Code:
import caurina.transitions.Tweener;
import mx.transitions.Tween;
[code].....
is it possible to add a delay to this yoyo tween, and then once it has tweened the y position on both mc's pause the tween, and get it to restart?
I have a tween in my .fla that isnt working properly. I have 2 buttons, Start and Yoyo. When I click the "Start" button the tween runs. Clicking the "Yoyo" button play the tween in reverse. All fine, but when I press the "Start" button again after I've ran the animation twice the animation always run in yoyo mode. What my problem. Code:
import fl.transitions.Tween;
import fl.transitions.TweenEvent;
import fl.transitions.easing.*;
[code]......
I am wanting to stop this yoyo movement when a sound stops.
This is not all the code but the important parts:
I DECLARED THE VAR OUTSIDE OF THE FUNCTION:
var BB:Tween;
........
function BounceBeau()
{
[Code]....
I want the tween to end when the alpha and the _x tween go back to the beginning. here is my code
import mx.transitions.Tween;
import mx.transitions.easing.*;
var xScaleT:Tween = new Tween(kText, "_x", Back.easeOut, 0, 476.7, 3, true);[code].......
I cant stop the code without interuppting the reversal of the tween.
I recently tried using a tween on a graphic to be used when I click a button but for some reason when I go to use the yoyo tween option it gives me this 1120 error code.
ActionScript Code:
/*--------------------------------------------------
Tween variable to ocillate the DVlogo at the
[code]......
import fl.transitions.Tween;
import fl.transitions.easing.*;
var homemanTween:Tween = new Tween(homeman_mc, "x", Elastic.easeOut, 1000, 50, 3, true);//frist tween
var adobeTween:Tween = new Tween(adobe_mc, "alpha", Regular.easeOut, 0, 1, 3, true);//second tween
how can I animate the 2nd tween after 3 seconds when 1st tween stops.
I've been looking for a way to delay a Tween using the AS3 Tween class instead of Tweener, Tweenlite, LMZ, etc. Most of the responses I've found declare Tweenlite the easiest and requiring the least amount of code. I finally found a solution for the Tween class:
Code:
// the masking code;
import fl.transitions.Tween;
import fl.transitions.easing.*;
var twn:Tween = new Tween(my_clip,"width",Regular.easeInOut,1,300,1,true);
twn.stop(); // stop the tween right away,
setTimeout(twn.start,1000); // start the tween after 1 second;
And that's it. I wanted to share. One of the challenges I face in my agency is handing off code to someone else who doesn't have any of the tween libraries installed so I have to walk them through it. The Flash Tween Class is not so bad, if you ask me.
I coded a website menu to xscale each navigation item for 1.5 seconds when you rollover it. The problem is if you place the cursor on the edge of the item it repeats the xscale tween over and over again. You can view the nav at [URL]. Is there a way to set a delay between tweens so it diesn't start the next tween until the previous is finished? I tried adding a delay but it only performs the tween once.
Here is my code:
bannerservice_mc.onRollOver = function () {
if (tweenDelay != true) {
var scaleBannerRolloverService:Tween = new Tween(bannerservice_mc, "_xscale", Elastic.easeOut, 50, 100, 1.5, true);
tweenDelay = true;
[Code] .....
I have a number of cases where I have a tween happening in ActionScript, but I would like it to happen after a delay from the event that triggers it. At the moment I'm creating this delay by having a tween that does nothing (eg. an "_x" tween for which the start and end points are the same) and then using tween1.onMotionFinished = function(){to create the one I really want. Is there a way to create this delay more neatly?
View 1 RepliesI use laco's tween class for a button color fade. A bit like on the Laco navigation itself : [URL]
It works, only, when the mouse moves a little too fast over the button, it delays, like the mouse didn't went over that button, what gives a pretty annoying effect, like a bug... this is the code I use :
menu1.onRollOver = function ()
{
this.colorTo (0xFF0099, 0.1);
}
[Code].....
I am having trouble figuring out the best way to delay a tween if a mc is still tweening? I tried setInterval but couldn't figure out how to make it work at least in this context... i have several functions that might be causing the slider_mc to be tweening at any moment (including this one...), and i need the buttons to respond (eventually) to the users press even if they hammer it... but if they do the tween gets interupted and starts from some uneven _x and gets out of alignment. It should only be moved + or - 100 pixels at a time....
