I am trying to have colorTransform work on MouseOver and MouseOut I can get it to work problem is I want it to go back to the original state of the button,
C
// This line defines a variable of type ColorTransform and naming it colorTransform
var colorTransform:ColorTransform = new ColorTransform();
[code]....
I'm just creating a simple navigation bar. When you scroll over a button (in this case "cai_btn") the other buttons drop to the bottom of the screen. But when I try to run this script the items drop to the same place and overlap. They also don't return to the original state, they move in the right direction, just completely off screen. Here's a link to what it does now: [URL]
[Code]...
the problem is that when i click on another link i.e. "Home"...i have an outro that plays.it is a mask that covers all the buttons and creates a wipeout effect. but you'll notice right after you click the link the buttons return to their original opacity. is there a way to have their current opacity stay so that they don't return to original when the wipeout occurs? the code is fairly simple. each rollover button(movie clip) has the following code.
//stop();
this.onEnterFrame = function() {
[code].....
I am trying to reset the state of a bitmap back to its original state after I transformed its color.
[Code]...
I have the code below and am trying to set up a "reset" button that takes all the buttons back to its "up" state or original state. And I can't seem to get it to work. The last selected button remains in its "down" selected state.
This the code that sets up the buttons' up/down/over/out states:
var selectedButton:MovieClip = null;
setupButton( one_btn );
setupButton( two_btn );
setupButton( three_btn );
setupButton( four_btn );
[Code] .....
I'm making an app with pages set out as classes which extend the MovieClip class.
What I've got are back buttons and different pages which go to the same page, however... If I end up going out of a page and back into a page (specifically one with drawn squares and dynamic text boxes called from a web service), it seems to have kept all of the original information.
So far I've tried killing all of the children with a while loop targeting the index and also using weak event listeners - neither is working!
I added a child (addChild(myCllip) ) and then i change properties of other movieClips inside it then i remove it.
My problem is that when i addChild it again i remains the same when i removed it.
Its there a way to reset the to the original state of the movieClip when i addit again?
I made a gallery in flash. I have external images load in a fixed display area -- I call it 'imageStage'. When the image is loaded, I resize the movieclip at the _x and _y to make the image fit the stage.
But what happens -- when I flip prev/next through a couple images, they keep shrinking and shrinking. Images that are smaller than the fixed area are being shrunk even further.
I'm thinking maybe if I clear the existing image from the MovieClip, it will reset itself back to regular size and proportions. But I don't know how to go about it.
Have a check on this website..
[URL]
I have been looking everywhere for this kind of scroller bar..
Need to usually use actionscript to do alpha and tint fade? or Just use the properties tween control? Iheard that using actionscript will be better as it will not lag if the user's computer is slow. Here is to get a better idea what i'm trying to achieve using tweening. [URL]. To Alpha fade in, white tint fade in and then fade out white tint to original state. I know how to script the alpha fade in but I have problem with the tint fade.
View 4 RepliesI have a movicelip that has a cirlce with a gradient fill. When I rollover I use a color transform to change the color. I'm not sure how to get the color transform to return to its original gradient fill once I roll out of the movieclip
var overColor:ColorTransform = new ColorTransform;overColor.color = 0xffcc00;
mc1.addEventListener(MouseEvent.ROLL_OVER, buttonOver);
function buttonOver(e:MouseEvent):void{ mc1.transform.colorTransform = overColor;}
Trying to build a drag and drop navigation, all the drag and drop works great, the test for the hit works ie if its on the target it centers the drag clip over the target, if its of the target the drag clip returns to its start postion. What I cannot get right is the code to check if the target already has a clip on it, if it has that clip needs to return to its start position, so we only ever have one drag clip on the target.
[Code]...
I have an enter_mc with arrow_mc (ie. which is ">>") at the end. When I mouse over enter_mc, i want the arrow_mc to bounce back and forth. the problem is when I onRollOut, the yoyo is not stopping and I can't get it to return to the original position either.
[Code]....
Trying to build a drag and drop navigation, all the drag and drop works great, the test for the hit works ie if its on the target it centers the drag clip over the target, if its of the target the drag clip returns to its start postion. What I cannot get right is the code to check if the target already has a clip on it, if it has that clip needs to return to its start position, so we only ever have one drag clip on the target.
Code timeline:
Initialize vars
left = 10;
right = 500;
top = 10;
bottom = 380;
speed = 10;
targetX = targetSpot_mc._x;
targetY = targetSpot_mc._y;
[Code] .....
i want to creat a script that if my movie clip is idle for 5 seconds (or some period of time) with out someone moving there mouse over it, that it returns back to the original state.
View 6 RepliesI have a video clip which I initially set a size and location to. I then re-size the clip and move it when a button has been pressed. Once the video has finished playing, the video clip should go back to the original location and size. For some reason though, it goes back to a different location though.[code]...
