ActionScript 2.0 :: Get An Animation To Pause At A Desired Frame?
Sep 15, 2004
I have tried to figure out how to get an animation to pause at a desired frame after a click rather than just stopping it at that exact frame or putting a stop action at the desired frame. My goal is to have a movie sequence play continuesly and when a user so desires he/she can click and stop the movie, but rather than stop it while it is in transition at that exact frame, the movie should continue to a point where it is logical for the movie to stop.(example: the movie is at frame 2 when the user clicks, but instead of stopping at frame 2 it continues to frame 10, and then stops) Then on another click the movie will continue through it's sequence as it was before. I would like to use a MC, onClipEvent to handle the script in Flash MX.
View 3 Replies
Similar Posts:
Dec 2, 2010
Ive had a search through quite a few forums and message boards but havent quite been able to pin down what I need to do. I'm working in flash cs5 and using AS3
I have a button (bttn1) which when clicked plays a movieclip (bounce), but I would like it to play from frame 1 then stop on a desired frame(say frame 10), so when a second button is clicked (bttn2) it plays from frame 10. Hopefully i've explained it ok...
View 4 Replies
Dec 2, 2010
I have a button (bttn1) which when clicked plays a movieclip (bounce), but I would like it to play from frame 1 then stop on a desired frame(say frame 10), so when a second button is clicked (bttn2) it plays from frame 10.
View 7 Replies
Apr 21, 2010
I started some days ago with Adobe Flash CS4, and I need to create buttons now. The button I want to create this time should be a frame by frame button, so when the user clicks 1 time on the button the animation needs to go 1 frame further and pause there.
This is what I coded so far:
nextframeknop_btn.addEventListener(MouseEvent.CLICK, nextframeClick);
function nextframeClick(event:MouseEvent):void{
play();
stop();
}
And I assume I need to create some kind of time interval of 1 frame between the "play();" and the "stop();".
View 5 Replies
Jan 11, 2011
I'm sure this has been addressed before, but I'm going a bit crazy here. I have a button that I want to go to a frame labeled "start" but in Internet Explorer it snaps back to the button's frame. I don't know what's going on. I've done this a hundred times before and it's worked. Is it because I'm in Flash CS4 saving as Flash CS3 - in Actionscript 2?
View 1 Replies
Aug 2, 2009
I have some banners I am doing right now and have a pause timer question. I am fairly green at coding. In my first frame I have this:
[Code]...
I want it to pause each time in the last frame for 8 seconds and loop only 3x. Is there a better way to write this? I know all my code should be in the first frame but I still suck.
View 2 Replies
Jun 2, 2010
My objective is to paste together several ( a lot, actually ) armature animations, each in a separate symbol.I have no idea how to do it, armature layers are a bit... strange. So i see only one solution: convert it to a regular layer.
View 1 Replies
Feb 5, 2008
I would like a button on a keyframe mid-animation to stop the timeline if the mouse is over it and when the mouse rolls out of the button it continues to play. Is there a method like this that will work?:
if(MOUSE_OVER.btn_hold){
then stop();
} else if(MOUSE_OUT.btn_hold){
[code]....
View 8 Replies
Dec 31, 2010
Im an Industrial Design student that has never really used any Flash before but need to use it now to mock up an interface design for a product/service I'm developing for my major project.
So far, in ActionScript 2.0, I have a picture of a TV and remote control and intend to design the interface over the top of the television picture and highlight buttons on the remote beside it, that the moderator can click to navigate around it.
To get across the idea that the interface pops up over the existing moving television picture I have imported an FLV of some television ads. My problem is that I want the Flash animation (everything but the FLV if you like) to pause and not loop, and the FLV to continue playing (and looping) in the background, but can't figure out how to do it. Ideally the FLV needs to continue playing, seamlessly behind the interface after the next button is clicked etc.
Wherever I seem to put a stop(); action it'll stop everything, including the FLV, and if I just extend the timeframe to the length of the video, it'll still stop at the end or just loop to the beginning of the entire SWF.
