I have a one key frame movie with 20 square symbols over the page, each one is a movie clip, that when clicked plays a movie clip. The movies all function and do what they are suppose to, but the issue I have is that when the movies play are obscured but some of the other movies.
What I need to happen is that any one of the movies, when clicked comes to the top level, on top of everything else.
Is it possible to access a global variable from an swf on a different level than another (outside of movies)? Or are they only global in the sense that they can be accessed from different scenes in the same movie? I want to check whether or not a certain movie (called by loadMovie) is on a certain frame (if else statement), and then act accordingly (tell it to play a certain frame in that movie [shut itself down, figuratively], or nothing).
View 5 RepliesWhen you have movies in a layer, how can you stop the buttons of the underlying levels from showing through. I don't want the user to think that there is a button on the level showing because the cursor turns into a hand....plus also when clicked it does activate the lower movies actions.
View 1 RepliesRecently i had a problem with my flash player after installing a Windows Update (not sure if its related). Movies played on sites like YouTube became out of sync and pixelated. Im not exactly sure how to explain this, so i uploaded a few pictures of the issue.
[URL] The sound is normal and the only thing affected if the video. If is there is any sudden movement in the video, it will distort the image. using v10.2 and am on Win7 x64. Viewing the video's in Firefox. I had the same issue on my older computer a while back using Vista x64 in both Firefox and IE. The problem on my older computer was resolved by simply restarting the computer. But this time that didnt work. I also tried uninstalling and reinstalling flash, and restarted multiple times
When creating some extended MovieClip to the stage using AS on Actions of some frame, on which layer this MovieClip is created? On layer where Actions were? If I wanna move it down, for example, can I simply move the Actions layer? And by the way, one more question, what if I would not create Actions layer and write all the code on some used one?
View 2 RepliesWhen I have a class linked to a MovieClip in my library and that class takes an argument in its constructor method. That class will compile properly ONLY when it's located in my top-level directory (same dir as the .fla and Document.as files). If I move that class to a deeper directory, say com.place, and update the package statement and symbol link appropriately, the compiler will generate error "1136: Incorrect number of arguments. Expected 0."Create flash project and put a rectangle on the stage. Covert it to symbol and assign it to class TestPanel - or whatever you choose. Also configure the fla so that is uses a Document (Main) class.Create Main.as and TestPanel.as in the same folder. In the Main class, instantiate a instance of TestPanel and add it to the stage. Flash will, predictably, add the rectangle symbol and everything is fine.Now modify TestPanel so that its constructor method takes a Number and have Main.as pass some number to TestPanel.[code]You now get the error: 1136: Incorrect number of arguments.Expected 0.When I move the TestPanel.as into a deeper directory, Flash somehow is looking elsewhere for the base class for Symbol, even though I'm mapping that Symbol to com.place.TestPanel.
View 4 Repliesim trying to create a level select screen so the buttons unlock as you complete a level, so far i have this on each button:
on(release){
if(this.number <= currentItem){
gotoAndPlay(3);
}
}
[Code]...
I have two layers in my FLA both with empty movie clips as follows:In mc_Empty1, I attach a faded background movieclip as I wait for mc_Empty2 to load a SWF. Once the SWF is loaded into mc_Empty2, I want to remove the faded background movieclip from mc_Empty1. When I load the SWF from the main timeline, the onLoad() function works and removes the faded background from mc_Empty1. However, when I load the SWF from mc_target, the SWF loads, but the onLoad() function does not. Here's my AS2 code:
//Loading SWF from main timeline
mc_Empty1.attachMovie("mcFadedBg", "mc_FadedBg", 1);
mc_Empty2.loadMovie("My.swf");mc_Empty2.onLoad = function():Void{ trace("loaded"); //This works removeMovieClip(mc_Empty1.mc_FadedBg); //This works}
[code]....
I know I'm targeting properly because the SWF loads as it should, but the onLoad() function does not.
This is making me a little kooky today. I thought I could defined a library path in PREFERENCES > ACTIONSCRIPT > ACTIONSCRIPT 3.0 SETTINGS then that library would be available to all AS3 FLA files, but that doesn't seem to work for me. If I use the PUBLISH SETTINGS and define the library path everything is fine.
