i'm trying to get something like: [URL] i have this so far: PHP Code:
[Code]....
that scales the inside clip properly but i cant get the outer part of the "tv screen" to work
I've got a simple function that makes a movieclip drift over to wherever the mouse is..
It's a nicer effect than just making the mc._x and mc._y = _root._xmouse and _ymouse.. The problem I'm having is that if the mouse is in the top corner of the screen when the movie clip loads, the mc zips off to that corner too. I want the mc to stay in the middle of the screen when it loads and to move in the direction of the mouse when the mouse moves.. The mc still needs to be able to be moveable accross the entire width of the screen however.
I have tried storing the _xmouse value at the time the movieclip loads, and then offsetting my function with this value - which has the desired effect, but prevents the mc from being able to be moved all the way to the edge of the screen.. Hope that makes sense - Has anyone got any solution to this?
[Code]...
I've got two concentric circles with their centers at (centerX,centerY). The inner circle has a radius of 100 and the outer circle has a radius of 400. If take a point on the circumference of the inner circle, I can draw a line from the center to that point. Let's call that point x1,y1). I now want to continue that radius out to the outer concentric circle and calculate the position of that outer point (x2,y2).
I'm adding a 3px 'dot' just to show where x1, y1 is on the screen. (Subquestion: I can't see it...not sure why.)This is what I'm trying:
var x1:Number = 100;
var y1:Number = 50;
var x2:Number;[code].............
I made two movie clips that follows the mouse but I want to put constraints on them, they should follow the mouse until the mouse reaches a curtain distance and then the movie clip should pop back to its original x and y position.Code: Select allprivate function init():void[code]......
View 1 Replieshave created this really cool mouse follower that changes colors, I 've done this in AS3 and now I'm at a total loss as to how to get it to work with my website.
View 11 RepliesI have succesfully achieved a mouse follower using the following code, [code]the part I need to understand how to change is:I want to offset the MC in relation to the mouse pointer,probably by assigning variables, not sure though.
View 3 Replieshow would one go about making a mouse cursor follower in Flash MX, if one was so inclined??
View 3 RepliesDoes anyone know how to set boundaries on a slow chase mouse follower. Attached is the fla im trying to set boundries to. The ball should not go past the red lines.
I have used the following code:
Code:
onClipEvent (load) {
_y = 0;
speed = 5;
[Code]....
I'm looking for an AS solution to creating an elastic screen transition. I want the screen to stretch and snap into position, before loading the contents any ideas on where to start?
View 5 RepliesI'm looking for an AS solution to creating an elastic screen transition. I want the screen to stretch and snap into position, before loading the contents
View 5 RepliesHow can I make a action script controlled print screen that will save a part of a screen And can I filter a color out of it (so that only that one color will NOT be visible on the saved img) with AS
View 3 RepliesI'm currently creating a navigation bar for a project using flash cs4, action script 3.
As you can see in the picture there is a navigation bar, and inside this bar there is a small rectangle and two lines (located at the first located at x=25 and the second x=555).
I want the rectangle to follow the mouse but be slightly delayed (elastic?).. Another requirement is that rectangle only moves on the x axis and therefore the y axis doesn't change(it is y=68), but doesn't move further than the two lines. The rectangle is a movie clip and its name is 'rectangle'
I pretty much want it exactly the same as this [URL] except the ball can only move on the x-axis and in between the two lines.
I have the elastic movement snippet (from Keith Peters), which works fine except for Flash 7 player and higher. In Flash 7 leafes just scatering outwith no elastic interaction. Compiler doesn't throw any errors.I tried Actionscript 2 static strict type variable declarations, but no success.
1 frame
this.createEmptyMovieClip("leaf_elastica", 50);
if(!max) max=4;
[code]....
draw a line from the bottom left corner of a movieclip to the mouse pointer. I need the line to be "elastic" because both the movie clip and the mouse pointer will be moving. I've tried various things with lineto but have failed to get the line to redraw and follow the pointer.
View 4 Repliesi have an MC (hand) that ive made to be draggable. once the hand is released it should return to its original position....but of course, it doesnt. the code is a slight variation of some i found a while back and have kept in a folder. first frame on code layer in main timeline Code:[code]
View 7 RepliesAnd also is there a way to print a part of flash contents of maybe entirely compose the stuff (image that is) you give to printer.In my case i have a flash in which contains to pictures (basicaly even and odd page of a book) and other stuff. I want to add printing functionality. Also i want user to be able to choose what to print - whole flash, both pages or just one of them
View 2 RepliesMade the part I'm having problems with bold
import com.greensock.TweenLite;
import com.greensock.easing.*;
import fl.containers.UILoader;
[code].....
I am trying to reverse engineer this: [URL]
I have code to capture a jpg
The trouble is I cannot fugure out how to target the save to a specific part of the stage, as opposed to a screen shot.
here is the link:
[URL]
Hit the spacebar to save the jpeg.
