I am using Fuse to rotate a movieclip in a navigation system. The problem is, it flips out and rotates a full circle before getting to the final destination when the destination is higher than 180. I can't figure out why. Here is the code:
[Code]....
Been making a site and came across a problem. I want to have a ship movieclip follow the mouse slowly and rotate and flip on horizontal axis according to the mouse potition. I've been looking on this Here's the code on the timeline I got so far but it just makes the movieclip follow the mouse;
Code:
ship_mc.onEnterFrame = function() {
var xMouse = _root._xmouse;
[code].....
I want to rotate a 2d object on its' y-axis but it won't make a complete circle. It just turns 90and then turns back the same 90 in the opposite direction. How can I make my 2d object make a full circle?
View 1 RepliesDoes anyone know of any tutorial or code example that deals with resolving circle-circle collisions including rotation?
View 2 RepliesI've got a symbol that's circular, and I'm trying to make it rotate. My problem is that everytime I rotate it (45 degrees per frame), the dimensions change slightly on me. It's a circle with a height and width of 364 pixels. After rotating it clockwise 45 degrees, the new dimensions are 386.9 by 397.4. The result is a slight pulsing as the symbol rotates when the animtaion plays. I can't figure out what's happening, and it's SUPER frustrating.
View 5 RepliesI'm using a carousel script that rotates some images, the speed of the rotation depends on where the mouse is on the screen. The project I put it into is 962 pixels wide, the carousel itself is about 400 pixels wide, I want it positioned on the right half of the project, so I put the code in a blank movie clip and positioned it on the right.
It works fine, but the problem is the rotation gets crazy fast as the mouse moves to the left side of the stage, because there's so much more space on the left then there is on the right. I only want for it to stop gaining speed when the mouse leaves the carousel area.
Code:
//We use 70x70 sized images (change this if different for your images)
const IMAGE_WIDTH:uint = 70;
const IMAGE_HEIGHT:uint = 70;
[code]....
i have 2 movieclips: i want to move both of them but the second movie clip will only move if the first clip reach his final destination how do i do that?
View 2 RepliesI am trying create a rotating circle with buttons/menus around the edges and this would simply rotate around, not like a 3D carousel, just basic rotation of a circle triggered by movement of the mouse on a vertical axis!I have attached a jpg example to give you an idea of what I am trying to create.Would anyone be able to direct me to some tutorial something similar as I can't seem to find anything.
View 1 RepliesI have a circle: Width 530 and height 800. I want an object to follow this circle using a motion path, but you cant do that in pure actionscript, so I tried rotating the circle with the object attached, but warping the circle at the same time... so width becomes 530 and height becomes 800... but because the circle has rotated at the same time, it looks like it hasn't moved - except for the object attached.
ActionScript Code:
import fl.transitions.Tween;
import fl.transitions.easing.*;
import fl.transitions.TweenEvent;
var Tween1:Tween = new Tween(circle,"width",None.easeNone,800,530,2,true);
var Tween2:Tween = new Tween(circle,"height",None.easeNone,530,800,2,true);
var myTween:Tween = new Tween(circle,"rotation",None.easeNone,0,180,2,true);
This was the closest... but it still dances around the page before anything happens.... and it isn't reading the sizes properly? 530 isn't 530, but something bigger, and 800 is actually smaller?
This is my semi-finished art project URL...If you open it normally (providing you have a webcam) it works perfectly however I'm looking to showcase the piece on a projector and need to have it full screen.[code]I have made the piece so that the "orbs" rotate around the center point and the diamter of the rotation alters dependant on the activity level of the webcam. It looks very pretty when you open the swf. normally but when full screened the centres of rotation are completely off.Whats the best way around this? I'm in desperate need of full screen capability! [code]ps forgot to mention. all code is inside a blank movieclip called "orb" and then a copy of the movieclip is placed in every corner but flipped/rotated to achieve the butterfly/symmetry effect. this is the issue i belive that effects the full screen stuff.
View 1 Repliesi create this code but i cant spinning it with mouse (when i hold it)
Code: Select allmthr.addEventListener(Event.ENTER_FRAME,rotate);
function rotate (e:Event)
{[code]....
What I am trying to to do with this ad is have two separate URLs to click on. I would seperate the ads but this is what my client wants and I can't figure it out for the life of me!!
[Code]...
How does one use fuse within a class? I can't seem to get it to work. I'm not sure where to put
ActionScript Code:
ZigoEngine.register(Fuse);
I've done many searches on this and I can't find any examples of using fuse within a class, only examples using it on the main timeline of flash.
im working on a site that uses page flip but i wanted to make multiple flips as well. imagine 2 strips that are independant of eachother that both flip. i was going to make 2 flash files and load them into a container flash file.
View 1 RepliesI am trying to find a menu to implement in the form of a coverflow. I have one accessible but flipping through the covers requires that I click covers, or use the scroll bar.
I am looking for one that will move left and right without requiring clicking. Dragging is probably acceptable. I have been sifting through the google search results, but it seems most coverflows are modeled the same. It doesn't need to be free, but if I could customize it via XML that'd be great.