View 1 Replies
Sep 29, 2010
Im trying to pause a loop in my flash animation. I have been trying bunch of codes nothing seems to work.
I have an actions layer.
The animation is 15 seconds. I will extend it to 30 seconds but i want few seconds pause between the 2 loop starts.
View 1 Replies
Nov 4, 2003
so I have a looping animation that is several frames long. Inside the animation is a button, when pressed I want to go to another part of the timeline, where another animation is waiting. Simple, I got that working no problem. But... I need the first animation to go to the last frame in the loop before starting the next animation. The way I have it now makes an ugly cut, and the transition between animations isn't seamless.
[Code]...
View 4 Replies
Feb 27, 2009
I have a very very simple flash animation put together, and I believe I set the document up in actionscript 3.0.
There is 4 layers currently: 1: a background, 2: a border, 3: a transparent png, 4: several images that run through a classic tween to make a scrolling effect.
Besides the tween, there is nothing else running and the tween is just taking some images in a straight line.
Is there an easy way to have it so that when someone puts their mouse over the flash in any location that it pauses on that frame and when they remove their mouse it will continue from that location?
View 10 Replies
Jul 31, 2010
I'm creating a simple image slideshow gallery where the images are presented one after the other in -fade-in - fade-out animation. I'm looking for a 'smart' way of delaying/pausing the slide show at the peak of the image brightness. I've found several codes however, they messed up the function of the PAUSE, NEXT and BACK buttons. Pause button would pause on an image, however the delay timer would start counting once again and the animation continues.
View 6 Replies
Jan 11, 2012
I have a sequence of images that make up an animation.[code]...
View 13 Replies
Feb 15, 2012
I am trying to set up a presentation with small clips (pictures that fade in and out) but I need to insert pause so I can provide some explanations to the public. I create a button and inserted an action (stop) on a specific frame, then on click, the timeline move on to the next frame and the animation starts again.This works well. this is the code snippets I used
[Code]...
View 15 Replies
Sep 15, 2009
I'd like to pause an animation loop when I rollover a button(the button is part of the area that is being animated and I want all the other buttons to stop animating except for the one I rollover) and then start the animation back up again when I rollout.
View 2 Replies
Oct 27, 2008
I'm having difficulty adding a Play/Pause button to an FLA animation that I've created. The animation is a frame-by-frame clip with motion tweens (rather than an FLV file). I'd like the Play/Pause button to toggle between a PLAY state and a PAUSE state depending on whether the animation is already playing or paused. (It will automatically play when the user begins viewing it, so the first button state should be at PAUSE.)
I've sucessfully created the button (actually as a movie clip with the two states). I've also got the button to pause and play the animation--but I'm unable to get the button (movie clip that is) to actually toggle between the two states. Can anyone tell me a good script to use for this type of control?
View 3 Replies
Jan 6, 2012
My final goal would be to have the animation pause after the first click, then resume with the next click and so on.So, after successfully having started the animation on I tried adding a
this.addEventListener(MouseEvent.CLICK,stopF);
function stopF(e:MouseEvent):void{
this.stop();
[code]....
View 1 Replies
May 11, 2009
I have been having trouble with the timer, knowing how to plug into the scripts/Functions the correct way. Below is the script (probably not written as efficently as it could be, but I'm trying) Anyway, the script is uses simple tweens for a movieclip. I would like to use the timer/setinterval function to pause the animation between tweens (Using the event listener after the tween stops to start the interval/pause) Is this the right concept or am I barking up the wrong tree.
[Code]...
View 3 Replies
Apr 15, 2011
I'm trying to create an animation which involves play and pause buttons, i've tried following the tutorial but because my animation is on many different layers it won't work.
View 1 Replies
Apr 21, 2009
how to create a play/pause button to control my movie animation?
