What I have is a lot of buttons (over 200), and I want to loop through them all. They're all instances of the same graphic symbol in the IDE, so there should be a way to loop through them all.
If I was doing this or something similar in JavaScript, I could do something like: document.getElementsByClassName('MyGraphicSymbol') and then I'd have an array of all the elements. So looking for something like this in AS3.
Does anyone know if it is possinle to scroll a graphic or a movie instance as well as a text instance in flash. I want to scroll text and images as well. Actually text with imges embedded in it.
View 3 RepliesCan a Flash graphic symbol instance be serialized (or equivalent) for use in an XML.send or an XMLSocket.send call?
View 3 RepliesI'm stuck on this annoying bug of Flash:to animate a character i have different graphic symbols of hand positions inside a single container graphic symbol; that way instead of having to swap different symbols while animating and tweening, i just have to change the number on the "single frame" input box on the properties of the symbol.
It worked fine a few sessions ago, but now it won't let me change the frame number if there's a tween before that keyframe; tha keyframe isn't participating on any tween, and may even have some frames between the previous tweening one. The only way it will change is if i remove the first tween or add a blank keyframe between them, wich of course isn't an option when animating... i know it would work if i add a new layer and continue there, but it'll add a lot of mess to the already busy timeline.
The strange thing is that it remains working on some frames, from the previous session, and if a cut and paste them i can change the frame number freely; but if i try to build a secuence from scratch, it won't let me, even on a new document.
I just write text and make it graphic symbol. Then try to put AS on it. But when I click on that to pur the script (v. 3.0), it's says current selection cannot have actions applied to it.
View 2 RepliesI want to make a new instance of an existing symbol (movie clip or graphic) when an object hits the side of the stage. I have the code to figure out if it hit the side of the stage, i just need to know how to make a new instance and make it show up where the ball hit. I also want to be able to have multiple of these instances on screen.
View 5 RepliesI 'm a Flash novice trying to make a wheel graphic rotate a certain number of degrees using Actionscript to loop the animation, and use an if/else statement to check if the rotation is true. I cannot get it to work.
View 11 Repliesif i have several instances of a mc with names such as BR1, BR2... BR10 or whatever, how do i write a for loop that will cycle through them all?
View 3 RepliesIs there a built-in function to loop through each instance of a class (like for each for an array) or must I put them in a container and loop through every child of that container?
View 5 Replieshow could I make a simple loop which loops through the childrens of specific movie clip and add each of them instance name lets say "iname", since I have movie clip in which childrens are not added by code.
And if I'm sure I could acces those childrens then by code like iname.x = 100?
I have a few MCs named fruit1, fruit2, fruit3, all instanced off a MC...I would like to loop to shorten my code and just loop through and stop all of them at once... My Code:
for (var i:Number=1; i<=7;i++){
fruit[i].stop();
}
I get an 1120: Access of undefined property fruit.I want the result of my loop to do:
fruit1.stop();
fruit2.stop();
etc..
I am creating several classes. I am trying to create an instance of the classes in a loop, which isnt going very well.
[Code]...
how could I make a simple loop which loops through the childrens of specific movie clip and add each of them instance name lets say "iname", since I have movie clip in which childrens are not added by code.
P.S.: And if I'm sure I could acces those childrens then by code like iname.x = 100?
I have a movie clip that needs to loop inside a movie clip in Flash. Would someone post the code to paste into the ActionScript window? The .flv has no skin on it. I have done this so that I can put the video file outside of the Flash movie.
View 2 RepliesI have several movie clips labeled thumb0, thumb1, thumb2, etc.
How do I refer to these instance names inside a for loop? I want to do something like:
//DISPLAY THE THUMBNAILSfor(var thumbCount:int = 0; thumbCount < loadedThumbs.length; thumbCount++) { ["thumb" + thumbCount].visible = true;
}
[Code]....
five instances, five different numbers on theText. Five different names for each instance.
Upon the stage of my flash movie, I have several symbols (movie clips) which I need to address dynamically using a loop. The symbols that I want to address all have instance names beginning with the string "lamp_", they then each have a different number concatenated on the end to distinguish between them (e.g. lamp_1, lamp_2, lamp_3.....).
