I have a digital magazine (pageflip) on my site and i want to play video in each page. my problem is when user want to see the magazine he need to wait untill all the movies preloading.. Im trying to stop FLV from preloading untill the user click on play button or go to other page on our magazine (pageflip). can someone know how to do it? this is the code im using for the FLV video
[Code]....
I am duplicating movie clips on the stage using a for loop. Inside the for loop is a loadMovie() function that loads a jpg inside each newly duplicated clip. My question is how do I pause the for loop until the image is done loading, then move on to the next.The way it is right now appears to be doing it all at once and it's obviously pretty choppy.
View 7 RepliesI have a site at www.asylumartists.com , and when you enter the site, it says its loading 23 files. Inside my site swf there is around 12 videos on the main timeline, and each of them are flv components. Also my external swf files are being preloaded with:[code]If you go to the work section and check out a work, it doesn't start to preload right away. This leads me to believe that the content is having trouble starting because its trying to load so many files. Does anyone know a code that stops all loading at a certain frame? Once my site loads, it just stops all cache entrees, and when you select a work it preloads as it should?
View 1 RepliesI have 4 imgs in an array with four buttons that will load one of the imgs from the array. If I do a simulated test to see how the preloader is working everything works. I can see my preloader working the percent is shown in the output window.
Here is my problem:
If I click on a new button while an img is loading the preloader flips out.
The percentage in the output window passes 100%. The preloader loads the new img and the img that was being loaded.[code]...
I have an as2 slideshow project that has 3 images that are accessed form the library. The movie consists of 3 frames 1) preloader 2) blank 3) slideshow script and some stage elements. All these images have been exported for AS and exported for frame 3.
Even so the preloader in frame 1 still only flashes up on the screen briefly before the slideshow starts. I have also set the flash publishing to "export frame for classes: 3" as I have read that this may help. This still does not help.
The SWF file is around 1.3MB in size and virtually all of this is being loaded prior to the preloader as the bandwidth profiler reports.
I have attached a link to the CS3 fla file in zipped format so you may test this for yourselves and possibly help me figure out what I am doing wrong.
[URL]
I thought I had a handle on the timer class (even just a beginners understanding), but I'm having trouble with it.I have an event listener for the timer and it starts fine i get a delay, then a tween,but when I place a myTimer.stop();in the fuction the listener called (to stop it) it dosent stop.it will repeat placing the first image, and then call the first function again
......Wait its placing the first image in (a couple of lines before the start), so Its restarting the whole movie, not just the function?
myTimer.addEventListener(TimerEvent.TIMER, tweenone)
myTimer.start();
function tweenone (event:Event):void[code]...........
I have a contact form for which I have a tween. That contact form consists of two keyframes, first the form, I tried putting the code stop(); in the first keyframe but it didn't stop. I then changed stop(); to _root.stop();, which didn't work either. I have to stop it because otherwise users would see a thank you note before they even enter their details. What can I do? Converting to movieclip didn't work either, besides it puts a funny character when I press AltGr
View 2 RepliesI just got Flash CS3. I'm trying to get my main timeline to stop in the begining, on button press to play and at the end stop again. In AS2, you would just put stop(); on the first keyframe and stop(); on the last key frame and program your buttons accordingly.
The stop(); does not work!!!! It's driving me crazy. What am I missing? I've gone through the tutorials in Flash and they don't work either.Also, if you have MovieClip that contains an animation and you don't want the movie clip to be on a continuous loop how do you stop it from playing. In AS2, I would put a stop(); on the last keyframe of the movieclip's animation. This also does not work in AS3.
How do I stop a class file from automatically inserting itself into the .fla file. I want to insert it manually into a frame, and then tell it to stop after I leave the frame.The following is the code included in my .as file.
ActionScript Code:
package {
import flash.display.*;
import flash.events.*;[code].........
Im attempting to make a preloader. I am very new to action script so this is what i have.
Code:
ifFrameLoaded ( "UC" ) {
gotoAndPlay ( "home" );
}
as simple as it gets, right? Wrong, the preloader works however is get this error 1087: Syntax error: extra characters found after end of program. The preloader it self works it plays and when the movie is loaded it begins the movie, however the movie doesnt stop at any of my stop commands and keeps looping through itself over and over again till i exit the window.
I've tried a couple dozen things to try and stop this movie clip, even down to the bare bones basics and its not working.I have an imported TIFF sequence that i imported onto the stage of a movie clip. Its 73 frames long, i want it to stop on frame 73.So i add the usual stop(); command but it doesn't stop, it keeps looping.On the main layer i put this movieclip in i have an AS layer that also has stop(); and moviclip.stop();But it doesn't stop at all. it just keeps repeating.I put it down to this bare basic setup just to see if i could even stop it. But its not stopping.Layers -> and stuffScene 1Content - movieclipMCActionScript - stop(); movieclipMC.stop();Movieclip - keyframes consisting of image sequence 1-73. frame 73 has stop();
View 1 RepliesI have some bombs like this :
var sjunkBomb:Array = new Array;
for (var i:int = 0; i < sjunkBombMaxAntal; i++) {
var bomb = new sjunkbomb;[code]....
Each movieclip sjunkBomb contains an animated movieclip. When the bombs reach the bottom I want to stop the inside animation.I guess it's better to stop them so they affect the rest of the game if there are a lot of bombs. I know how to hide them with sjunkBomb[x] .visible = false; but if I want to stop them? sjunkBomb[x].stop(); doesn't work!?
