I have a function which is meant to check a variable called basetemp against a variable called newtemp and, if they are not the same, change basetemp until they are. It does this in increments of 0.1, and neither value ever adds or subtracts fractions smaller than that.The code responsible for this function looks like this:
Code:
this.onEnterFrame = function(){
if(counter < 1){
[code]....
I have uploaded an .swf file to my site but when I embed it into my site page it won't play all the way through, it just freezes about half way. But the same .swf file will play fine in Flash.. I am using a content management system called Teamsite.
This file is not especially large only 377KB, I have tried removing images to reduce the size down to 96KB and it will still freeze. The file is just rotating images and uses no fancy effects just a simple fade.
create a function that picks out X amount of numbers from a set of numbers? So if X=3, then i need this function to pick out 3 different numbers from say a set of numbers (1, 2, 3, 4, 5, 6, 7, 8) and then stored it into X number of variables.
In saying that, X will only =2, and =5. So in the first instance, i'll need 2 random numbers from the set above that are not the same numbers, and second instance 5 random numbers from the set above (also no repeats of numbers). Then i need to be able to store those 2 or 5 different random numbers from the set into variables to call them with other functions.
I am using about 24 different sound clips (mp3 files) in my flash piece, all loaded using the attachSound() method. The problem I am having is that the volume of the sound output (its all voiceover) can vary by about 10-25%, even for the same clip. I will play one sound, then the next one loads and it blasts through the speakers. The next sound will load and it is not as loud. I can go back to the sound that blasted and it seems to be back to normal.
View 2 RepliesI have a function that has a site pop up when the user clicks on a button. This works well except it goes until the frame that has the command stop(). Is there any way to have this function continue on, even when that frame says stop? Or is there a different command besides stop that allows this function to work up to and including that frame?
The stop() command is on frame 90.
I tried gotoAndPlay(88) and it gives the user the mouse hand, but nothing pops up.
I have a function and a movieclip prototype. When the prototype applies an onEnterFrame to an mc, it repeatedly calls the function (hitTests for all other mcs). Besides this, it also eases the mc to a new point. However, when the mc have reached this point, the function handling the hitTests stops being called
PHP Code:
//Prototype....MovieClip.prototype.moveSprite function(speed, spriteType) // Generate random coordinates var tarX = Math.round(Math.random()*(400-
[code]....
I have a function and a movieclip prototype. When the prototype applies an onEnterFrame to an mc, it repeatedly calls the function (hitTests for all other mcs). Besides this, it also eases the mc to a new point. However, when the mc have reached this point, the function handling the hitTests stops being called.
PHP Code:
// Prototype....MovieClip.prototype.moveSprite = function(speed, spriteType) { // Generate random coordinates var tarX = Math.round(Math.random()*(400-this._width/2)+this._width/2); var tarY = Math.round(Math.random()*(300-this._width
[code]....
The function should trace "carn" over and over and over, but instead, it traces "carn" over and over until the prototype picks a new point to ease to.
I have this preloader code that should not play frame 3 until it is all loaded, but for some reason while my prelaoder bar is showing progess, frame 3 is already loaded.
[Code]...
I made a flash site and one of the pages has drag and drop functions with drop target actions, so that text appears once dropped onto a target.It works fine but when I have it loaded inside an external editor, the drop and drag still works but the drop target function stops working.
View 0 RepliesI have a movieclip with the instance name information_mc. I am trying to get this movieclip to move up and down, depending on its y co-ord or in what direction it is tweening at the moment it is clicked.I have the following AS:
Code:
information_mc._y = 240;
var curMovement:String = "goingup";
[code]......
I have a movieclip that has selectable text / scroll bar / other buttons etc - What I would like is to have an onRollOver / RollOut event to call a function on the entire movieclip, however when I do this - The entire movieclip is treated as a button and I cannot select the text nor click the scroll bar / other movieclip buttons within this movieclip. Is there a way to set the onrollover / rollout to execute a function without having the movieclip itself turn into a button / stop functioning?
View 2 Repliesi'm attempting to draw lines beside each other, but the last line from the first color group takes on the color from the second color group before the second color is assigned.
[Code]...
My application has a tree with a custom item renderer, which depending on the type of data at a leaf uses different components as editors. In one case I am trying to use a datagrid so that the user can choose a row that meets his needs (several columns need to be displayed), ie. similar in concept to a ComboBox.To do this I have a function assigned to be the handler for 'itemEditBegin' (for the tree) in which I'm dynamically creating the datagrid, and then using the popup manager to display it as a (modal) popup. So far so good.
However, if you click anywhere (eg. scroll down button in the datagrid) the popup disappears because the itemEditEnd event is fired - why ?In another scenario, I have a DateField setup as the editor, and the user can click on the icon to bring up a DateChooser, scroll through the months, etc. I looked at the code behind this, and it is using a popup, seemingly in exactly the same way as my code !Here is the 'itemEditBegin' code:
dataGrid = new DataGrid();
dataGrid.dataProvider = mddTable.dataCollection;
dataGrid.editable = false;
[code]......