View 2 Replies
Mar 7, 2012
I have multiple movie clip with bg sound.I have used the code AS3 for toggling the animation ( Play & Pause ).Automatically the animation starts and button also togggled on click but couldnt control the animation .I need some solutions like when the intial stage the animation wont start etither the button click to play.After that the flow as it is in action ( ON Click ).
btns.visible = false;
btns.addEventListener(MouseEvent.CLICK,onEl);
dfr.addEventListener(MouseEvent.MOUSE_OVER,onEls);[code].......
View 6 Replies
Sep 17, 2011
I have found a generic recursive loop that stops/pauses all child movieclips. If I change stop to play in the code, it plays all child movieclips simultaneously. I want it to resume only one animation at a time. I want a generic recursive loop that resumes animation from last position (position it was paused) irrespective of whether I have paused on the main timeline animation or animations within child movieclips or animations within grandchild movieclips. (I have animations on main timeline, animations within lastFrame MC of maintimeline, and again within last frame MC of child's timeline).[code]...
View 1 Replies
Mar 8, 2012
I have multiple movie clip with bg sound.I have used the code AS3 for toggling the animation ( Play & Pause )automatically the animation starts and button also toggled on click but couldn't control the animation . I need some solutions like when the initial stage the animation wont start either the button click to play.After that the flow as it is in action ( ON Click ). Kindly anyone guide me to solve it. i'm very new to flash. this is my first project and i have to finish it soon..
[Code]...
View 0 Replies
Jun 30, 2011
i'm very new at flash and finally ended all the work i wanted to do here. now i just need to had the actions so it will run properly. basically i just need it to stop in each frame and run the animation of the movie clip on that frame. if it's i can put the project here so you can see what and were i need to had the actions.
View 1 Replies
May 26, 2010
I'm still struggling with going from a loaded swf to the next frame in my timeline, where a new swf file will be loaded.Ths is my current code which is trying to move onto the next frame in my timeline is located at the end Frame of a 10 second animation:
[Code]...
View 3 Replies
Jul 26, 2010
I am making a frame by frame animation, where I draw a character, make a new frame and use the onion skin to slightly move my character. Is there a way to make a certain part faster than others? I made a character prepare to kick someone, but since i was doing it frame by frame it looks slow. So instead of taking out frames and making it look choppy, how do I make a certain part faster or increase its FPS? I tried making a new scene and changing its FPS, but that still changes the overall FPS.
View 6 Replies
Nov 19, 2010
I have an problem whereby I have created a Frame by Frame dancing human figure and now I want to move it across the screen as well as scale it using a Tween.
I have spent quite some time slightly adjusting the upper arms, forearms, hands, legs etc and creating a new keyframe for each movement. All the movements are all in one layer... ie the forearm doesn't have it's own layer etc. I am running the animation at 24fps so there is quite bit going on.
I now realise that I should have created a symbol/movie clip from the first image I created and then scaled and moved the image first before animating it's limbs but I only realized that after hours of work and I would hate to start all over again.
So basically what I have is a dancing human figure in the one spot moving it's arms and legs and I want it to move across the screen and become larger by scaling it using a Tween. I could of course re-edit each keyframe by slightly scaling and the slightly moving the figure but that will take quite some time to get right as there will be a fair bit of trial and error doing it that way.
View 3 Replies
Feb 22, 2011
I have a project that involves flash animation- almost movie like. I need some advice on how to do flash animation. I think I'll create the graphics in illustrator. Basically, the storyline is this:
- guy leaves house and walks to car
-starts engine, puts on shades and speeds off
-scenes of downtown chicago (nightlife)
-view license plate
What is the best way to do this? create graphics in illustrator for frame by frame? Should I use after effects? The client doesn't have a high budget so video is out of the question.
View 1 Replies
Aug 10, 2007
The video plays through to the end and then goes to an url which is the main page, however it flickers up a black screen inbetween the first page and the following one. All I want this to do is either replace that black screen with an image or pause the last frame so there is no flicker.[code]...
View 9 Replies