Code: Select all//see com.adobe.images folder for information about downloading
// the adobe JPGEncoder class
import com.adobe.images.JPGEncoder;
var rect:Sprite=new Sprite();
[Code].....
screen size: 550 x 400 i want to spawn movie clips randomly from the upper part of the screen and to make them go to the bottom. My game name is coin collector, so i want to spawn coins falling down and make my stickman catch'em.
ActionScript Code:
Add the AS2 in a box like this one
How can I make a border in a part of the screen that when objects inside hit it they cannot pass it. for example like flash games have with bubbles that cannot pass the screen border and they just travel in the screen's space.Is it possible to make this with box2d. I haven't worked with this framework.
View 4 RepliesI'm using duplicateMovieClip to create instances of a clip. Then I use an array to name the clips. In the scrip that duplicates and names them, I also have an onRelease function to make the mcs do something when you click them. I can't get this onRelease part to work. I need to:[code]
- swap the depths
- load some text
- attach a movie from the library
I have two views in viewstack. One has a VRule extending from top of screen to bottom. Another view has a big accordion. If I give viewstack percent height=100%, first view works fine and second view gets clipped or has a vertical scroll bar inside view stack. If I dont mention viewstack height and set resizeToContent to true, second view works fine and first view takes up only small part of screen. If I mention viewstack height and set resizeToContent to true, first view works fine and second view gets clipped or has a vertical scroll bar inside view stack. I want vertical scrollbar but for entire window, not just for viewstack. How to accomplish this ?
View 1 RepliesI downloaded this free flash website template for building my website, all the actionscript in the template in AS3, i tried using xml flash - photogallery (for which i found the tutorial on this website.) in my website, but while publishing the site, it gives error, i guess it might be compatibility issue as the script that i found on the website might be in AS2 and that might be clashing with AS3 script of the template. Coz when i change the publish setting to AS2, the AS3 part of the script does not work. Individually both script in their respective separate files work but when combined together the site goes bonkers. as i want the photogallery part exactly as it is shown on this site which is with the thumbnail preview.
View 1 RepliesI'm using duplicateMovieClip to create instances of a clip. Then I use an array to name the clips. In the scrip that duplicates and names them, I also have an onRelease function to make the mcs do something when you click them. I can't get this onRelease part to work.
I need to:
- swap the depths
- load some text
- attach a movie from the library
I can't see any errors with my script, so I hope someone can look at it and give me a clue. The part I'm having trouble with is:
[Code]....
I am very beginner in flash. I want to load an image, show a cursor over the image and on mousedown I want to blur that actual part of the image. (e.g you can blur your face on the image and then save the new image).I can delete parts of the image with white line, but I would like to blur it instead
// LIVE JPEG ENCODER 0.3
// from bytearray.org
import asfiles.encoding.JPEGEncoder;
import flash.external.ExternalInterface;
[code].....
I want when user roll over on my image it shows a part of big image of the same picture i known its possible in flash but how i don't Known ?? here is the link of the live example the site use the same technique in flash
click here
I have a MovieClip of an bicycle, and I've attached and event listener for mouse clicks on that movieclip. The mouse clicks events are raised when I click on the bike, but I really want to be able to click somewhere in the entire region of the movieclip's rect (to make it easier for the audience this is for to be able to click).
View 1 RepliesI have a replay button that is already working great, but I want the arrow part of the button to spin in the 'Over' state. What I tried was creating a looped frame. I went inside the button itself, (button composed of an arrow symbol and text). I then went to the 'Over' state and went to edit the arrow symbol itself.when I drag the playheader in there, it seems to loop just fine, but when I export it it's not working.
View 9 RepliesWhat I have is a bitmap as render cache for a sprite, and there're many of them present on the stage. I expected that they would react like sprites with mouse-click event, but they didn't. They're like rectangles all around, matter what the original sprite look like, And I tried put bitmap cache into sprite container and use sprite's hitArea property like [code]...
View 1 RepliesI have a problem and I have potential solution. But I wanted to confirm if there is an easy and simple way to solve my problem.App type:Isometric Game.Problem statement:I am loading images in my flash app and have mouse events attached to them.The images I load are prop images like vehicles, trees, buildings etc., and all of them are transparent.Example: Red ball asset (please ignore the yellow background which I applied to describe the problem)If I click on the actual image area (colored in red), then every thing works perfect.I don't want to trigger mouseevent when I click on empty image part (or transparent area, which I have shown in yellow color)There is one way I know by creating masks in flash. I don't want to do it unless that is the final option left because I load image assets instead of flash assets and I don't want to create a new mask asset for all the assets.There is another method I was going to adopt by using getPixel method of Bitmap.
But there is another problem with this method.I might be able to ignore the click event when I click on the empty part of the asset but if there is some other asset is behind the image in the same location, then I need to process the click event for the occluded image.Well, thinking of solution to this problem takes me to the getObjectsUnderPoint where I can scan the occluded assets