I'm using swfupload to upload files to nginx. It works fine for me & 99% of our users.For a couple of users, however, it fails somehow during upload. It opens a connection, but seems to close it before it's complete - nginx reports a 499 status in its access log, which is NGX_ HTTP_ CLIENT_CLOSED_REQUEST.I managed to get hold of one of those users to get some more information. They're running Flash 10.0.42, on XP with Firefox 3.5.7.Has anyone seen anything like this? Any suggestions on fixing it / how I might investigate further?
View 3 RepliesWe're putting together one of those "greeting spokesperson" videos for our website. The video is about 30 seconds long, and on the first load, it always disappears in the middle of a sentence. Refresh the page, and it works fine thereafter. The video plays through a FLV Player inside a SWF. The SWF is 695 frames long and has the following characteristics: 'fade-out' alpha tween starting at Frame 685A Stop action at the very last frameThe following code on the FLV player:
on (complete) {
getURL('javascript:removeIt();'); }
if the title of this post is misleading.I have a slider that outputs a number from 0 to 10 which is backwards from what i need. so when its 0 i need it to be 10. when its 1 i need it to be 9. when its 8,2. ect is there a function in as3 for converting these numbers?
View 2 Repliesi have been trying to write a multi player bingo game, i have got passed all problems, except 1, the random function, the random function works fine with 1 player but when i play the game with more than one user each user will get different numbers and not the same numbers. how would i do it so all users get the same number is there a way where i can shuffle 90 numbers then load them into a movie clip then all users play the movie clip then all users get the same number is this possible or is there a simple way. I have also tried getting random numbers from php mysql but get the same problem,
View 6 RepliesI am generating random numbers between 1 and 90 how do I do it so I don't get any repeats. Here is the code I am using.
ActionScript Code:
var num:Number = Math.ceil(Math.random()*90);
I have 40 frames that I want the player/user to go through. The 40 frames shoud be shown in a random order and no frame shown more than once.
How do I go about making the random function discard frame numbers already picked?
I want my event listener function to throw out unique random numbers between 1 and 30. How does one do that in as3? Math.round will repeat values.?
View 2 RepliesI have a function that states when movieclip1 is dragged and hits a line then it stops the drag, however it seems to stop the entire drag function in the swf on the other movieclips even though they arent called in the function.[code]
View 1 Repliesim trying to do is have a button that shows an animation (created by a duplicateMovieClip function) with onRollOver and stops the animation with onRollOut. It works when i roll over and it stops when i roll out, but then it continues in a loop up to the point where i rolled out (instead of cutting off completely as i would like). Id be extremely grateful if you could tell me where im going wrong.
View 2 Replieshow to do this and not found much, so here goes:
I want to generate a variable number of random numbers less than 16 with no duplicate numbers
Ive posted the fla, and what i'm doing is generating a random number and putting it into an array then using a for loop to cycle through the array for each new random number to check if its already there. if it is, then i want to regenerate that number.
if you test the fla you'll see that all i get in my array is some lovely zero's and i sort of know why this is, but don't know how to stop it.
I am trying to convert a string having numbers to an integer.
//15 9's are there
var str:String="999999999999999"
var res:Number = new Number(str);
But it is not able to convert correctly as the the var res now has the value 100000000000000000. I know that the number has 52 bits of memory, then why is it not able to do the conversion?
Generate four random numbers with the total of the four numbers equal to100?[code]...
View 8 Replieswhat is the syntax to pick how can i pick 6 random numbers from 49 numbers
View 9 RepliesI am generating random numbers between two numbers by the code bellow:
ActionScript Code:
public function randomRange(max:Number, min:Number = 0):Number
{
return Math.round(Math.random() * (1+max - min) + min);
}
trace(randomRange(3,-31));
But I need a code which will return some times '3' and some times '-31'. Not the number between them.
I have been using Actionscript 3.0 in Adobe Flash Builder for a few weeks,and I really like it! Bare with me because I'm not really good at it, yet. Anyway, I was wondering how would I go by adding up odd numbers from an array of numbers? I know how to make all of the numbers add up, but adding only the odd numbers I'm not so sure how to do it.
View 5 RepliesEverything seems to be a string right now & that kinda ruins the whole xml as an internal data structure thing, I don't need a big tree of string I need typed data :-/ Are there any changes I can make to either my XML files or my AS3 code that will force it to cast ints as ints and Numbers as Numbers? Or maybe some kind of type schema I can impose? Not really worked with XML til recently so chances are I'm just ignorant of the canonical way to deal with this...
View 4 RepliesI have a problem with my input text fieldsI to type numbers with commas like "2,5" but flash only allows me to type numbers with dots, like "2.5"
In Sweden where I live we only use commas on numbers.
Now I have some input textfields that I must change so they work with commas instead of dots.