Flash :: .swf File Stops Playing (ends Prematurely)
Sep 30, 2008
I have uploaded an .swf file to my site but when I embed it into my site page it won't play all the way through, it just freezes about half way. But the same .swf file will play fine in Flash.. I am using a content management system called Teamsite.
This file is not especially large only 377KB, I have tried removing images to reduce the size down to 96KB and it will still freeze. The file is just rotating images and uses no fancy effects just a simple fade.
View 2 Replies
Similar Posts:
Jun 15, 2011
What I want is to play a swf file in my site. And when that swf animation file ends that is fully watched by the User, I want to call a PHP page.
View 1 Replies
Aug 16, 2010
I have a function which is meant to check a variable called basetemp against a variable called newtemp and, if they are not the same, change basetemp until they are. It does this in increments of 0.1, and neither value ever adds or subtracts fractions smaller than that.The code responsible for this function looks like this:
Code:
this.onEnterFrame = function(){
if(counter < 1){
[code]....
View 5 Replies
Aug 31, 2009
I have some animation (programmatic, I'm NOT using keyframed animation in timeline), and some music I want to play in the background. Once the music file reaches the end (about 30 seconds long), I want to trigger the end of the animation functions.I figure I could either use an actionscript timer to trigger the end of the animation or a keyframe with actionscript that is placed on the timeline near the end of the song but these methods assume knowledge about the duration of the wave file. If I changed the framerate or updated the external wave file, these triggers would possibly no longer sync upIs there some sort of event listener or other detection method for an audio file to signal it has finished playing? Or maybe there is a way to get the duration of the audio file to use in the timer
View 3 Replies
Aug 7, 2009
I am loading an external SWF file into my main timeline. The external SWF file contains an FLV video. At a certain point in my main timeline, the SWF file loads and plays the video. Is there a way to say...
If the VIDEO (FLV) is done playing, gotoAndPlay(X)?
View 4 Replies
Jan 14, 2011
I've noticed (a few months ago, actually) that in most browsers I use to test my application (Firefox, chrome and explorer) the flash plug in, while playing it's content, will stop, or freeze, when the actual plug in playback window is out of the window (due to scrolling, or switching tabs), or covered by another window (a different browser or program window that will cover the visible area of the player), which is something good, and nice, when you think about web pages full of commercials slowing down your browser and computer in general, but what happens when you a games programmer, who work with multiplayer games, on games which are mostly turn based? If one of my players switches tabs, open a new window over the browser, or god forbids, scroll down the page, the game is essentially stopped, since no events occur on that players side of the game!! And this does not effect just simple frame based animation, but everything, onEnterFrame events stop, setInterval stops... the only thing that I could find that does not stop when this happens is a setInterval action done in a different swf, which is loaded to a different level of my game file.
View 3 Replies
Dec 2, 2009
I have a MovieClip that consists of multiple layers, one of those layers is an animated background Shape. let's call this MyMovieClip with the background shape have the instance name "mcBackground";
I'm adding the MovieClip to the stage from ActionScript by:
var myMovieClip = new MyMovieClip();
addChild(myMovieClip);
This works fine and when the movie clip is added to the stage it plays as expected (background is moving).
The problem is when I try to apply a colorTransform to the background shape, it stops from moving. what I'm doing is this inside the MyMovieClip class:
[Code]...
View 2 Replies
Jan 13, 2010
Can I edit it if I buy the application?I would like to know how i can gain control of this file type.
View 1 Replies
Jan 24, 2011
I have a friend who's stuck in an old-school splash setup: He's trying to insert an AS2 script that goes to a URL when an external FLV stops playing... It's not working. He's in CS5 � I can test out in CS4
View 1 Replies
Jul 6, 2009
I have a FLV player that stops playing right before the end of the video.
View 1 Replies
Mar 28, 2012
i have an equalizer .when i press crt+enter the music equalizer and the song starts playing. I want the following :-
(i) when i click on the playing equalizer it stops
(ii) when i click on the stop equalizer it resumes playing.
Here is my as code
var _sound :Sound = null;
var _soundChannel :SoundChannel = null;[code]....
View 1 Replies
Jan 22, 2010
I'm using swfupload to upload files to nginx. It works fine for me & 99% of our users.For a couple of users, however, it fails somehow during upload. It opens a connection, but seems to close it before it's complete - nginx reports a 499 status in its access log, which is NGX_ HTTP_ CLIENT_CLOSED_REQUEST.I managed to get hold of one of those users to get some more information. They're running Flash 10.0.42, on XP with Firefox 3.5.7.Has anyone seen anything like this? Any suggestions on fixing it / how I might investigate further?
