Flash :: Continuous Loop - Keep Getting The (same) Trace Result Outputted Infinitely?
Mar 16, 2012
I'm getting the geolocation data of a viewer and creating a textfield to display this data (city,state). After the data is pulled the text is measured to fit in the textbox and if the length of the city is too long, the text is adjusted in size to fill the textfield. When I trace the end result of the final text size, I keep getting the (same) trace result outputted infinitely.
[Code]...
It worked, but I needed the text box to be made according to what data was pulled from the geolocation xml, so I added it in the geolocation script.
View 1 Replies
Similar Posts:
May 3, 2009
I converted a short (96 frame) animation from QT to FLV format and I'm able to instance this onto the stage. How do you infinitely loop the animation? It executes through one iteration, and then stops.
[Code]...
View 6 Replies
Aug 17, 2005
URL...Can anyone provide me with some code on how to make the scrolling thumbnails loop infinitely? So that when you reach the last picture on the scrollbar, it will loop to the first picture?
View 3 Replies
Jan 29, 2011
I'm a flash newbie and have created a slideshow so that all the photos fade in and fade out. I've done it so they kind of fade into each other. So the timelines on each layer overlap. I want this slideshow running as a continuous loop so I've put a gotoandPlay(1) function at the end of the movie. My problem is the final image (number7) fades out but I don't know how to get it fading into the first photo again. So after the 7th image (the 2 bridesmaids) the movie completely fades out and then starts again. Is there a way I could make the first and last photos fade into each other rather than the last one fading out and starting again. The movie can be viewed here- sorry it takes a little time to get to the last image! [URL].
View 1 Replies
Aug 7, 2009
I have a button within a movieClip. I have an event handler on the main timeline that traces this.name when the button is clicked. I get 'root1' as the trace result. I would like to trace the button name.
View 4 Replies
Aug 31, 2006
we use "document.write" in javascript, similarly i use "trace" in flash. But, what if i want it to get displayed in the swf itself. Will i have to use a "dynamic text box" (if yes, how) like writing " mytxtbox.text= ..." or what else is the way. The point being that the result that gets displyed in the output panel because of trace should come in the 'swf' so that someone using the swf to test would not need my .fla
View 3 Replies
Feb 10, 2010
In Flash/Flex, is it possible to capture the result of 'trace' in code?
So, for example, if one part of the code calls trace("foo"), I'd like to automatically capture the string "foo" and pass it to some other function.
Edit: I'm not interested in trying to use trace instead of a proper logging framework... I want to write a plugin for FlexUnit, so when a test fails it can say something like: "Test blah failed. Here is the output:
Edit 2: I only want to capture the results of trace. Or, in other words, even though my code uses a proper logging framework, I want to handle gracefully code that's still using trace for logging.
View 5 Replies
Jan 20, 2008
why I cannot load the image into the largePicture_MC
Code:
System.useCodepage = true;
stop();
// for easing
[Code]....
View 5 Replies
Dec 1, 2009
I am trying to make a scrolling banner. I have succeeded so far in making it scroll from right to left and it loops. However my problem is this - I need for the looping to start when the graphic is at position X (x being a frame number).
View 3 Replies
Sep 3, 2009
I have an image sequence that plays forward and backward with left and right arrows are clicked. The previous frame button does loop past the first frame, but only moves 1 frame per click..how do I make it a continuous loop of prevFrame? [code]
View 7 Replies
Jun 7, 2011
I need to loop an array that also play the swf to the end beffor it goes to the next array. How whould i do that? if anyone could link me to a page where i can find out or tell me how i did it would be great.
i have this but this dosent work as i wannt:
ActionScript Code:
function onCompletePreloading():void
{
contentContainer.addChild(_swfClipsArr[0]);
[Code]....
insted of having the "addEventListener(MouseEvent.CLICK, setContent);" i need something that counts the current frame and the end frame of that swf is that possible?
View 1 Replies
Feb 6, 2010
Anyone have any clue how to make a Flash movie like this one? [URL] I could script a back button to go to a previous frame but how do I get that smooth looping effect?