I've created a flip book in inDesign.Is Flash the best place to work on touch rather than mouse controlled page flips?
View 1 RepliesI am trying to change over old code (Actionscript 1.0) to use Fuse in Flash 8. Old code uses: this._x = Math.easeInQuad(this.t, 0, gox, 6); So my new code in Flash 8 would be:
import com.mosesSupposes.fuse.*;
ZigoEngine.register(PennerEasing);
this._x = PennerEasing.easeInQuad(this.t, 0, gox, 6);
Is that all I need to do to do an easeInQuad? Do I have to declare/define it somewhere or is the equations, parameters it accepts builtin to Fuse?
I am building a flash header for a client and have a Movie Clip moving along the X axis. What I am looking to do is have the two images inside the movie clip and they swap depending on what side of the image the cursor is on (left or Right) side.
I am using Flash CS3 with AS2
Here is the code I am working with
mc_shark.onEnterFrame = function() {
var xMouse = _root._xmouse;
if(Math.abs(xMouse - this._x) < 1) {
how to call the second image based on cursor position.
I apoligise if this has been covered many times before but when I run the fuse. tutorial I get the following error: The class or interface 'Fuse' could not be loaded. The error refers to line 7 --- var f:Fuse = new Fuse();
View 5 RepliesI've been trying to work out how to create a 'wash-out' effect using fuse. Now, I did work out how to wash it out to white, but I also want to make it go the opposite (washout to black).This works to wash it out to white:
[AS]import com.mosesSupposes.fuse.*;
ZigoEngine.simpleSetup(Shortcuts, PennerEasing);
myMC.colorTransformTo(255, 255,255, 255, 255, 255, 100, 100, 1, None.easeNone);[/AS]
I've been playing with the numbers, but just can't get it to go to black?
I'm having a problem with my preloader and importing Fuse classes.
[Code]...
When I simulate download, the State is Frame 0 and it doesn't trace(amount) or scale the bar_mc until it is 100% loaded. If I remove the Fuse import, it works as it should. What is the best way to fix this problem? Is there a way to fix it? I'm continuing to search for a solution, but thought I'd ask the knowledgeable folks here first.
This is my first post and my first day even touching actionscript beyond the typical behaviors such as buttons or loading an external movie. I trying to learn tween via AS. Fuse first and then Tweener. I'm not sure which is easier to learn, but neither have a 'dummies' book and constructors, events, objects and hoot-nanny just confuse me.
I have a series of tweens using Fuse and at the end I want it to go to frame three, but not before. See below:
[Code]...
Is the Fuse kit for animation now obsolete with the introduction of Flash CS4 and AS3?
View 2 RepliesI tried to do a space game But there is a big big big problem I couldn't remove the movieclip (bomb)Here is the fla CAN YOU HELP ME?
can you remove the "fuse" for me
I'm developing a game atm, and I need some help on the mathematics/coding of colliding circles (and their change in x/y speed). What i need to know is how to calculate the direction and speed a circle has after colliding with a static (non-moving) circle. I know how to detect a collision between the two, but I'm not sure about the maths I need to give the circle the right speed and direction after the collision
If i do know how far away the two circle-points (in the middle of each) are to each other (in both x and y coords) would it be easy for me to find the new speed and direction of the large circle in the example above? I know that I somehow should use the angles to pretend the circle hits a flat "wall" (as it only hits one point), and then calculate the new speed/direction. My only problem is that I'm not sure how to decide the angle of this flat "wall" and how x and y speeds should change when colliding with a wall that is angled. Does anyone here have any insight, links or tips on how I can du this?
i want to make one circle follow the mouse cursor, inside another circle. Similar to an eye looking at the cursor. Ive attached an example.
View 4 RepliesI have text in a dynamic field showing up as circle. I want to say if circle shows up change it to cercle (french).
[Code]...
What i need to know is how to calculate the direction and speed a circle has after colliding with a static (non-moving) circle. I know how to detect a collision between the two, but I'm not sure about the maths I need to give the circle the right speed and direction after the collision.If i do know how far away the two circle-points (in the middle of each) are to each other (in both x and y coords) would it be easy for me to find the new speed and direction of the large circle in the example above? I know that I somehow should use the angles to pretend the circle hits a flat "wall" (as it only hits one point), and then calculate the new speed/direction. My only problem is that I'm not sure how to decide the angle of this flat "wall" and how x and y speeds should change when colliding with a wall that is angled.
View 6 RepliesI am doing an animation using a parigrafika's page flip code. I have different pages being autoflipped at different speeds: Main timeline:
[Code]...
What I need to happen is if the user has ever clicked the mouse during the animation, don't run the code on the individual pages. How I have it now, it still executes when it gets to page 1,2, or 10.
I`m working on a app that you can draw lines.....like circles, rectangles... my problem is when a user draw a circle for example....i wanna be able to paint (change color) inside of this circle. I`ve tried working on Shapes with cacheAsBitmap = true and Bitmaps with BitmapData but it doesn`t seens to work.
View 4 Replies