I'd like to use the same music player displayed multiple times on the same page, one for each song. But when songs are played, I want the existing play to stop. For example:
song1
song2
song3
I click to play song1, while it's playing, I decide to play song3 instead. Based on the default setup, song3 will start playing while song1 continues to play. I'd like song1 to stop when song3 starts.
I have a web site that displays a column of flash videos. The page is w3c-valid. The problem is that the page loads very slowly and sometimes crashes my web browser. Until the page is fully loaded, the videos are slow to respond and play. Is there a way to make these videos load their preview images only? What should I do to speed the page up? The videos are 360x264.
View 2 RepliesI am working with the open source flash player at [URL].. and I am trying to figure out how to limit one sound file at a time. I know this has been done on a number of sites but I am unsure how to approach it.
Scenario: A page has five different instances of the flash player. The user is litening to one song but clicks on another to listen to it.Goal: The first audio file automatically stops while the second starts playing instead of both playing at the same time.
Do I need to have some sort of javascript handler than interacts with the swf or something?
Looking for thoughts and ideas on establishing communication between isolated SWFs residing in a single HTML page. Need to place multiple SWFs in a single HTML page and was wondering if there was some way to send commands from one of the movies to the other wihtout reloading the page. (would prefer not to reload the page and all the components and have the page "blink" - go blank before loading new and cached data) Unfortunately cannot build this as a single flash object with multiple MCs.. must be multiple SWFs.
Have an idea or two on how to set this up with HTML framesets and loading subpages ( a cheat certainly and far less than elegant) but would prefer not to deal with the heartache that would entail - especially since areas of the page would still "blink" on loading.
I have 3 seperate .swf on a single html page which are all communicating with FMS on separate connections. Do you think there will be any stability issues? or connection issues. All the .swf use the same main.asc. There are no apparant problems so far just need an expert opnion.....a side note is I've also noticed an error in the error logs that says its detected a backwards time stamp when recodring. Whats that all about? The application seems fine. Using FMS 3.0
View 2 RepliesAs I am getting more familiar with FMS and understanding it better with the help of the wonderful contributors here on this forum, I am now curious about players.Players such as Strobe and REOPS to be specific.Are players all SWFs that are embedded in a page? I have seen some players here on the Adobe website that are stand-alone smaller windows that appear over the page. How is this done?So Strobe and REOPS...are we talking SWF code that is editable? You can see I am quite new to this. I'm on a roll, however and wish to continue understanding and learning.
View 6 RepliesI am currently working on a project that i need to have multiple flv players all displaying the same video simultaneously. I noticed that this causes a delay on the webpage when loading and the video doesnt start simultaneously for each player, so i guess the same video is loaded over and over again. Is there a workaround to that so i can load the video once and play it on the 3 players simultaneously??
var nc:NetConnection = new NetConnection();nc.connect(null);
var ns:NetStream = new NetStream(nc); var ns2:NetStream = new NetStream(nc);var ns3:NetStream = new NetStream(nc);
[Code].....
im using this player [URL] for my site and i am also using [URL] i have 2 instances of advanced player in one page and the backround player. I want to pause the other players when one of the 2 advanced players are playing, something like that: if myadvancedmp3player1 is playing (if i press the play button), pause myadvancedmp3player2 and pause backround_music. if myadvancedmp3player2 is playing, pause myadvancedmp3player1 and pause backround_music
[Code].....
I am trying to embed audio players in a drop-down content tooltip. I will eventually have lots of these on a page.My problem is this:When I close the div the sound continues to playI can also make them play at the same time.I would like them to autostart when you open the div, but when I do that they both start at once before you've even activated the drop-down content. I would rather not do the whole site in flash.
View 4 RepliesI have a flash player that plays an MP3 from my website. On one of my pages i have around 20 of these flash players embeded on the website. i've seen on other websites so when the user presses the play on flash player #1 and then while that's playing, they press play on flash player #2, it would first pause and stop flash player #1 and then start flash player #2 and so on.
View 4 RepliesI am working on a project where i need to support multiple players and platforms to play videos. Major Platforms will be: Windows PC,Mac PC,Apple Devices and Android. This is the precedence i will be following. First it will check browser support for Silverlight 3 or later then Flash then HTML5. If not any one of them is supported user will be asked to installed Silverlight. I wanted to know which pattern and strategy i should use in order to support this functionality. Currently i have investigated about some javascript api that can do this detection on client side easily and load the player appropriately.. but as many of browser could be without javascript support so this method will fails to play videos. Is there any way I can do this detection on server side and inject proper Player HTML on client end?
View 2 RepliesI want to have a number of scenes with video players on each. Pasting means I get problems with duplicative functions. I am okay with creating new instances, but still run into duplicative functions (like onMetaData) I just can't seem to get around. Is there an elegant way of telling flash at the beginning to create all new nc, ns, etc?
Below is partial code (the part that is the problem).
// Video setup
var nc:NetConnection = new NetConnection();
nc.connect(null);
var ns:NetStream = new NetStream(nc);
ns.addEventListener(NetStatusEvent.NET_STATUS, onStatus);
[Code] .....
I am currently working for a highscore system for my games website. and i have written the code for that. it only displays 1- players. i want to display overall top players when i click on top players url and want to display the monthly top 10 players when i click on monthly top players url.How to do this. i am trying since 2 days. i am struck at this point. kindly do look into this. the code as follows. For reference kindly look inot this. i need like this.[URL]
<?php
include_once("_data.php");
$game_name = "test";
$db_table = "newhs_" . $game_name;
[Code].....
