i want to creat a script that if my movie clip is idle for 5 seconds (or some period of time) with out someone moving there mouse over it, that it returns back to the original state.
View 6 RepliesI made two movie clips that follows the mouse but I want to put constraints on them, they should follow the mouse until the mouse reaches a certain distance and then the movie clip should pop back to its original x and y position.
Code:
private function init():void
{
addChild(backgrnd);
[code]....
I created a movie clip, an aircraft compass which rotates till the button is pressed but I would like it to return back to its original position in opposite direction of smooth rotation and stop. I already have the following script on the clip.
onClipEvent(enterframe) {
if(spin) {
_rotation -= 2;
[Code]....
I have a clip that rotates to orient itself towards the mouse when the mouse is over a given area. When the mouse leaves the area, the clip snaps back to its original position.
1) the clip snaps directly towards the mouse at the moment the mouse enters the clip; I would like it to actually rotate;
2) the clip snaps directly back to its original position when the mouse leaves the clip; I would like it to ease back into position.
[Code]...
The title pretty much sums up what I am trying to do: I haven't started digging into using script in Flash yet, still being very much a beginner.
I created a simple file using movie clips nested in buttons so that when I mouseover a letter, it bobs up and down, but I can't work out how to make it return to its original "up" state *smoothly* when the mouse is moved away. If it must involve script please be aware I am a total noob!
the problem is that when i click on another link i.e. "Home"...i have an outro that plays.it is a mask that covers all the buttons and creates a wipeout effect. but you'll notice right after you click the link the buttons return to their original opacity. is there a way to have their current opacity stay so that they don't return to original when the wipeout occurs? the code is fairly simple. each rollover button(movie clip) has the following code.
//stop();
this.onEnterFrame = function() {
[code].....
I m making a wbt where i want to display a message box if there is no interaction for some time (lets say 2 min). The scenario is there will be some voice over & text which ask the user to click on smthng or drag & drop intr. so i need to check once the voice is over whether student has done some interaction or if its in idle state. if state is idle then display some text box or message asking user to click or something.
View 2 RepliesI'm developing a touch-screen Flash application for a shoe store, and it runs fine initially, but slows down toward the end of the day. I've been diligent with removing event listeners and so on. I've now narrowed the problem to be very specific - it's one section of the application causing the problem, and one part of that section:
- I have a main movie clip which contains the animation, which itself contains 5 nested movie clips, each with their own timeline. All movie clips have a stop action on the final frame. images are transparent PNGs with outer glow "filter" - the issue is not with performance as such, but with CPU increasing over time. Each time you play the clip, there is a small amount of CPU usage that 'sticks' and doesn't get freed up. What happens is that if you play the movie clip many (MANY MANY) times, then eventually it starts to slow down. Mac's Activity Monitor shows that the idle CPU usage is increasing slowly, over many times of playing the clip. It's insignificant with each play, but adds up over time.
You may be inclined to say: oh filters effect CPU, so it will be slow - but it isn't slow until it plays many, many times. Initially it's fast. I've uploaded a .zip with .app and .exe versions of my problem section. There are two files of each type: AutoPlay.app (& .exe): plays the problem clip repeatedly (I've just removed the final 'stop();' frame), so you can leave it open and come back in half an hour to see it slowing down.
ClickToPlay.app (& .exe): Plays the problem clip once when you click the 'play' button, so you can click several times, let it return to idle, and verify that the idle CPU usage is in fact increasing.
[Code]...
I have several movie clips on the stage. They are draggable. I want to be able to drag the movie clip, then when it is dropped, a copy of that movie clip will appear where the first one had been, and the first one will just stay where it is on the screen.
However, I'm running into problems with the syntax.
Here is my current code:
[Code].....
How would i make it so when the user is moving their mouse the mouse is visible. But once it stops moving for about 2 seconds it turns invisible (and visible again once the user moves it)?
View 2 Repliesi curious how to access state in flex "Current State" from flash movie clip??..so far i make movie clip in flash and it has button inside with name " button" and i put this flash file into flex in "state 1" flex application..i want to make event handler for "button" that trigger changing state from "state 1" to "state 2" in flex application..and in flex application i do not write anything because i have no idea how to deal with this stuff..
View 1 RepliesI'm an actionscript beginner and am trying to create a flash file with a button that allows to user to swith from viewing my movie in their browser, to viewing it full screen.I've managed to source some code from the net, and although when I click my 'toggle button' the full screen works perfectly...when I click it again the flash file returns to the original browser window but I dont see my movie - just my back ground fill colour.The code I have is as follows (and is placed on frame 01 of my actions layer)
fullScreenButton.onPress=function()
{
if (Stage.displayState=="fullScreen")[code].....
I'm new here and it's been a while since I've used AS I'm trying to create a MC inside another MC
[Code]....
