animation for my inspiration on making web site in CS4 but in my 2-3 project I have same problem. Sometimes my tween crash in middle of animation? Is this beacouse I have to much code in timeline?
View 8 RepliesTrying to start an animation after a tween is done. Animation starts but way later, like 5 seconds after tween is finished.
Code:
var easeInPic:Tween = new Tween(bg, "alpha", Regular.easeIn, 0, 100, 1000, false );
easeInPic.stop();
function showPic(e:Event):void{
tweenPicEI();
}function tweenPicEI ():void{
easeInPic.addEventListener(TweenEvent.MOTION_FINISH, showMenuBar);
easeInPic.start();
}function showMenuBar(e:TweenEvent):void{
menuBar.gotoAndPlay(1);
}
I'm trying to make an animation and it seems like an impossible task. I'm not a beginner, and this is harder than it first seems to be.So this is what I need: to make a tween between a partial small circle to a big circle. What I mean is I want to use the Oval Primitive tool and on frame 1 I'll have a circle (radius 100px) with Start Angle: 0 and End Angle: 230 and on frame 50 I'll need the same 100px circle with Start Angle: 0 and End Angle: 300.
View 1 RepliesI got mcMaine that contains 5 other mc. Each of these mc contains animation tween in them.
I would like to make each animation start playing, individually, on a specific frame, in the main timeline.
Does tweening take more space to do than to animate with AS? Also, frames that are not wanted, do they take space too? I want to know because smaller the file faster the loading, right?
View 3 RepliesI have created an image in photoshop (96dpi, same as my monitor) and imported it as a png into flash where it becomes a bitmap. Once I had imported the image I went to library and allowed smoothing on the image and set it to lossless. It performs a motion tween and simply flys from one side of my movie to the other. However, the whole way it appears pixelated. I had done this on a previous movie with the same image, just with a different animation and I had the same problem. But in this case the 'allow smoothing' worked. Not this time though.
View 1 RepliesI have four movie clips with instance names of "purple_ob", "green_ob", "orange_ob" and "blue_ob" and four buttons "purple_but", "green_but", "orange_but" and "blue_but" I want to have the movie clips automatically fade from one to another continually with a 5 second pause inbetween, but then if the user clicks one of the four buttons it will fade the relevant movieclip in. Then if nothing else is pressed the fading will carry on working through the four images in a loop.
So far I have the movie clips fading on a button press but how do I implement the automatic fading from one MC to another?
I've added the code below into the first frame of my scene
//My actionscript 2.0 code
import mx.transitions.Tween;
import mx.transitions.easing;
[Code]....
I have a simple animation made of Sprites (Those Sprites are composed with two objects inheriting from Shape and TextField).Each Sprite has a Tween firing on the MouseEvent.Click Event.When the Tween animation starts the TextField disappear by itself.Do I need to convert the text to bitmap?
View 1 Repliesive made a flash banner 1000x500 with lots of objects tweening etc etc photos fading in and out,and ive being told to resize the banner size to 800x300but im having trouble when i do that,is there a way to get the everything that ive done into the 800x300 with out having to move all my objects around again and resizing each pic individualy,or do i have to start it from scratch again??
View 2 RepliesI am using this code to preform a tween action (a 'zoom in' animaion')
//Tween and animations
var myTweenAlpha:Tween = new Tween(lalBtn,"alpha",None.easeOut,0,1,3,true);
lalBtn.addEventListener(MouseEvent.MOUSE_OVER, mouseOverListener);
function mouseOverListener(evt:MouseEvent):void {
[Code] .....
And when its done I load the include file. How to I return back to the main part after the include?
I have made this animation, please click here to see it.
Username is hitenkajal.co.uk
password is sairam11
However am not happy with it because its not very smooth. I will like my animation like this [URL].
Is there a way to export it as AVI or any file type that support HD and get the same out put in SWF, i tried to export but the final output is very weak
View 3 RepliesI'm trying to create a website to display my architectural portfolio and I'm having troubles with a ROLL_OVER and ROLL_OUT EventListener. I have attached my fla file for you to look at to get have a better understanding of what I'm trying to explain.
What I'm trying to create are project thumbnails that when you roll over the thumbnail movieClip it will expand the other project thumbnails to the right allowing room for a brief summary. Also, the roll over will trigger a function inside the proj1 movieClip that plays the mc timeline, which simply removes a translucent colored layer (classic tween) to expose the project thumbnail in color. (You might want to reference the attached file) The problem I'm have is in the movement of the other thumbnail.
Problems are as followed:
A. When I roll off the thumbnail_mc the other thumbnails don't come back to their original locations.
B. The roll_over only works once. I would like to have it so that every time you roll over it, the proceeding project thumbnails should move to the right, and when you roll off, they should move back to the left to their original locations.
Now, I'm not sure if a if statement is the best way to move the other thumbnail or if I should use a tween. I tried some simple tweens off to the side, which you will see, but I can't get a addChild MovieClip to tween...I believe it has something to do with the instance name, which I'm not sure how to give an instance name to a movieclip that is a addChild...?
Attaching swf and fla for your reference.I am developing a animation with 4 MovieClips... on mouseover of movieclip it will grow and adjacent movieclips will move and shrink...I am able to develop the code...BUT....
1. On quick mouseover/mouseout event I am not able to stop the growing & shrinking of other movieclips.
2. Also I want attach a movieclip such that when I'll click on ONE .. a maximised Movieclip will open.