I have a button on the right side of my screen. When I click it I want a full screen menu system to come in from the right hand side and stay in place until another button is clicked.I have all the parts built, but I don't know how to use buttons properly. The only tutorials I've found are the ones that tell you how to show or hide something, or how to change the appearance of the button.
View 1 RepliesEarlier today my motion preset displayed perfectly.I was able to set motion presets easily.Then later in the day it will not display.I know that I have to first go to Window - select Motion Preset and it should displayI couldn't be missing a step since it was working perfectly all day. How do I get it back?
View 5 Replieshow do i make a button trigger a movie clip that targets specific coords? I'm building a map and when a button is click it goes to a defined point. right now it jumps to the coords, but i'd much rather it smoothly move instead. the other thing is that i would like it to move from whatever point it is currently at.
View 11 RepliesWhat I have done is create a new actionscript 3 document, imported to stage my bitmap then converting it to movie clip, then i just apply the 3d spin motion preset.When i try the movie it spins ok apart from 1 frame where it looks like the bitmap moves to the left slightly.Do I need to delete frame 1 or the last frame perhaps
View 4 RepliesI have added a fly in right to a symbol and I want to add a fly out right after a certain number of frames. I've been through a tutorial on Lynda of the new CS4 tweening, but what I cannot figure out is how to add the second motion to the new motion tween. When I try to select the last frame or add a new keyframe past the last frame, Flash asks me if I want to replace the existing tween. I can't figure out how, like in classic tweening, to add a fade out, e.g., to the existing item after so many frames.
View 5 RepliesI created a custom Motion Preset, and saved the corresponding swf file to .../adobe/adobe flash cs4/Common/Motion Presets. When I looked for the xml file, nothing. The preset does show within the Motion Preset Panel under Custom, but no preview. I also search for the xml within the .../en/Motion Preset directory as well.re this preset file may be hiding. I'm on a PC and all applications located within my Program Files directory.
View 6 RepliesI created a motion preset of a 3D text animation that made the text swing back and forth like a gate with the hinge on the far left side. However, when I apply the motion preset to other text, the text moves to a new location and the text swings closer to the center than the far left side. Moving the text only creates a travel path that further complicates matters.
what am I doing wrong with the motion preset? How can I save something into a preset and apply it to other things and have the animation work the way it was designed?
I'm trying to do something that seems simple, but I've been looking all over for the right information and I can't seem to find it.I've got an input text field and various movieclips. On the click of a button or hitting "enter", i am able to trace what is typed into the input text field.I want certain inputted numbers to trigger movie clip events (gotoAndStop, etc).
View 2 RepliesI spend 3 days on searching how to make a simple PosterFrame to a Flash Video in AS 2.0. I managed to find some tutorials but not the way I want it. I found the perfect one for AS 3.0. On "Adding a Poster Frame to Flash Video" But i want the actionscript for AS 2.0?! So i didn't made a custom player, I imported a movie into my library and it's ready yo play
View 1 Repliesneed to have a movie text containing a dynamically loaded single line text box to move back and forth like a ticker tape. The text box will change content depending which button is pressed, so the length will always change. The effect is something like in the winamp display screen where the text scrolls back and forth depending on the length of the file name.I can get everything to scroll one way or another but I can't seem to get it to switch directions when it reaches a certain _X position. I've used if statements to set a variable when the _x position reaches a certain point, nested loops, everything I can think of.These are two versions of the loops I've used to move the clip. I've tried this in a clipEvent and as a function.
do{
this._x ++;
}while(this._x>300)
[code].....
i created a flash button in dreamweaver (one of those preset flash buttons you found in dreamweaver).. and i want to know how to make a drop down menu for that preset flash button?
View 1 RepliesIn flash cs4, i've created motion tweens on 4 separate layers with 4 different movie clip symbols that were created with the pen tool. it seems to be fine when i scrub the playhead, but when i test the movie, 2 of the movie clip graphics distort, and the bottom halves of them move faster than the top halves.
View 2 RepliesI need to move a movie clip with action script. I am writing action script to one of the layers and calling my movie clip "bird". I want to move the clip in a wave motion(like a sine wave). I am using the bird._x and bird._y and setting them equal to a variable. But the _y part of it is not moving. The movie clip is only moving from right to left and there is no upward or downward movement.
View 2 RepliesI have 10 objects in 10 layers to make a single logo. I have created them using flash drawing objects. Now I would like each object to come one by one on stage using motion tween. How can I go further? Do I need to make each object a movie clip before set it motion tween? Or do I need to make a single movie with all 10 objects as combined? Please note that I need each object to come on stage one by one (not a whole logo on once). Please provide help or any example tutorial link.
View 3 RepliesI've been going over several tutorials and whatnot and I'm confused on the point of movie clip symbols and motion tweens. To me using the other tweens and symbols are "easier". Can someone explain to me why they're so beneficial to have been added to CS4/CS5? Except I understand that movie clip symbols can be adjusted using the 3D tools but is that the only difference?
