I promise this is my last question regarding the XML nav you guys made I want the navigation to expand onRollOver not onRelease. When i change it it doesn't work, why not? This seems so simple but yet it won't work here's some code
Code:
mySubButton.onRollOver = function() {
getURL(this.myUrl, this.myTarget);
trace(this.buttonLabel.text+" : "+this.myURL);
[Code]..
I have two buttons. Each one calls in an external swf. I would like one of them to call it in onRollOver but nothing happens. It works fine when I change it to onRelease.This is the code I have for the two.
Code:
// Instantiate MovieClipLoader Class
var thumbloader:MovieClipLoader = new MovieClipLoader();
case_btn_1.onRollOut = function() {
[code]....
I have two buttons. Each one calls in an external swf. I would like one of them to call it in onRollOver but nothing happens. It works fine when I change it to onRelease.[code]
View 1 Repliesi have this code setup in a frame and after jumping to another frame i would like to remove it because its not needed there. actually its in my way.the mymc is on one layer with only one keyframe at the beginning and then just frames till the end of my timeline. i attach the mcs dynamically to mymc and then setup my actions on another layer frame by frame, as needed.in this specific frame i don't want the mcx's to react to mouse events.[code]
View 2 RepliesI have some code similar to this:
Code:
mc1.button.onRelease = function() {
//do stuff
}
mc1.onRollOver = function() {
[Code]...
I want a transparent movie clip that displays a tool tip when you roll over it. Beneath that movie clip I have other movie clips that I want to be clickable. Unfortunately having the "onRollOver" event on the top layer movie clip blocks the "onRelease" events of the lower movie clips. If I move the smaller movie clips on top it will work but I have to setup a tool tip for each of them (and it disappears and reappears when I move from one MC to another). I also thought about using the "onMouseMove" event and doing a hit test, but that seems less efficient.
View 4 Repliesi have a movieclip that is working as a button. onRollOver the moveclip goes to frame 2 where the submenu appears. Here is where the problem starts.The submenu buttons use hitTest for their animation. I want to be able to click one of the submenu items and use
[AS]
button.onRelease = function() {
getURL("Home.html","_self")
}
[/AS]
To make it link to a different site. The problem is it just doesn't seem to work.I think the problem is when I try to click on the submenu buttons, since they are nested in a movieclip that already uses onRollOver, it isn't recognizing i am clicking on the subbutton. I used onRollOver instead of a HitTest for the main buttons because if it used HitTest several popup menu's would show up at a time, so that is not a solution.
Basically, does anyone know how to make it so i can have a movieclip nested in another movieclip where the parent uses onRollOver and the sub movieclip uses OnRelease. Whenever i try to do it the sub just doesn't work.
I need a rollover function and so I changed onRelease to onRollover but the rollover effect then doesn't work.
- Script is on seperate layer (on root)
- hit_mc is the movie clip on which the rollover should work
- mask_mc is the one that should tween when mouse goes over hit_mc
hit_mc.onRollover = function() {
tweenBall(mx.transitions.easing.Regular.easeOut);
};
[Code]....
My setup has several movieclips in different layers. My problem is that .onRollOver, onRollOut and .onRelease functions are still active for movieclips lying underneath. Is it possible to inactivate these functions and then activate them again when it is needed? Or how do I solve this?
View 2 RepliesNot sure if it is just me, but I cannot seem to find any other menu out there that functions like the macromedia menu. I am building a navigation for ford.ca and the client wishes the navigation to behave like the macromedia site. MM site nav has some sort of delay that is triggerred before the rollover function fires, as well it detects when the mouse stops moving before firing. Take a close examination and you will see this.
View 1 Replies// This is an array, a list of the buttons used. var myButtons = [this.myButton_1, this.myButton_2, this.myButton_3, this.myButton_4]; // Loops on all buttons from the first to the last one for (var i=0; i<myButtons.length; i++) { // When the mouse rolls over this menu option... reduce size just a bit. // NOTICE: I'm not taking into consideration the problem of having the hit area going down and "moving" the // mouse area and out of the button (possible rollover flicking). This is just a simple example afterall.
[Code]...
In the above instance how would I address the problem of flickering? I think want to apply the .onRollOver to an invisible button instead. How can this be done? Im just getting started with tweening animations outside the timeline with MCTween
I am making a navigation for a site, and the client wants a box behind a menu item to show that it is the active option. He wants that box to move to behind the new option when selected. So my navigation goes along the x axis; home contact about etc. Initially the box, which I have given the instance name 'tab' is behind 'home' as its the homepage.
So by clicking on say, the third option, the box will move from home to the third option, and say the user then clicks the second option, the box is to move to behind that. I got 4 navigation items, all are buttons, all on their own layer with the box being on its own layer too (obviously below the layers for the buttons so it appears behing the menu item).
I thought it would be quite simple, have some code which effectively says:
buttom1.on(release) {
tab.moveto(x value, 40);
}
I'm trying to make a menu that has onRelease buttons on top of onRollover buttons (the onReleases are on a separate layer from the onRollovers). The onRelease buttons take the user to different urls, and the onRollover buttons are supposed to allow different parts of the menu to appear.