View 1 Replies
Dec 18, 2002
I have posted this question recently and I am desperate for a solution. I have a pre-loader which is causing a continuous loop.
On frame 1, I have:
totalK = getBytesTotal()/1000;
loadedK = getBytesLoaded()/1000;
remainingK = totalK-loadedK;
[Code].....
View 1 Replies
Mar 25, 2009
I am making a cloud background continuously loop using actionscript, however the image cuts itself off. I was following the tutorial at: [URL]. I attached a picture of what it looks like. Here's my code(very similar to above websites code)
Code:
animator = createEmptyMovieClip('animator',1);
bg_1 = animator.attachMovie('cloudsMC','bg_1',1);
bg_2 = animator.attachMovie('cloudsMC','bg_2',2);
bg_1._x = -bg_1._width/2;
bg_2._x = bg_2._width/2;
[Code] .....
This code is all in a movieclip named bg_mc. The width of cloudsMC is 1500 px. Why the image cuts off as it scrolls to the left?
View 1 Replies
Apr 29, 2009
i just want to have my music looping forever regardless of the timeline stopping and starting. is this possible?
View 1 Replies
Nov 3, 2010
I was wondering if it was possible to use a for (or for each) loop to trace the properties of an event to the output window. I know I can trace the event in one go, like this:
[Code]...
View 1 Replies
Sep 28, 2009
I have a series of images that merged into one 2400 pixel wide jpg. I want this to loop continuously across the bottom of a website. I have tried using TweenLite and TweenGroup but cannot get that to behave correctly. Is there an Actionscript 3 way to do this? Ultimately this is being added to a Flex site.
View 1 Replies
Dec 30, 2009
i have succesfully managed to encode / create an .FLV file which now plays back in my .swf file. The picture and sound are great when streaming off the web!
how do i command the file to play back in a continous loop? at present it plays and then rewinds back to the begining.
i have investigated some of the .FLV parameters but can't seem to find the control / command i'm looking for.
View 1 Replies
Mar 29, 2006
im after achieving an effect similar to movie credits with text automatically scrolling upwards, im loading the text in via xml and have for example
item one
item two
item three
[code].....
View 1 Replies
Sep 20, 2009
I recently found this thing, Caurina Tweener. And want to substitute Flash own manual Motion tween with this. But I having problem with this:
1. How do I loop / make Caurina Tweener continuous? (AS2)
If I take some code from the example reference
Code:
Tweener.addTween(mymc, {_x:691, time:1, transition:"linear"});
I want it to play continously from the beginning to for example x=691
I couldn't find this in the reference manual.
What I want is to use Caurina Tweener instead of flash own manual Motion tween (where I set a keyframe and a stop keyframe and set motion tween between these frames)
View 5 Replies
May 20, 2011
I have made 30 movieclips for my level selection screen. Then I create a movieclip with the same name using a for loop. With that code I make roll_over function showing a Tooltip. I then want to trace what button is being clicked. My whole code is here: [URL] I want to trace what button is clicked, so I can show it on my tooltip textbox.
View 4 Replies
Dec 16, 2010
I just downloaded Blue Chi's advanced image gallery few days back and converted into grid gallery in AS2. However I am stuck with 2 things:
1) How to make the gallery endlessly scrollable in a efficient way. I used duplication method but the trick used is noticeable when it axis matches with stage mask
2) Also, I am not able to control mouseOver and mouseOut scrolling.
[Code]....
View 0 Replies
May 18, 2011
How can I reorganise the code below so the trace commands output i for each element in the photourls array and not just the last element? In a 6 element array, the trace(i); line outputs 5,5,5,5,5,5 rather than 0,1,2,3,4,5.
[Code]...
View 2 Replies
Jun 25, 2003
posting after a long while, so i thought i'd actually follow the rules for posting,.. I am trying to get this waves thing done, here is the sketch [URL]I am trying to create those antenna waves as in making alpha go to 10% or so in a continuous loop....