View 1 RepliesI'm having a problem getting a movie clip to Motion Tween from a positive value to a negative value. I have two movie/buttons on my stage. When you click one the other movie Tweens from a y value of 0 to a y value of 400. That works fine. However, when you click the other button, the movie clip should then Tween from a y value of 400 back to a y value of 0. I cannot get this reverse tween to work.
Code:
// code for positive tween
function movePeople(event:MouseEvent):void {
movePlacesTween = new Tween(pageloaderB, "y", Strong.easeOut, 0, 400, 0.5, true);
}
[Code].....
The second tween never reverses. It just stays in place.
I've also tried the same tweens using the y value of pageloaderB... so tweening from pageloaderB.y to pageloaderB.y+400, which works, but the reverse does not -- pageloaderB.y+400 to pageloaderB.y.
why the reverse tween is not functioning?
I am trying to get a movie clip to pause when the cursor rolls over it, and then make a darkened out area visible and have some text appear. I have succeed in doing so, but it looks funny. What I would like to do now, is once the cursor rolls over the movie clip it will finish the movie clips motion and then pause on a certain frame or frame label.
[Code]....
how to apply a rotational motion blur to a movie clip using the Tween Class and Blur Filter? I have found info on bluring an animation this way, but only via the x or the y axis, not the rotaion.
View 1 RepliesDoes anyone know whether it would be possible to set a motion path for a movie clip and to have the speed of the tween set as a variable which can be increased or decreased by the user during the movie?
View 3 RepliesI have created a flash website, each button is a movie clip with an invisible button over it containing the following script
on (rollOver) {
_root.mouse_over_profile_btn = true;
}
on (rollOut) {
[Code]....
each page is also a movie clip and on release of a button its played. the problem is that when i press another button to play another movie clip 'page' the old content is still there.
Is there a way of reversing the page transition i have used to bring out the movie clip and then bring in the next movie clip.
What action script would i need to make a button in one movie clip goto and play a frame in another movie clip? Im not very good at flash but i've been trying my usual codes but it dont work..
View 2 Repliesive got a slider menu which opens when clicked. however the buttons (also mc instanced) inside the slider mc wont work... here is the code:
[Code]....
the slider mc works however i cant seem to get the 'web_MC' to respond..
I am trying to make a menu that has a "slider" arrow at the top that points to the current button that you clicked. Right now I just have it so that if you click a button it changes the x position of the arrow movie clip to go over a certain button. I would like to create the effect where it moves slower to the different buttons and then it "springs" back and forth over the button getting closer and closer until it finally stops.
I have tried using some formulas that I found on the web, but I can't get the button to control the motion of the movie.[URL]
I'm just trying to find the right action scrip for instance on my button to control the movie clip it is within.I have currently tried..
on (press) {
mc_lexisnexis_main.gotoAndPlay(2);
}
[code].....
I am trying to move a movie clip containing content via AS3 tween with a button outside of the movie clip. I have achieved this effect on another project by using the following code:
Actionscript Code:
var myxTween:Tween=new Tween(content_mc,"x",Regular.easeOut,content_mc.x,theXPosition,.8,true);
I set up a moveContent funtion using that tween, then used:
Actionscript Code:
content_mc.aboutBtn.addEventListener(MouseEvent.CLICK, aboutClick);function aboutClick(e:MouseEvent):void { trace("aboutClick");current_btn=e.currentTarget.name; moveContent(588,-538,"about.swf");}
to move the content. I am just wondering how to achieve the same effect but use a button on a separate layer that will be static.
I'm trying to create a movie clip on my my main timeline that has a movie clip button within it that pops up a box in the middle of the site that contains text and links. On Frame 1 I have the Up state, frame 2 the roll over state, and frame 3 my Down State (where Box appears).
[Code]...
The problem is that on the main time line, the button is clickable but doesnt do anything
I am trying to target a movie clip within a movie clip.
I have a movie clip on the main stage with an instance name of a
I have the following action script on it
on (release) {_root.a.gotoAndStop(2);
}
So on frame 2 of a I have a button (instance name b) which also has two frames and a stop action on frame 1. All I want to do is click on the button and make it go to frame 2. It should work but it isn't Here is the actionscript on the button (b) on (press) {_root.a.b.gotoAndPlay(2); }
I want to put a button on a movie clip that is inside a movie clip. The button needs to access a "label" on the parent movie clip.
View 5 Replieshow can i get a MC button that is inside another MC to carry out its functions
the mc button is using TweenMax for its roll-ON roll-Off effect and that works as normal when i test main movie
but the button itself dont function when pressed still mouse roll-On roll-Off effect works but not the movie clip button it this to do with it been nested inside another mc or is it the code am using below
web.onRelease = function(){
gotoAndStop,(49);
}
web is just the name of the nested movie clip button i was saying
I'm creating a game where certain movie clips execute a motion tween when a button is clicked, and stay still when not clicked. I know that this sequence would probably use coding such as if...button pressed execute movie clip/else...
But I'm not sure how to code it. Also is it better to have the motion tweens as a nested animation in each movie clip, or should I just create the tweens on the main stage. And if I make them nexted animations how do you say in a function to play the nested animation?