View 3 Replies
Mar 22, 2011
We're putting together one of those "greeting spokesperson" videos for our website. The video is about 30 seconds long, and on the first load, it always disappears in the middle of a sentence. Refresh the page, and it works fine thereafter. The video plays through a FLV Player inside a SWF. The SWF is 695 frames long and has the following characteristics: 'fade-out' alpha tween starting at Frame 685A Stop action at the very last frameThe following code on the FLV player:
on (complete) {
getURL('javascript:removeIt();'); }
View 1 Replies
Sep 23, 2009
I created an FLV of my movie and am using the Slideshowpro for flash component to play the FLV in my SWF. (Not the built in FLVPlayback component) The video is about 2 minutes long.At the end of the video playing I would like a button to pop up that people can press to send an email to request more information. I have no idea what the best way to go about doing this would be and I do not know AS well at all.Currently my only thought is to make my player.swf (the one that plays my video) as long as my video (appr. 2 minutes) and then fade in a button towards that people can use. This would probably work but it is probably not the most efficient way of accomplishing this.Does anyone have any suggestions? I have been searching for things like adding annotations to flash movies just as YouTube does but have not found anything so far.
View 4 Replies
Feb 22, 2010
I'm developing a simple application at the same time as I am studying some things in actionscript and I've got the following code:
ActionScript Code:
if (Key.isDown(Key.LEFT)) {
x -= speed;
this.gotoAndStop(2);
_xscale = -scale;
} if (Key.isDown(Key.RIGHT)) {
[Code] .....
I've got an object, and every time I press one of those keys those actions happen. My problem is that, when I press SHIFT, the object appears in that way (frame 3), but It doesn't play that animation it just stops in the first frame. How can I say "if you press SHIFT at the same time as RIGHT or LEFT, gotoAndStop(3); and the object that is in frame 3 only plays if either RIGHT or LEFT is down too"?
View 1 Replies
May 13, 2010
I bought Adobe Flash Media Streaming Server 3.5 and I have problems with large video.After 70 minutes, the video stops playing.
View 8 Replies
Mar 9, 2012
I am making a banner that has multiple movie clips sharing the same area, creating different rainbow effects when different areas (invisible buttons) are moused over.
First of all I couldn't figure out if there was a way to have one invisible button over the whole area that changed to a different colored effect with each mouse over (first mouse over the black and whites would change to reds, second would change it to blues, third would change it to browns, etc.). Since I couldn't figure this out I settled on creating three buttons covering a third of the banner each, so when the mouse passes over one button it changes to reds, over another button it changes to blues, over the third it changes to browns.
The effects are movie clips where each frame has another stripe changing color so it goes in a wave effect from one to the next, and then goes back to white and black in the same manner. The first frame of each movie clip I had to turn into a nested movie clip so I could turn the alpha to 0, since I was going to have these color effect movie clips on top of one another in the main timeline on different layers, and so you could see the effect even if that color layer wasn't on top. I used the same nested movie clip with zero alpha for the first frame of each color effect clip (reds movie clip, blues movie clip, etc), so I dont' know if that's an issue.
Anyway, it seemed to work fine for a while, but after working on it for a while longer (and not getting any further since I removed most of the changes I made), now when I test the movie the mouse over does not seem to work correctly. It works fine, seemingly, for the first time I mouse over each button, but in order to have it work again I have to mouse over the button twice, and then it will pause randomly during a part of the clip and I have to move my mouse back over for the movie clip to continue.
I can't tell if this is because of the overlapping movie clips, or because my buttons are messed up, or if my actionscript is messed up, or if the timeline has to be longer, or what. Currently the timeline is 55 frames, the same as each movie clip.
I put a movieclip_instance.stop(); command in the first frame of the main timeline, is there a better way to do this? Should I put the stop command in the movie clip itself?
Here is a section of my AS in the main timeline, this is my first time programming ever, in any language, and trying to learn from the internet is more difficult than I thought it would be.
redmovie.stop();
red_btn.addEventListener(MouseEvent.ROLL_OVER, playRed);
function playRed(event:MouseEvent):void
{
redmovie.play();
}
View 4 Replies
Nov 8, 2010
I'm trying to load a movieclip that has some video running on it using a page container dynamically on the click of a button. however im not able to get the audio from pausing even when this page has been navigated to another. The video gets hidden behind the newly called page however the audio still continues to play on the called pagethis is the code i wrote to add the movieclip(page) to the container..
var gp1:gpage1=new gpage1;
menu_cont.media_menu.press_review.addEventListener(MouseEvent.CLICK,mediaclik3);
function mediaclik3(event:MouseEvent ):void {
[code]....
View 1 Replies
Mar 15, 2009
Is there a way to get this code to work? It's meant to count the seconds passed while playing the game and gives a bonus multiplier to the current score when the game ends. I don't know how to get the returned value to combine it into the multiplier int variable. Is there any way to get this code to work or is it completely wrong?
View 11 Replies
Apr 7, 2010
I have a live streaming application using RTMP. Sometimes the playback works fine but sometimes it stops without any trace or errors in the log file, while still appearing as a connected client.