View 0 RepliesI have a movie in which I have several squares that are pushed away once you mouse over them, this is achieved with some action script. What I need to do is once the viewer leaves the flash window where these squares are housed, I need them to go back to their original state, or the state in which all of the square line up against each other and do not break up because of the the mouseover effect.
[Code]....
I am trying to recreate an effect like the clouds on[url]...I would like to be able to click and drag on an object then once mouse is released the object would dynamically return to start position. I am struggling to get my script (AS3) to dynamically return it to original location.
View 1 RepliesI have an exit button on my movieClip that sends a trigger that removes the movieClip it is contained in off the screen. That works fine. The when that movie clip is put back on the screen, the Button is stuck in the OVER state.
View 9 RepliesI am trying to recreate an effect like the clouds on [URL] I would like to be able to click and drag on an object then once mouse is released the object would dynamicly return to start position. I am struggling to get my script (AS3) to dynamicly return it to original location.
View 2 RepliesThe title pretty much sums up what I am trying to do: I haven't started digging into using script in Flash yet, still being very much a beginner.
I created a simple file using movie clips nested in buttons so that when I mouseover a letter, it bobs up and down, but I can't work out how to make it return to its original "up" state *smoothly* when the mouse is moved away. If it must involve script please be aware I am a total noob!
I'm trying to create a set of 4 vertically arranged buttons that 'split' apart when those buttons are pressed. For example, if you click the topmost (1st) button, the bottom three buttons will drop down so submenus (for the 1st button) can now be revealed beneath. Again, when you click the 2nd button from the top, the bottom two buttons drop down, revealing submenus, and so on.
Now, is there a way that I can use actionscripting to tween the buttons to not only motion tween a drop down when a button is first pressed, but also to motion tween the button to return up to its original spot when another button is then pressed? Right now, I have two keyframes, side-by-side which each containing a different y-scale value for an object. Can I do some actionscripting to get the object to motion tween upward to its original spot instead of "clicking," or snapping back to is original spot when another button is pressed?
I've put together this simple code for an SWF with three roll over images (called: Training, Resources and Contact).When I roll over Training I would like the symbol Training_txt to tween its alpha to 1 (from 0) and tween its y axis to 220 (from 83).When I roll out of Training I would like to run the two tweens in reverse.
This works fine for each of the three roll over images, so long as each tween is allowed to fully execute before a new tween is started. The problem arises if i quickly move the mouse curser between the three roll over images before the previous tweens have finished executing.In this instance, the tweened objects start to behave erratically. They usually return to their original position as per the roll_out tween but then start jumping between y axis 200 and y axis 83 (without tweening - they just appear).
Code below -
stop();
import fl.transitions.Tween;
import fl.transitions.easing.*;[code]..........
How is it done? All I've seen on the web is how to change the color. Well how about going back. I'm talking about a MC with many colors. I can't just change back to a single hexadecimal color.
I can accomplish the change as it passes over a frame, but I can't get it to change back.
In the frame is this:
Code:
cHurtColor = new Color(_root.compMC);
cHurtColor.setRGB(0x00FF33);
All I've seen on the web is how to change the color. Well how about going back. I'm talking about a MC with many colors. I can't just change back to a single hexadecimal color.I can accomplish the change as it passes over a frame, but I can't get it to change back.[code]
View 6 RepliesI have a flash map that contains 51 movieClips, one for each state.Sample instanceName for a state (Alabama) would be: S_01
I have a XML record that contains specific info for each state.<stateID>01</stateID
I am trying to link the stateID's in the XML record to the state movieClips that make up the map.var stateInstanceName = 'S_' + stateID;
I was just trying to do a simple trace command to see if I could pull the _width of each state clip to see if I was linked up:
trace(mapInstance.stateInstanceName._width)
It's my understanding that view states can be useful when switching the layout of design elements. Such as, a loading page as one state and the main application design in another state. Is this the correct use of them? Additionally, I have a label in State1 and I cannot figure out how to access that label via actionscript. labelID.text = "New Text"; is not working.
View 2 RepliesI need to add a rollover effect to the disabled state of a Spark button. This way, users can rollover the button and know why the button is disabled.I think I would have to override ButtonBase's getCurrentSkinState. Is there anyway to test if a mouse cursor is over a disabled button?
View 1 RepliesI'm using Flex 4.5 and trying to take advantage of the new state groups feature. I have two States (call them readType1 and readType2) that both belong to the same stateGroup (call it readOnly). There are several places where I'd like to do something based on the current state, and it would be the same thing for the two read states. [code]...
View 1 RepliesIn my air project i used current state size is width="441" height="358" . i have link button like Singin then move to singin state (currentstate='singin')
<mx:State name="signin">
<mx:SetProperty name="height" value="616"/>
<mx:SetProperty name="width" value="919"/>
So application resize into 616,919 . After that function finished move to current state like(currentstate='') But size not be changed . How can i set the size for current state?