I'm using flex sdk and trying to draw primitive geometry figures, what is wrong in following code? i tried without the trigger(placing) of button, but did not work.
<mx:Script>
import flash.display.Sprite;
import flash.display.Shape;
[code]....
I have to draw a circle using action script. The Circle Diameter has to be controlled by a button.
View 0 RepliesHere I what i need is : Start drawing first circle and when first circle is on half way, Start second circle.same way second and third circles. and after completing 3 circles, just gotoAndPlay 2nd Frame .
View 3 RepliesHow can I draw a simple circle using actionscript?
View 10 RepliesI'm moving on with my optics system in Box2D (which seems to run into its share of kinks and platform limitations, but that's a subject for another time) and I expect to have the need for a way to procedurally draw sprites for varying shapes of lenses.Really, the critical component of this process seems to be the ability to draw partial circles. By this, I mean a part of a circle if it were divided from the whole by a straight line through the circle's interior.
View 2 Repliesany techniques they use to draw a perfect half circle?
I've seen the curveTo() method, and I cannot seem to make it come out with anywhere nearly good enough results. It always looks like half of a skewed ellipse.
I don't *want* to use a mask -- since there will be other drawings on this same Sprite that I do not want masked.
To be even more picky -- I don't *want* to create the half circle in another Sprite and add that to my original drawing.
How do I draw a ring or a center less circle in as?
View 2 Repliesanimate the drawing of the outline of a circle over a set period of time, say 5 seconds?
View 1 RepliesI'm trying to construct an animation illustrating the angle of a circle.The user types in a value and the handle gets rotated on a timer tick. (Press Enter or the ndra-button to see the effect): Example So far so good.Now - my problem is when the rotation gets bigger than 360 degrees. I would like the arc's alpha to get darker, to see it draw upon the "existing" arc line. But I don't know how to do that and I can't find code for doing it, either.[code]The DrawingShapes.drawArc method comes from here.If anyone could point me in the right directon on how graphic updating works. I tried not removing the lineHolder from stage when it's updated, but that just made the line's alpha 1 instantly. I would like it to "gradually" get filled in when the arc exceeds 360 degrees.
View 1 RepliesI need to draw a circle in certain amount of time. I found this code but it uses an enter frame. Is there way this could be written so it can be controlled by time?
Code:
var speed:Number = 0.05;
var radius:Number = 50;
var angle:Number = 0;
var xpos:Number;
var ypos:Number;
[Code] .....
could anybody point me in the direction on how to create a circle on enterframe....basically, a circular loading bar. As the percent loaded goes up, more of the circle is created.
View 3 RepliesI have tried to draw a circle using drawing API curveTo function. But the result is not a perfect circle. Flash documents also suggest this method. Check this link >> This is the code I have used to make a circle of radius R and the registration point of circle movie clip is at the center.
[Code]...
I've seen it before, and I'm unable to properly label what it is..But what I'm looking for is the method to make an imaginary pencil draw on my flash..So if it were a circle (not connecting at the end, just off of meeting) I could use a mask to make it display in any direction but how do I mask the circle going clockwise?
View 0 RepliesI'm developing a game atm, and I need some help on the mathematics/coding of colliding circles (and their change in x/y speed). What i need to know is how to calculate the direction and speed a circle has after colliding with a static (non-moving) circle. I know how to detect a collision between the two, but I'm not sure about the maths I need to give the circle the right speed and direction after the collision
If i do know how far away the two circle-points (in the middle of each) are to each other (in both x and y coords) would it be easy for me to find the new speed and direction of the large circle in the example above? I know that I somehow should use the angles to pretend the circle hits a flat "wall" (as it only hits one point), and then calculate the new speed/direction. My only problem is that I'm not sure how to decide the angle of this flat "wall" and how x and y speeds should change when colliding with a wall that is angled. Does anyone here have any insight, links or tips on how I can du this?
i want to make one circle follow the mouse cursor, inside another circle. Similar to an eye looking at the cursor. Ive attached an example.
View 4 RepliesI have text in a dynamic field showing up as circle. I want to say if circle shows up change it to cercle (french).
