Flash - Catch And Edit Swf Loads In Remote Swf?
Jul 4, 2011
Since i'm having some issues with a sandbox here, i'm looking for a little workaround that should work to proxify the assets loaded by a remote swf.Currently after loading a remote swf, and trying to draw a bitmap i get the following error: Security sandbox violation: BitmapData.draw: http://urlhere cannot access http://remotehost/clothes/bg/bg_10438411_bg.swf. This may be worked around by calling Security.allowDomain.
Now, i want to see if it's possible to catch & change the swf's that the remote swf loads. So i can load them through a php file and then into the swf instead. Basically editing the URL that it loads the swf from.
View 1 Replies
Similar Posts:
Feb 15, 2011
I have an editable mx:Combobox. I want to catch two events: When a user enters some text, or edits some text.When a user changes the selection (selects an item from the combo box).Is it possible? I have been using change event, but it is fired in both cases and I can't differentiate it. Is there a better way of doing this?
View 1 Replies
Aug 11, 2010
In Flash AS3 i wanna write the single try catch block in order to catch any errors in whole class. For ex, i have a lot of functions in myClass.as. I don'w wanna write in each function try catch blocks in order to catch errors in this function. Is there any methods to do this?
View 2 Replies
Mar 28, 2009
Everything is embedded in an HTML site. The HTML loads a preloader that then loads the actual flash movie. Inside this movie I created a few buttons, inside a scroll bar movie clip. I want the buttons to load a whole new movie inside the same html. The code I'm using in the button is simply:
on(release) {
loadMovie("new_movie.swf", 0);
}
The problem is that it works beautifully in the Flash movie tester but doesn't do anything when tested inside the browser, embedded in the HTML. I think the problem is that the HTML embeds as an object the first movie, the preloader for the menu movie, not the menu movie itself.
View 3 Replies
Aug 11, 2009
I'm actually relatively new to flash and actionscript but I could say I have fair knowledge about them. So anyway, I usually build flash websites the traditional way using timeline animation and scripting. Today I had a job interview and they said they're looking for someone who can develop any web design into a Flash CMS with a back-end office for the client to edit the content without having to edit the FLA file or any code.
Accordingly, I'd like to know where and how to start. What are the main concepts I should follow/adapt?
View 1 Replies
Apr 16, 2010
When I execute the (2nd) below code with a wrong url (number '1' added at the URL end), I get the below error. How can I catch this error, in case the url is wrong, so that I can give out an error message to the user ?
Error opening URL 'http://localhost/myapp/cgi-bin/savePlanScale.ashx1?NoCache%5FRaumplaner=F7CF6A1E%2D7700%2D8E33%2D4B18%2D004114DEB39F&ScaleString=5%2E3&
[Code]....
View 1 Replies
Feb 9, 2010
I am loading a swf into another swf using swfloader, I want to catch all the exceptions thrown by the inner swf, is it doable?
View 2 Replies
Jan 15, 2011
Is it possible to catch a right-click inside of flash (AS3)? No JQuery/JavaScript. I need to pause gameplay when a right-click is caught, so I don't so much want to disable the context-menu as I do just want to tell that a right-click has happened. Is there an EventListener I can add? I need the event to be triggered as they are actually right clicking, not just after the context-menu has disappeared.
View 2 Replies
Feb 12, 2011
why this code doesnt work? With other load [example image] work perfect with sound...no :(
[Code]...
Error #2044: Unhandled IOErrorEvent:. text=Error #2032: Stream Error
View 2 Replies
Jul 1, 2011
I've tried using the haltonfailure="false" and failureproperty="compile.failed" but ant just throws an error when I try to run it: "The <mxmlc> type doesn't support the "haltonfailure" attribute." I need to do a little cleanup before the build script exits if the mxmlc task fails, how do I achieve this?
View 2 Replies
Nov 29, 2011
I have an FLEX application where I need to know if the LIVE stream on FMS exists when I do a NetStream.play();
Example:
var stream = new NetStream(nc);
stream.play("streamnotexists");
How can I pick the error on play how are trying to play a tream that not exists ?