I have a movieclip that I want to be scaled to 400.After that I don�t want it to scale anymore.How can I stop it going back to it�s original value and scale again and again.I have the as in "On enter frame",I dont want a button to be pressed to start scaling.
View 6 Repliesi have programed a play button using:
[Code]...
now i am trying to program the stop button to allow the user to stop mid song....
my reverse button causes the timeline to ignore the stop() function on its keyframe and play backwards all the way to the start. Since it keeps trying to play the previous frame, it's frozen at frame 1.
Code:
stop()
// Reverse button //
var reverse:Boolean;
rev_btn.addEventListener( MouseEvent.MOUSE_DOWN, down );
[Code].....
I'm making a website using flash,And on my movie it says Welcome to Blah Blah Blah,And then a button appears, To make sure my button works,The writing turns to bold and goes bigger,When the button appears it works and goes bigger, Until it reaches the point in the timeline where it has stop();It stops my movie from looping or restarting which is what i want, But it stops my buttons from working aswell, How to keep my button working but movie stops,If you want me to explain more just ask
View 1 RepliesWhen my animations are playing in the flashplayer and you rightclick and uncheck the play command only the animations in the main timeline stop playing. All the child animations continue to play. How do I make it so they all will stop playing when play is unchecked?
Is there a event listener that monitors if the movie has been stopped?
On a recent project I am working on, I created an event-based sound engine. Different components within Flex will be registered, and then the controller will listen to events and handle the information correctly. So, it just takes a custom SoundEvent or ChannelEvent to alter one of the channels, or play a sound.
I can not quite figure out what is wrong with my code, and I am finding myself snow-blind to the issue at hand. At first, I was going to rewrite it but I figured it would be better to learn from my mistake. Also, I realize that this is not correct for streaming sounds, but I am working off a local sound library until I get it up and running smoothly.
Here is the code for the SoundEvent:
package code.events
{
import flash.events.Event;
public class SoundEvent extends Event
[code]....
i have mp3 player that i've written now i load that swf file into my new project bu i can't stop it when i go to another menu
could i write SoundChannel.stop and stop all channels?
Is it possible to play and stop a number of frames later, without using stop() in the frames? Like when I click a button frame 20 will start playing and it stops 30 frames later, all defined by the actions of the button..
View 3 RepliesIs it possible to play and stop a number of frames later, without using stop() in the frames? Like when I click a button frame 20 will start playing and it stops 30 frames later, all defined by the actions of the button.
View 3 RepliesI have a MC that follows the mouse. I want to do so the MC will smoothly/softly stop when i stop moving the mouse. Is it hard to code, And it would be very nice if someone could do some code for it
View 2 Repliesi have my portfolio website which is a 1.5mb big flash presentation and i thought about making a preloader.the problem is that making a preloader for the entire site will take too long to load. i have tried that.
so i thought about making a preloader for each "page" or section of my presentation. for example- just for syneron, or just for m-systems (with each of them have a few diferent pages in the presentation, but their size is managable).
the problem is that i cant find anything is the preloader code that will let met control what frames to preload (for example, frames 100-200).
I've made preloaders before, but only by having a preloader.swf that loads the content.swf.Is it possible to have an swf preload itself, so to say?I suppose the swf doesn't start until it is read into memory completely, or am I wrong?
View 1 RepliesI have a preloader that loads an external swf. That external swf calls an xml file that takes a few seconds to process and load the images within the xml.
My issue is that the preloader is "lying" to me when it reaches 100% because once it loads the external swf there is still a few second delay before the images within the external swf display.
Logically that makes scene to me because the external swf bytes don't include the bytes of the images that it calls for.
SO,...
How do I get the preloader to count to 100% only when the entire external swf and all of its contents are loaded in?
I need both the XML and SWF to be fully loaded and available. The problem I have at the moment is that the swf loads and after a slight delay the xml content appears (this is more noticeable at lower bandwidths).I need for both to appear at the sametime. Is there a way of constructing a preloader that takes both swf and xml bytes together ie getBytesTotal for both swf and xml.
View 1 RepliesWhile the main movie is already visible and usable, I want to load some additional SWF's (not to large though, like 20-50kb) underwater... so not visible and they won't be appearing to people unless they click a certain button. It is not certain that people will actually go to view them, but I want to make sure that some parts are immediately visible (so already loaded), in cache so to speak.
View 11 RepliesI have an FLV embedded in a SWF, and it preloads whenever a user visits the page it's on. Is there a way to prevent it from preloading, or force a user to click play before it loads?
View 2 Repliesi have my portfolio website which is a 1.5mb big flash presentation and i thought about making a preloader. the problem is that making a preloader for the entire site will take too long to load. i have tried that. so i thought about making a preloader for each "page" or section of my presentation. for example- just for syneron, or just for m-systems (with each of them have a few different pages in the presentation, but their size is manageable).
the problem is that i cant find anything is the preloader code that will let met control what frames to preload (for example, frames 100-200).
I am currently building a flash site which uses dynamic images throughout using loadMovie("picture.jpg", mc_name) to load them into various movie clips. This all works fine and the site is starting to look good, the only problem i have is with preloading. I have the main swf file and everything contained within it preloading with a progress bar at the start which works fine. When the movie loads the main homepage image slowly fades in, however as the loadMovie("home.jpg", homepic) is on the same frame as the homepage, if you don't have the image in your cache then you miss the fade completely in the time it takes the image to load.
As a result i am wanting to preload this (and a few other) images during the initial preloader if possible, that way i can prevent this problem from occurring. Unfortunately from what i understand i can't run loadMovie from within my preloader actions as they're in a different frame so i'm really not sure how to do it, given the image is external