I want a chart that has several separate series running in rows across. They are largely separate charts and should not overlap, but all share the same horizontal datetimeaxis. They don't share the same y-axis, however and that's where I'm getting stuck.I have tried having a linechart series and then a plotchart series, but it will only allow a single <mx:series> per chart without having them inside the same series which as far as I can tell will place the charts on top of each other in the z-axis. I can stack them and have them completely separate charts, but it was proving to be somewhat irritating having them align correctly.
Is there any reasonable way of combining multiple charts into one like this? Basically having rows in a table where each row is a different chart but the columns are consistent. or am I going to be best served just by stacking separate ones? an illustration of what i'm going for is here: http:[url]........
In one of our project we are using flex for front end, blazeds/java in the backend. Its an existing code where services are prewritten. I have to make calls to 3 services in the backend (basically 3 remote objects) and get their result and store the result in an object and show the data of this object in a view.
Now in front end we are using Flex and Parsley Framework. I was thinking of the following approaches.
1) Making commands for each service call and storing the result in a shared object (model) and then displaying this model in the view. In this approach the problem is some services are needed in some other web pages, but they donot need the same model. How should i handle this scenario ? Should i make a asynchronous remote call and fetch the result and then again dispatch and event with the event object storing the result.
2) Making a service call , wait for the result then make another call and wait for the result and then make other call, not sure if this is the right way ?
i started with a Multiple mp3 players project and i more complicated with that - as you see in the picture i try to do that when click on the play button for every song this switch the song that selected -first preloading + percentage the mp3 file and after play it immediately and of course there is stop button, pause button when choose a song the previously that play will be muted
View 4 Repliesdoes anyone know of a free tool that can convert each PDF page into a single swf ? Just plain swf, without any of controls like the ones you see in flashpaper
View 5 RepliesI have movies loading into various levels (not my choice, but the head designer set it up this way) and the client decided they needed a print function. I am trying to avoid adding a print function to each swf since there are a lot of them.I have a function for printing, but it only allows me to define one level. And often we need to print multiple levels because elements are stacked on top of each other. Here is my action:
Code:
on (keyPress "<Down>", release){
var my_pj:PrintJob = new PrintJob();
[code].....
i am beginner dont know how do display all country time into a single page using action script 3 in flex . do u know any example time code refer me . i will try that code .
View 2 RepliesI have a single page site that has a flash interface and a html nav bar that changes content on the site without a page reload. The problem is the client wants to see the click paths users are going though to access content ( using html nav bar or flash ui to get there ). I know I can use the externalInterface in flash to callback to javascript on click events but there seems to be no custom way to trigger building a click path.
Basically on a page that doesn't have per-page content I want to track the path users are navigating the site ( not per-click tracking but full on path tracking ) through. Is this possible through custom events of some sort or just not possible?
I have about 20-30 SWFs embedded on the same page and they all interact with browser's JavaScript. After about 8-12 of these have loaded, Firefox crashes. Will it help combining all these into a single SWF?
View 0 RepliesWhat I have done:
1/ A very simple Flash movie
2/ 5 very basic rollover buttons
What I want to happen:Everytime I'd hover the mouse on each button, I would like the background animation to run. And have the animation stop on mouseout for each button.I was able to make it on one button via this tutorial: [URL]But this doesn't seem to work with multiple buttons involved.
Is there a way to plot multiple data for the same value x? For example following points:
[1, 1], [1, 2], [1, 3], [2, 6], [2, 9], [3, 11], [4, 11]...
I have a doubt: When you open various flash pages in tabs, for example in Firefox, all those pages share the same Flash instance or each one use an instance of flash??
View 1 RepliesI have done words animation in flash and converted as swf. I have more than 300 small swf files. Now I have to merge all these files in to a single swf. Is there any software to merge multiple files to a single file. I don't want to use loadMovie, because I haven't used script in any of these files. Since it is an urgent project, I can't add code in all these files.
View 0 Repliesi have 4 movieclips on my stage , there are mc_1, mc_2, mc_3 and mc_4 and i also have 1 dragable movieclip (named ball), and i want something traced if my ball touch another movieclip, below are my code
ActionScript Code:
ball.addEventListener(MouseEvent.MOUSE_DOWN, drag);
stage.addEventListener(MouseEvent.MOUSE_UP, drop);
function drag(e:MouseEvent):void
{
[Code]...
I am trying to use an existing link with a flash file that is functional to also link to another page at the same time. Basically I am using Joomla and I have a flash file that has menus and pictures and such. I want to be able to click on a link within the flash file and still have it do its given function of pulling up an image or opening another menu or whatever the current function of that link is. The problem I am having is that I also want this link when clicked to navigate to a specific url to show aditional content on one of the Joolma pages.when one of the links in the flash file is click and it pulls up a specific image within the flash file.I want it to also pull up text or other content below my flash file that goes along with the image.
View 1 RepliesI'm building out a Flash / Flex viewer and I'm looking for a tool / software that will recompile several to many SWFs into one SWF file. I have an XML file and would like to load that into a compiler that would compile the SWFs into a single file.
View 1 RepliesI have a button that I want to work on multiple frames. Currently, I have a scene that automatically starts to play when the playhead enters the first frame (no stop command). I have an event listener in the first frame that listens for a click. After the click the user is supposed to go to another scene.
The problem is that the button is not working. I am assuming that the code in the first frame only applies to the first frame and I need to add additional code that applies as the playhead is playing across the multiple frames.
[Code]....
I'm building out a Flash / Flex viewer and I'm looking for a tool / software that will recompile several to many SWFs into one SWF file. I have an XML file and would like to load that into a compiler that would compile the SWFs into a single file.
View 7 Replies