View 2 Replies
May 20, 2011
I need to catch a hover event on top of a flash object, so I set the wmode and created an invisible div on top of it to attach the event listeners to. Thing is, I can't click the flash object. The cover is swallowing the clicks, and the things I've tried to go around this have made a mess of the hover events. This is the 30th problem I ran into in 2 days time and it's driving me crazy xD.
View 1 Replies
Feb 23, 2010
have this flash xml menu that loads external swf files like this:
Code:
<item title="ABOUT"content_path="http://mysite.com/folder1/folder2/folder3/about.swf"target=""mouse_rollover_color="0xFFFFFF" mouse_rollout_color="0xDDDDDD" />
and I have this swf file with cms that I'd like for this menu to load. Currently the swf file load external text using this code:
Code:
if (contenturl1 ne "") {
loadVariablesNum(contenturl1 + "/" + userid + "/content.txt", 0);[code].....
but when the xml menu loads this swf file its structure loads but not its data.I tried using :
Code:
this._lockroot = true;
in the loading swf main time line but it did not work.I should also mention that the dynamic data that loads onto the swf that is to be loaded by the menu, resides not in it main time line but 4 movie clips deep .I don't know if that makes a difference or not.
View 1 Replies
Dec 23, 2008
how can we catch streaming from Shoutcast in Flash?
View 2 Replies
Oct 28, 2009
I'm working on a sample i found on this site:
[URL]
it captures the webcam & saves the image then posts it to a page.
but it seems that i couldn't catch the saved image
i'm capturing the response in a aspx page and save the image in a file. here's my asp.net code:
if (Request.Files.Count == 0)
{
Response.Write("ERROR: No files were uploaded");
return;
[Code].....
View 1 Replies
Jan 15, 2010
I want to catch the close event of the flash movie. What would I do to do something when the flash window is closed?
View 1 Replies
May 20, 2011
When loading certain .swf files into a WebView, a split second after the flash file begins to be displayed, my app closes with a Signal 11 fault. No exception is thrown that I can see. Example LogCat dump here.When loading the same .swf files into the stock Android browser, instead of closing, an error icon is displayed. Touching it opens a pop-up stating: "Adobe Flash; Insufficient Memory". Is there any way to catch the Insufficient Memory error before the SIGSEGV occurs -- preventing the task from being terminated -- as is done by the stock browser?
Note: I'm testing under Android 2.2 with the HTC version of the Flash plugin, but it appears that the same sort of issues occur on other, non-HTC devices. I'm loading the swf file into the WebView directly, using:
webView.loadUrl("http://whatever.com/bla.swf");
(with plugins and JavaScript enabled). It works perfectly in most cases -- only a few files cause problems. I've tried various suggestions for reducing memory (such as clearing the WebView caches) without success.
View 2 Replies
Jan 1, 2009
My first attempt involved using LoadVars and "load", and only calling loadMovie if the file successfully loaded (found the technique somewhere out here). However, I found that the ProcessRequest function in the HttpHandler was getting called twice when the file does exist. Makes sense - once for load, once for loadMovie.Now I'm using MovieClipLoader instead (also found this technique out here). This way does call ProcessRequest only once whether or not the file is found. But my problem is that the onLoadError function is only working when I give it a bad URL. If I give it a good URL that passes a bad filename to the handler, the handler throws an error, but my onLoadError function doesn't seem to recognize that there's a problem - I just get a blank area where the error message should be showing up.Here's the relevant AS2 code:
function CheckFileExists(inFile) {
var mclListener:Object = new Object();
mclListener.onLoadError = function(target_mc:MovieClip, err:String){
[code].....
View 1 Replies
Mar 26, 2011
I'm working on a sample i found on this site:t captures the webcam & saves the image then posts it to a page.but it seems that i couldn't catch the saved image, im kinda rusty on'm capturing the response in a aspx page and save the image in a file. here's my asp.net code:
if (Request.Files.Count == 0)
{
Response.Write("ERROR: No files were uploaded");
[code].....