View 3 Replies
Mar 14, 2012
Lets say i want to have a communication console for my game user, to communicate to them what is happeiong in terms of their game, particularly, anything that i have traced in my code? is it possible to have these traces output as dynamic text that opens up in another window, adjacent and smaller to the swf that has the game?
View 1 Replies
Feb 14, 2012
I am trying to seamlessly loop specific layers containing .swf or .flv movies infinitely, independent of other layers in the timeline.I have attempted to use the gotoAndPlay("x"); method, but the target layer always freezes on the last frame for about .5 seconds before executing the gotoAndPlay command. The only situation in which it doesn't freeze is when frame "x" is the first frame of the project.No other actionscript is being used anywhere else in this project
View 1 Replies
Mar 9, 2010
I have 20 players in a game and cutting and pasting lots of code except for a few numbers. I have future features that would require over 400 lines of mostly repeated code. So I learned how to use "for", and practiced with a trace command. Traced the results exactly as I thought. However when I apply it to the guts of my function, the movie breaks down. I suspect it's because the function is being called on an EnterFrame command and the for loop I wrote is being executed over and over.
This works when I hand code:
Actionscript Code:
function drill(){GUESS0 = ((guess0min * 60)*1000) + ((guess0seconds * 1000))
GUESS1 = ((guess1min * 60)*1000) + ((guess1seconds * 1000))
GUESS2 = ((guess2min * 60)*1000) + ((guess2seconds * 1000))
GUESS3 = ((guess3min * 60)*1000) + ((guess3seconds * 1000))
GUESS20 = ((guess20min * 60)*1000) + ((guess20seconds * 1000))
//and then 300 more lines of other code}
And then a button later calls this when pressing:
Actionscript Code:
my_MC.onEnterFrame = function(){_root.drill ();
//so _root.drill is continually being called, which is good, because it has all sorts of data that needs to be refreshed, but I think it's screwing with my "for" loop.}
And the following is NOT working.
Actionscript Code:
function drill(){for (i=0;i<20;i++){
"GUESS"+i+" = ((guess"+i+"min * 60)*1000) + ((guess"+i+"seconds * 1000));";}
But when I trace it in a separate test movie, it outputs exactly what I would hope it placed in the code:
Actionscript Code:
for (i=0;i<5;i++){trace("GUESS"+i+" = ((guess"+i+"min * 60)*1000) + ((guess"+i+"seconds * 1000));");}
So at the end of the day, I guess I can trace these results in a test movie and use it to generate what I need, and cut and paste it into the project... but I thought 'for' loops were for saving time AND space. Am I using this code right? Maybe my use of "", or +, or i is misguided?
View 4 Replies
Aug 27, 2011
I've got something simple in my main time line. I know I must be missing some kind of loop function, as the hold down doesn't work unless I keep clicking. And my trace doesn't work unless it starts on the 'enemy'. I'm just not sure what
Code:
import flash.events.MouseEvent;
_left.addEventListener(MouseEvent.MOUSE_DOWN, moveLeft);
function moveLeft(e:MouseEvent){
_hero.x--;
[Code] .....
View 6 Replies
Apr 12, 2011
I want to get some flashVars parameters, but have a hard time getting them into any variable.
When using the following code :
[Code]....
the values are shown inside the SWF as expected. However, when adding a trace in the for loop, nothing is there.
Why is this, and how should I retrieve the variables?
View 6 Replies
Apr 15, 2012
im using PHP with MySQL to send information to my flash file using GETs.Using FlashVars i have managed to get the users 'id' with this i can send my questions/searches to a PHP script which access the database and returns the information to the html page.What i would like to do now is add the information sent back to the html page to a variable inside flash for example:
var usr_name = get_user_name(id) || 'Unknown'; // "Unknown" should just be for offline use.
but this just returns 'Unknown' this is the function used:
public function get_user_name(usr_id){
loadData('search.php',"quest=name",'usr_id='+usr_id);
}[code]......
If i just type the URL into a web browser i get the name outputed.
View 2 Replies