View 7 Replies
Jan 12, 2012
I am having an issue when loading a dynamic text. Here is the code I'm using
Ext_text = new LoadVars();
Ext_text.onLoad = addText;
Ext_text.load("ArtText.txt");
function addText() {
Art_Text.htmlText = this.ArtText;
}
This does load the file but If there are any & or % in the .txt file it stops the text at that point.
View 3 Replies
May 19, 2008
i have a main MC( with 4 buttons on it) on the stage and when i click on a button it animates 2 blocks that have been created at runtime and goes from right to left. What i want is when i click on another menu button, the boolean changes and i must be able the rewind the animation and do another but it does not work.I must click twice, once it rewind and the 2nd one it shows the animation..
View 3 Replies
Apr 13, 2009
I'm making music visualization in papervision3d using FlashDevelop. The script generates 150 cubes each acting as different tone (from basses with red colors to high notes with blue).The song starts, everything works fine, but after 44 seconds song stops. I hadn't wrote function that would do that. I've turned off every useless visual functions and even papervision3d rendering. The scene is just black and the song still stops playing after 44 seconds.File is included with:
Code:
[Embed(source = "../assets/8bp069-05-she-session.mp3")]
because I'm not writing it in flash.
I've tried different song and it stops after 1:10...Flash uses ~30MB of Ram and 50% of my Athlonx2 64 2.6Ghz in action.
Here's some code: sound
Code:
[Embed(source = "../assets/8bp069-03-she-pioneer.mp3")]
private var Music:Class;
private var sp:Sound = new Music();[code].........
those last 3 functions have nothing to do with playback.Am I doing something wrong with computeSpectrum function? Here's the scrieennie of it in action: Of course it's like an alpha version of what I'm planning to do.
View 1 Replies
Feb 14, 2011
I have a problem with the following code:[code]The problem is that the code is working when I test the scene (ctr+alt+enter in flash), but after I publish it it doesn't work... not sending any request nor redirect.What I want to do is to log in a file on the server what the users typed (related with Related with: Flash actionscript - save a text file on server).
View 1 Replies
Dec 9, 2007
I have this preloader code that should not play frame 3 until it is all loaded, but for some reason while my prelaoder bar is showing progess, frame 3 is already loaded.
[Code]...
View 1 Replies
Jul 3, 2010
how to code this on a button
onrelease
gotoandplay(10); // i need delay here before activating the next code below//
gotoandplay(80);
the trick is.. i want the button to play frame 10 to 40 then after playing from frame 10-40 the movie stops and then play frame 80 to 100
View 4 Replies
Apr 18, 2009
I have a MC called Robot. It is animated with keyframes so that my robot appears to walk. There is an Action on frame 8 that says, "gotoAndPlay(1)".When the user pushes the arrow keys, I want to MC to move in the direction of the press arrow. I also want the MC to start playing at keyframe 9 so it plays the walking animation.
This all works but with one small problem. If the arrow key is held down, the "gotoAndPlay(9)" stops the animation from playing, instead showing only the graphic that is on the 9nth keyframe.
Code:
// initialize arrow variables
var leftArrow:Boolean = false;
var rightArrow:Boolean = false;[code]....
Is there a way to call a function once and play the MC frames until the arrow key is not pressed? I think the problem I am having is that if the key is held down, the EventListener keeps running and starting the MC in the same frame instead of allowing the MC to play as I want it to.
View 5 Replies
Jun 29, 2010
i'm attempting to draw lines beside each other, but the last line from the first color group takes on the color from the second color group before the second color is assigned.
[Code]...
View 2 Replies
Apr 18, 2011
My application has a tree with a custom item renderer, which depending on the type of data at a leaf uses different components as editors. In one case I am trying to use a datagrid so that the user can choose a row that meets his needs (several columns need to be displayed), ie. similar in concept to a ComboBox.To do this I have a function assigned to be the handler for 'itemEditBegin' (for the tree) in which I'm dynamically creating the datagrid, and then using the popup manager to display it as a (modal) popup. So far so good.
However, if you click anywhere (eg. scroll down button in the datagrid) the popup disappears because the itemEditEnd event is fired - why ?In another scenario, I have a DateField setup as the editor, and the user can click on the icon to bring up a DateChooser, scroll through the months, etc. I looked at the code behind this, and it is using a popup, seemingly in exactly the same way as my code !Here is the 'itemEditBegin' code:
dataGrid = new DataGrid();
dataGrid.dataProvider = mddTable.dataCollection;
dataGrid.editable = false;
[code]......
View 2 Replies
Nov 1, 2009
I was able to create an animation which only runs when I place my cursor over the animation box.The animation stops playing when I remove the cursor off the animation box.I was able to do this using button rollovers.How do I apply a URL link to this animation.When I place my curser over the animation box it plays,and when I click on the animation box I would like it to link to a web page.
View 1 Replies