View 2 Replies
May 7, 2010
When the user presses the mouse, and releases it over a static textfield with selectable text, no MOUSE_UP event is fired - not on the stage and also nowhere else.I experienced this when using a scrollbar class on a movieclip with a nested static textfield.When the user drags the scroll handle and releases the mouse over the textfield, the dragging/scrolling is stuck.To test this, create a new AS3 fla file, place a static textfield somewhere, and put in some text. Make sure the selectable property is checked in the properties panel.Add this script to the timeline:[code]Now test the movie and click the mouse. You will notice that trace('up') will not occur when you release the mouse over the textfield.
View 2 Replies
Aug 24, 2010
I have a slider with arrows on the end to operate/advance it. If you hover over an arrow the slider slides. When you roll off/hover off the arrow the slider stops. The problem is that if you hover off to quickly it still thinks the cursor is over the arrow and it continues to slide. Is there any way to address this?
View 1 Replies
Mar 27, 2010
Is it possible to catch flash label's mouse click event?
mylabel.addEventListener(MouseEvent.CLICK, OnButtonClick);
Does not work
Or can it be done via an extends like
public class MyLabel extends fl.controls.Label {
// how to catch and dispatch mouse event? }
View 3 Replies
Nov 19, 2009
I have this streaming video player with an asyncErrorHandler function which isn't working correctly.In Flash player 10 I get no errors, but in Flash player 9 I'll get a popup window with the error message that shows up in my output window when I test on my local machine.
Error #2044: Unhandled AsyncErrorEvent:. text=Error #2095: flash.net.NetConnection was unable to invoke callback onBWDone. error=ReferenceError: Error #1069: Property onBWDone not found on src.display.VideoClass and there is no default value.
I feel that I have my AsyncErrorEvent setup correctly however, but am unsure as to why I still get a massive error in my output window, here is the popup window and code below:My statusEventHandler function
// ☼ --- Handle Status and Errors
function statusEventHandler(event:NetStatusEvent):void {
trace("connected is: "+ncConnection.connected);
trace("event.info.level: "+event.info.level);
[code]...
View 1 Replies
Dec 21, 2010
This application is for a social network, so use JavaScript will not work.
View 1 Replies
Jan 9, 2012
The only way I have found so far to capture the browser window close event from actionscript/flash is actually to capture the event in javascript, and then use a javascript/flash data passing from the javascript callback.
Something around those lines:
window.onbeforeunload = clean_up;
function clean_up()
{
var flex = document.${application} || window.${application};
[Code].....
View 1 Replies
Jul 22, 2011
I would want to catch click with javascript on a embed flash object on my page. I used wmode="opaque" (tried transparent too) and put a low z-index. I tried catching click on a div, on the object element and on the embed element. On FF (5), all three of them work. On IE (7 & 8), none of them work. Here's my code (I removed some attribute for flash like type or classid) :
[Code]...
View 1 Replies
Dec 12, 2011
I have android 3.2 tablet application that displaying flash inside webView. now I want to catch event when pressing some inner item inside (it does't direct to another url..)
is it possible??
View 1 Replies
Jun 25, 2009
I have an animated logo swf file that loads and runs once on the home page every time the page loads. The logo has been updated to appear in three different colour schemes. I want one scheme to load and when the page is refreshed or revisited, one of the other colour schemes to load in its place. They can appear in any random order, just a different one to the one that played before reloading.Can someone point me to an answer or tell me how to do it? I have found a way in JavaScript but this only works on plain images, not swf files.
View 6 Replies
Aug 19, 2009
I've imported a vector graphic from AI into my stage. When I click on the vector graphic that's been converted to movie clip symbol and drill down to the vector level, as soon as I insert a keyframe in the timeline, I no longer can use an eraser to edit the vector graphic. It automatically move up one level as soon as I insert a keyframe. Does anyone have any idea why I'm getting this behavior? I want to create a hand written effect with this vector grachic.If I draw a vector square on the stage, convert to movie cli, double double click the movie and then I am able to edit or change the vector shap but that's not the case with the imported AI file.
View 2 Replies
Nov 10, 2010
I am new to flash and i have .fla file of flash.i want to edit this file to use it.I want to change the buttons name and their hyperlinks in this fileI want to attach the .fla file with post but i don't know how to do this.
View 3 Replies