[Code]...
What i need to know is how to calculate the direction and speed a circle has after colliding with a static (non-moving) circle. I know how to detect a collision between the two, but I'm not sure about the maths I need to give the circle the right speed and direction after the collision.If i do know how far away the two circle-points (in the middle of each) are to each other (in both x and y coords) would it be easy for me to find the new speed and direction of the large circle in the example above? I know that I somehow should use the angles to pretend the circle hits a flat "wall" (as it only hits one point), and then calculate the new speed/direction. My only problem is that I'm not sure how to decide the angle of this flat "wall" and how x and y speeds should change when colliding with a wall that is angled.
View 6 RepliesI`m working on a app that you can draw lines.....like circles, rectangles... my problem is when a user draw a circle for example....i wanna be able to paint (change color) inside of this circle. I`ve tried working on Shapes with cacheAsBitmap = true and Bitmaps with BitmapData but it doesn`t seens to work.
View 4 RepliesI want to create circle, and put 8 points on it. So, user can drag each point in order to change it's shape.
Is there any way to do this in flash?
I have some following code:
Ref. - How to draw a continuous curved line from 3 given points at a time
package{import flash.display.Sprite;
import flash.events.MouseEvent;
import flash.geom.Point;
[Code].....
So, can anyone convert these three point curve line to 8 points circle?
Trying to do circle circle collisions via math which I'm really having trouble with. One circle (player) just moves from keyboard. The ball reacts to the player. All the code shown is in my players class and I passed in a reference to the ball.
On my enterframe I have:
Code:
var xmov1 = xSpeed;
var ymov1 = ySpeed;
var xmov2 = ballRef.xSpeed;
var ymov2 = ballRef.ySpeed;
[code]....
Perhaps I'll go with a box2d equivalent instead of trying out my own physics shenanigans.
I have a simple three ring animation where the three rings fade in and out.On the stage the rings are a perfect circle, in the publish preview they look fine, but once I publish the SWF, all of the sudden the rings are not perfectly round anymore.
They are almost perfect but right at the top and bottom there is just a small portion which has sort of "flattened out"...
I bought a Flash video tutorial online for Animating and the FIRST step is to create a circle with the circle tool, and the guy does it online, and it fills itself in. I repeat his actions exactly and I cannot get the same result at all. I just get a circle.
View 5 RepliesI have two MC's, circular in shape. One of the circles is stationary and you can drag the other. I'm trying to get the moveable circle to be able to move around the circumference of the stationary circle, but not overlap. I'm able to detect when they overlap, not using hittest. I just can't figure out how to code it so that the draggable circle can't be moved over the stationary circle.
View 4 RepliesDoes anyone know of any tutorial or code example that deals with resolving circle-circle collisions including rotation?
View 2 RepliesI have been trying to get this right for hours now it cant be as hard as I am finding it! but basically I have a circle and in that circle is a circle and all I want is for the inner circle to not be able to leave its parent. that's it but I just cant get it to work.
View 1 RepliesIn flex charting you can customize the box which displays datatip information, but is there any easy way of changing the little circle which is displayed next to the datatip box?
http:[url].....
I've found the method positionDataTips() in ChartBase which appears to do the drawing of the circle. I was going to subclass LineChart and override the method with my modified version of it. However, this method needs access to a lot of private instance variables which are only accessible to ChartBase.
I just need a simple code of drawing a text curve in flex
View 2 RepliesI'm trying to figure out how to dynamically place numbers around a circle (similar to a clock face) but dynamically so if the number of numbers around the circle is 5 or 27.. they would space out correctly. I found some code (below) that looked like it might help but I'm having trouble implementing it. I don't know how I actually tie this back to the circle and numbers.
[Code]...
I'd like to make a circle slide ( Slider that on the shape of circle instead of vertical and horizontal Slider) like this one:
[URL]
Is there a ready Component on the web.
I have two circles, an inner circle and an outter circle. I'm trying to find points that reside within the area between the edge of the inner circle and the edge of the outer circle.
View 1 Replies