The onRelease buttons work fine, but I can't get the onRollover buttons to work consistently. Sometimes the onRollover buttons will correctly advance to a different frame, and sometimes they "stick" and do not advance. The script has no errors and I've tried changing the sizes of the onRollover buttons (in case they were too large and the cursor was hovering over more than 1 at the same time), changing the order of the code for the onRelease and onRollover commands (in case the onRollovers were being superseded by the onRelease commands), and countless variations of the layers and frames.
I'm sure that you'll want to see the script, but I don't think that pasting it all on this post would be reasonable? So I've put the .fla and the .swf on this page for reference: [URL]
I have a movieclip that shows an animation onRollOver and an animation on RollOut but onRelease the animation enlarge itselfs but now when I'll roll out when the animation isn't open (so i didn't release) the animation plays the animation for the minimizing of the animation. Here's my code (I know its a bit amateuristic but I'm not a programmer )
[Code]....
i have been using AS2.0 for quite a long time. And i started using papervision3D too.I am using tutorial made by Lee Brimelow's cube tutorial. but i want different results. So long i am able to move the cube in one direction and that is my requirement. But in his tutorial he as link to urls. what i want is to expand one face of the cube which is clicked to expand to fit in the screen.(i am also using fullscreen and stage resize).
View 1 RepliesI have a movieClip, which in turn has a nested movieClip. I need each of these to have thier own onRollOver events, the parent movieClip is OK, but the event never fires for the nested movieClip. My code goes something like this:
[Code]...
is output when mcOne is rolled over, as it should, but nothing is output when mcTwo is moused over.
Is there a way to ADD onRelease method on movieclip that already has a onRelease method? Without replacing the first one.
ActionScript Code:
mc.onRelease = function(){
trace('1');
}
I was thinking this, but it doesn't work
[Code]...
I have been searching online to figure out a way to expand images on rollover EXACTLY as is show on this site (skip intro to see what i mean)does this involve AS or just simple tweening.
View 8 RepliesIn a Flash AS3 app I'm building I have 3 MovieClips on stage that I can drag and drop when dropped they're supposed to expand and 2 of then do but the one with the google map practically disappears.
[Code]....
Is there any function that allows to do this? Say I have an swf that is 400 pixels high and i add some content into it that is say 600 high, can I expand the whole swf's height to fit this new content or is using a scrollpane or something the only way this can be done?
View 14 RepliesI have built in some accessibility to one of my flash websites where you can increase the size using a Combobox - the problem is when I expand it to font size 18 the font obviously goes over the textfield and the scroll bar doesn't increase to compensate for this![code]...
View 5 RepliesI am very new to Flash and would like to find some way to have a movie expand from the page and open larger. I have tried having it open in another window, but that looks cheezy. It would be great to have it sitting in the page (right now it is 375 X 280) and then when someone clicks on the video it opens, without any borders, just viewer, to 900 X 675. I have looked online at various players, but none do anything like this. There has to be a way to make this happen. Right now I am using Dreamweaver CS3 and just using the embed player that is part of Dreamweaver.
View 2 RepliesI have a very long series of images ~ 3000 pixels wide total that I want to put in flash but the work area is way too small and the objects just get pushed off the side of the screen.
View 2 RepliesI've got Javascript expanding the swfobject height (here), but the actual flash stage height is stuck at 60px. What's involved in changing the stage height?
View 6 RepliesResizing the stage seems to expand to the right and down. There a way to re size from the bottom to up?
View 1 RepliesUsing a large amount of formatted text, is it possible to make titles or headlines within the text clickable? Once clicked, the portion of text would expand and collapse accordingly. The text field would likely include around 80 headlines. I found code to show/hide a string of text, but not formatted tlf text.
View 5 RepliesI have created a tree with a custom treeitemrenderer where I have added a textinput box next to each label. My data provider is an ArrayCollection. When I enter value in the input box, I can see the value fine as I expand or collapse the tree using the disclousure arrow. There is a strange issue when I try to expand and collapse tree from the mxml page with a button click to expand and collapse tree using the following code.
The problem is as I expand or collapse tree, the values I entered in the input boxes appear to be moving.
For example, I have entered 15 in input box 1. When I expand and collapse tree, 15 moves to another input box, and moves to another, and then it moves back to where it was entered as I keep expanding and collapsing the tree. I am still learning Flex. I am not sure what is happening, it is something to do with arraycollection.
[Code]...
I am creating a site in flash that is reading in entries from a database. I want the swf to expand downward on the html page so the user can use the browser scroll bars to see all the content. I don't want to paginate everything into a 800 px high swf or something - I want the page to expand just like it would if it were html
View 1 RepliesExpand a row of AdvancedDataGrid without using HierarchicalData?[url]...
View 2 Repliestalking about this loader: var loaderName:Loader = new Loader();
I have an image inside of it and when i try to scale its width and height its scales from the top left.
how can i make it scale from the center?