The code mostly comes from a tutorial I found where the demo works fine. Just my code seems to not stand up to the test
I have made a number of Flash banners and I save them and everything is good but when I open them, some of the movie clips have reverted to a previous state. So I need to resize and redo thsoe movieclips. I make one banner and then save as new file and resize it. It is really annoying.. I am on P.C. and have all the current updates installed.
View 5 RepliesHow do I create a easy script for vertical links, which when pressed, the link moves up and content comes inbetween the link and the rest of the links. I also need it so if another link is clicked the previous returns to its original position.
View 5 RepliesI wouild like to Play a movie clip in a movie like once every 120 seconds. Are there actionscripts whichs does this? Using Flash MX....
View 3 RepliesI've come into a situation where I cannot use a normal button. Instead I must make a Movie Clip which acts as if it was a button.
View 14 RepliesUsing Flash CS3 and as2.
I'm trying to get my movie clip to appear after 1 second then disappear after five seconds.
In it's class action script file I have this code which should remove the clip 5 seconds after it loads:
class monktainer extends MovieClip
{
function destroy()
{
[Code].....
I'm just creating a simple navigation bar. When you scroll over a button (in this case "cai_btn") the other buttons drop to the bottom of the screen. But when I try to run this script the items drop to the same place and overlap. They also don't return to the original state, they move in the right direction, just completely off screen. Here's a link to what it does now: [URL]
[Code]...
I am trying to have colorTransform work on MouseOver and MouseOut I can get it to work problem is I want it to go back to the original state of the button,
C
// This line defines a variable of type ColorTransform and naming it colorTransform
var colorTransform:ColorTransform = new ColorTransform();
[code]....
I have the code below and am trying to set up a "reset" button that takes all the buttons back to its "up" state or original state. And I can't seem to get it to work. The last selected button remains in its "down" selected state.
This the code that sets up the buttons' up/down/over/out states:
var selectedButton:MovieClip = null;
setupButton( one_btn );
setupButton( two_btn );
setupButton( three_btn );
setupButton( four_btn );
[Code] .....
I've got button made from movieclip1) I don't get the MouseEvent.MOUSE_DOWN or CLICK?2)If I click my button either
Code:
btn_BMC.addEventListener (MouseEvent.MOUSE_DOWN, buttonClick);
btn_BMC.addEventListener (MouseEvent.CLICK, buttonClick);
[code]...
How can i remove a movie clip after 10 seconds when it was called
View 1 RepliesI'm making an app with pages set out as classes which extend the MovieClip class.
What I've got are back buttons and different pages which go to the same page, however... If I end up going out of a page and back into a page (specifically one with drawn squares and dynamic text boxes called from a web service), it seems to have kept all of the original information.
So far I've tried killing all of the children with a while loop targeting the index and also using weak event listeners - neither is working!
I added a child (addChild(myCllip) ) and then i change properties of other movieClips inside it then i remove it.
My problem is that when i addChild it again i remains the same when i removed it.
Its there a way to reset the to the original state of the movieClip when i addit again?
i created a functionality for minimizing and maximizing it (on the stage only)by keeping the whole application in a movie clipand then animating that movie clip on press of a buttonnow the issue is thatwhen i reverse the playback of timeline(to expand the application)it expands in its initial statebut i want it to remember the last state of my nested movie clip(10 lvls of nestin ) and expand in in that state.
View 4 RepliesI'm trying to highlight the current 'page' / movieclip by showing the onrollover state in navigation display/button.So the colour remains the onrollover state (in this case blue) while the particular movie clip/'page' is displaying. Changing when the user rolls over another button.I have two issues:1. I understand I have to place the button within a movieclip and have been experimenting with button '02' in the attached example.fla - however now I have done this the original action contained within the movieclip instance myScreen_mc is no longer working.
View 3 RepliesI use FlashMX and made a basic flash movie with one movie clip. (movie clip contains frame by frame animation using images rendered at AE) How can I make the movie clip stop after a specified number of seconds? Client wants to be able to change the seconds when needed. So a text file along with swf file including number of seconds...?
View 2 RepliesI use FlashMX and made a basic flash movie with one movie clip. (movie clip contains frame by frame animation using images rendered at AE) How can I make the movie clip stop after a specified number of seconds? Client wants to be able to change the seconds when needed. So a text file along with swf file including number of seconds...?
View 2 RepliesNeed to usually use actionscript to do alpha and tint fade? or Just use the properties tween control? Iheard that using actionscript will be better as it will not lag if the user's computer is slow. Here is to get a better idea what i'm trying to achieve using tweening. [URL]. To Alpha fade in, white tint fade in and then fade out white tint to original state. I know how to script the alpha fade in but I have problem with the tint fade.
View 4 Replies