Is there something that I could have done to disable the application level class path functionality? I guess I'm trying avoid having to set the library path for every new FLA I'm making.
I'm doing a bigger aplication in flash (as2).Image, there is a main "home" flash with several menu buttons.Clicking these buttons, I load external swf into an empty container in this "home" flash.[code]clicking buttons in this second level, will load external movies into an empty container in this SECOND LEVEL swf.This works fine, but now, coming to the THIRD LEVEL (don't think there will be more in the future) problems come up, some scripts won't work.Now (I'm a as2-beginner) I think, loading external swf ALLWAYS into containers in the first "Home" flash should solve the problem.But I don't know, how to load an swf from the third level into a container in the first "home" level.In the "home" level, I have a "close" button, that will unload the container content.I need to go to a certain scene "content_2" in the home swf, too.
View 7 Repliesi have game im doing, and i want it to jump to level 2 upon completing the first level, but the problem is, the level 2 is a seperate swf, i've tried to use
Code:
on (release) {
loadMovie("level2.swf",2)
}
I have called main.swf into a container in index.swf.
myMCL.loadClip("main.swf","container"); is an action on my Index.fla timeline.
I have my navigation on index. (i wanted it to go on main, but the nature of the animation meant it had to go on index)
I need to call "home.swf" into "main.swf" from the navigation button in Index.swf.
When I had the navigation on "main.swf" this was my code to call "home.swf" into the page.
on (release) {
Preloader_mc.gotoAndStop("home");
}
("home") is the label name where the preloader is for home.swf
how to call the preloader for home into main.swf from "INDEX.SWF INSTEAD OF MAIN.SWF"
I have a file1.swf which loads file2.swf into it. Within file2.swf i have a button that when clicked needs to remove file2.swf and load file3.swf into its place.
View 2 RepliesIs there a way to link to one level below the current level? Instead of saying _root.level1.level2.level3, something like: ../level3 ?
View 4 RepliesThe "size" is 1200x800 pix, and here is were the problem is. When a person look at the site with a 1280x800 or smaller a bit of the site is not there. I don't want to resize the file, so i thougt that the easiest way to solve this problem were to input a scroll, but I can't get the damn scroll activated. Do i need a huge actionscript or is it as simple as mark somewhere in publish (when you create the html-file) need answer as fast as possible.
View 2 RepliesI have an intro.swf file that is basically a movie with sound that is exported for actionscript but not exported in the first frame. I just stuck it in a movie on my timeline and it works great and the preloader works because it doesn't load the sound before the preloader. I use :
musicSound = new Sound();
musicSound.attachSound("music");
musicSound.start();
to play the sound in intro.swf.
However, now this intro.swf gets loaded into an index.swf and everything works fine and the sound plays as long as I have the sound included in BOTH the intro.swf and the index.swf and the sound is exported on the first frame in the index.swf. I was hoping I could remove the sound entirely from my index.swf since it already loads into the intro but so far
I have been having trouble creating a movie clip with a reverse rollover effect within a movie which has a reverse rollover effect. that sounds confusing
In essence I wish to create a panel that rolls out on rollover and rolls back in reverse when the you rollout. I have done this using this script
[Code]...
However I wish to make movies within this movie that have the same effect on them. But when I create another movie or button within this movie it is not registering on rollover. I guess because the script on the main movie overrides it?
I have an object that has been added to the stage, exported properly for actionscript, and given an instance name.It's class file is this:
PHP Code: [code]....