The following noobish effort I have devised is totally useless, and I am hoping someone can show me how I might get this working[code]...
I have 35 textboxes with the names "t1" to "t35". How would I call these names in a for loop? I have tried this with no luck:
[Code]...
I know I'm doing something wrong with the ("t"+i) but I dont know how how to combine a string and number like that.
was trying to get a prototype run from a foreach loop depending on instance name... but i stripped the code. Why wont this work?
[Code]...
1. When I make a symbol, I find the reference point always appear on the upper left corner, is there a way I can change the position of that?(besides use javascript?)
2. When I make a animated graphic Symbol, I drag into scene, it always repeat itself so I have to change the instance property to non-loop. Is there a preference which I can preset all the instance to non-loop?
3. if I make 2 animation character in 2 different flash file, how can I combine the 2 files but still keep the layer and key for each character?
i have a simple matrix form that consist of 3*3 textfields. my problem is how to get the values that the user will enter into it by a loop, i mean not using a long way such:
[Code]...
I am trying to communicate between an instance of flash embedded in a browser and a flash instance running in a C# WinForms app... I am getting a compile error that say:
1119 Access of possibly undefined property printOut through a reference with static type flash.net:LocalConnection
Here is the actionscript:
var feedback = "";
var receiving_lc:LocalConnection = new LocalConnection();
receiving_lc.connect("fromClient")
[code]....
Does creating a new instance of an Object that uses an identical name to an older instance, delete the previous instance? Or should the original instance be deleted first? The code uses a ridiculous amount of XML vars. Isn't it less memory intensive to parse the XML and save the properties to an Object, and then delete the XML Object, rather than keep the XML Object around and reference it's child nodes directly? Is it better form to break up a huge XML file (>600lines/3200vars) into smaller chunks?
View 1 RepliesI have a library object (SomethingMC) which extends a custom class (Something). Something, in turn, extends MovieClip.If adding SomethingMC to the stage within Flash CS3 IDE, is it possible for it's super class (Something) to assign an instance name from a class constant (Something.THE_CONSTANT)?
package
{
import flash.display.MovieClip;[code].....
The above does not work. It throws Error #2078: The name property of a Timeline-placed object cannot be modified. if the instance is assigned a name in the IDE, and it just doesn't work if no name is assigned in the IDE.
I placed a movie clip instance inside a button, and I want this movie clip to play when the button is released. I'm using this code on the frame containing the button:
function playMovie(event:MouseEvent)
{
this.theButton.theMC.gotoAndPlay(3);
[code].....
I am trying to create a gallery where each thumb is housed inside of it's own movie clip that will have more data, but it keeps failing because it won't let me refer to the newly created instance of the movie clip. Below is what I am trying to do.
var xml:XML;
var xmlReq:URLRequest = new URLRequest("xml.xml");
var xmlLoader:URLLoader = new URLLoader();
[code]....
I am trying to create a gallery where each thumb is housed inside of it's own movie clip that will have more data, but it keeps failing because it won't let me refer to the newly created instance of the movie clip. Below is what I am trying to do.
var xml:XML;
var xmlReq:URLRequest = new URLRequest("xml.xml");
var xmlLoader:URLLoader = new URLLoader();
[Code]....
It dies every time on that last line. How do I refer to that vidThumbn instance so I can add the imageLoader? I don't know what I'm missing. It feels like it should work.
make a graphic like this:
when i press the button the graphic go up, if press again go down, always like this.
I imported a panorama .jpg file (i.e., several overlapping landscape photos stitched together) onto the Flash MX 2004 stage, changed it to a symbol (graphic), and used Tween to simulate the panorama panning back and forth. The effect looks great when I click on the .swf file in Windows Explorer, but when I created a box on a PowerPoint 2000 slide and linked the .swf file to it, instead of the graphic, there is a red rectangle. The rectangle moves the way the graphic would, but you cannot see the photograph. By the way, I followed the steps at [URL] to link the .swf file to the PowerPoint slide.
View 1 RepliesI want to know all differents betweent Movie Clip and Graphic & Also I want to know when I use graphic or Movie Clip
View 14 Replies