And yet none of this works. The trace doesn't even go off, meaning the constructor is never activated. It's linked properly; if I go to the movie clip's preferences and hit "edit class file" it takes me to the proper one.It's possible that the problem lies with the frame numbering. The first time this object is added to the display list is in Frame 2...and it says "export in Frame 1" but I'm not exactly sure what that means or how it affects the class definition or how to get around it. I tried adding it (var sb:SoundButton = new SoundButton in the first frame,
I'm trying to figure out how to get buttons to be activated by keyboard presses. I have found how to do that with specific keys ... but not with ANY keypress. I'm making a game for tiny children and they can't manipulate the mouse well. So I'm setting up a few things on stage that will run in a certain order when the child presses any key on the keyboard. For example, any key is pressed, dog wags his tail .... any key is pressed again, cat jumps, any key is pressed a third time, cow munches hay, and so on till it goes through a bunch of animal animations, then goes back to the first one. I'm pretty new at this stuff and have been banging my head against google for days trying to find the answer to this out there with no luck! I could do either movieclips or movie clips inside buttons if that makes sense.
View 1 RepliesWhen the user mouses over a button, it brings up a menu. I want the user to be able to click things in that menu that pops up, but of course when the user moves the cursor off the button and onto the menu, it deactivates the button and the menu disappears. Is there a way around this?
View 3 RepliesI'm trying to create a scrollpane that is activated by a button. I've already created the scrollpane and linked it up with the text I want, I just need to know how to make the button activate it.
View 15 Repliesanyone got an idea of how I can create sound or voice activated animations? What I want to do is set up a microphone so when a viewer speaks, a movie will either activate a sound clip or an animation?
View 3 RepliesI have a mc that when clicked moves off screen, however when it starts to move, once the mouse cursor is off it, it moves back to its original position because my onOut event is to have it move back to the original position.
How do I avoid the onOver activating after the mc has been clicked?
(p.s. - I'm wanting the button to also lead into the next frame and to never be seen again).
Situation:
- We have a Flash application located on a SAP EP (let's say ep.x.com)
- We have a SAP ABAP Application (Webservices) on a SAP WebAS
server (abap.x.com)
- Clarification: This is not about Flash islands / but a normal Flash application communicating with WebAS ABAP via WebServices
Problem: Due to the changed security policy in Flash 10 this scenario does no longer work.
- A crossdomain policy file on root level cannot be deployed on root level
- The WebServices http/s headers cannot be modified, since the WebServices are generated by the WebAS IDE.
Comment: Technically there is a way to patch a WebAS ABAP,but this is not a practical / acceptable way in a normal SAP WebAS infrastructure.
Conclusion:- The above scenario (Flash from EP content / WebAS ABAP as backend) is a quite normal scenario in the SAP world.
- SAP / Adobe always features the close relationship between their technologies.
Question:- What could we do?
- How does the Visual Composer works around that problem?
I'm creating a platform game, and I want the character to hit a button which would take them to the next level (keyframe).
I want it to work like a normal button, except for the character on the screen, on contact with the button to transport into the next keyframe, rather than the user having to click the object.
Also, is there anyway to do this while at the same time (while changing to the next keyframe) keeping the score, so it adds up with the next levels points?
I am trying to have a link on a web page open up a flash video that appears to hover over the html. I have read web pages explaining parts of this but I cannot get it all to work together.
I am using swfobject to embed the flash object into the web page. I think I need to use javascript to handle the event of clicking on the button and then use z-index to have it appear to hover. Ideally the flash would center itself in the middle of the browser
I have a mc that when clicked moves off screen, however when it starts to move, once the mouse cursor is off it, it moves back to its original position because my onOut event is to have it move back to the original position. How do I avoid the onOver activating after the mc has been clicked?
View 3 RepliesI want to have pop-ups activated on mouse over of a button in my all-Flash website. By pop-up, I mean in the same browser window. Just a small window that comes up with a small amount of content related to the respective button. How do I do this?
View 4 RepliesI made this menu : my menu
I am looking to make an improved and more advanced version of the same menu.
I made an animation of waves on the cofee's surface and am looking to make it loop when the mouse is moving and to stop looping when it's not.
I'm designing a countdown timer that starts when you press a button.There are 4 buttons altogether in which i placed preset values like say, 5,10,15.20 mins.You get the drift.and it is supposed to start counting down from there.
However,when i press the button,it just gets stuck at a certain number e.g 4:58:49 and it doesnt count down.My actionscript is written like the one below.i don't understand why it doesnt work.A
stop();
start_time = getTimer();
_root.five.onPress = function () {
countdown = 300000;
[Code].....