[Code]...
I use laco's tween class for a button color fade. A bit like on the Laco navigation itself : [URL] It works, only, when the mouse moves a little too fast over the button, it delays, like the mouse didn't went over that button, what gives a pretty annoying effect, like a bug... this is the code I use :
[Code]...
I am using GTween to tween multiple tweens one after the other (Ex: casino slots). I am tryng to give the effect of reel spinning in casino slots. First, started with two tweens for 3 symbols per each tween, 1 tween will be shown on the screen and other will be added above it which is not shown as the reel shown area is masked. I am trying to add new tweens on completion of each previous tween, but due to the starting delay when each Tween is added, there are showing some gaps between the symbols in reels.
how to avoid the starting delay when a new tween added.
I am new to Action Script. I have created a simple tween letter animation in AS2. There are two letters (a and b) on the stage that I have to animate and display one by one. Now both are displayed at a time. x and y position of each letter also has been set. Can I set time delay between first and second letter? I have attached my fla. file.
ActionScript Code:
import mx.transitions.Tween;
import mx.transitions.easing.*;
a_mc._x = 137;
a_mc._y = 215;
[Code] .....
I have created a simple tween letter animation in AS2. There are two letters (a and b) on the stage that I have to animate and display one by one. Now both are displayed at a time. x and y position of each letter also has been set. Can I set time delay between first and second letter? I have attached my fla. file.
ActionScript Code:
import mx.transitions.Tween;
import mx.transitions.easing.*;
a_mc._x = 137;
a_mc._y = 215;
[Code] .....
I have an enter_mc with arrow_mc (ie. which is ">>") at the end. When I mouse over enter_mc, i want the arrow_mc to bounce back and forth. the problem is when I onRollOut, the yoyo is not stopping and I can't get it to return to the original position either.
[Code]....
I want to create a function based (not frame) delay of about 10 seconds to the function at the start of a flash movie, the code only needs to run once.I'm very new to actionscript and have been given links to SetInterval and SetTimer examples but they all seem to be very complex.The function is below. I believe it's possible to add the commandTimer(delay:Number, repeatCount:int = 0) how me to a simple example.
onClipEvent (enterFrame) {
framePos = int(_xmouse / 100 * _parent._totalframes);
if (framePos < 0) {
[code].......
Now I am using the Tween Class to move some boxes in my movie, now I can move the first mc and then another mc after the first tween has finished with onMotionFinished but I was hoping someone could help with how do I start the second tween when the first mc has passed a certain _x coordinate. ie starting the second mc moving while the first tween is still moving.
View 1 Repliesi am wondering if there is a way to put a delay (seconds) on the flashs' native tween class like you can on the laco tween engine... such as
[Code]...
If i have a clip with a bunch of stuff inside it (on layers) like other clips, bitmaps, etc. and perform a tween on that clip (via tween class), the stuff inside the clip seems to alpha at different rates.
For instance, i have a clip with an empty movieclip which loads a bitmap image and on top of the bitmap image, i have a gradient feathered edge (.png) bitmap and on top of that I have some dynamic text (embedded fonts).
The bitmap is supposed to create a feathered edge on the photo but since they alpha at different rates, you always see the hard edge of the photo...
is there a solution like cacheAsBitmap which would let the whole clip alpha at once? If it's cacheAsBitmap, i must be using it incorrectly, b/c it's not working!
I will have three seperate pages for the motion tween, mask effect and shape tween... would you make the seperately, in a different scene, as a symbol or on the same scene with the website.
View 2 Repliesmy movieclip button was working perfectly as a motion tween. Can you use shape tweens as movie clip buttons? I just made that change, and kept my code:
[Code]....
I am facing a problem in one of my animation with flash CS4 - I have nested a Shape Tween in a Motion tween to get more control over the easers and effects, unfortunately I am not able to view on the timeline of my Motion Tween the action of the Shape tween nested inside.
It only show the first shape of the Shape Tween during the entire Motion Tween and that is really a problem for me because I need to see the final frame result of that Shape tween to be able to position it in a precise way on my scene according to other instances.
[Code]..
Am trying to use the Tween class to scale and move a movieclip. Now the movieclip is within the loader, so I need the motion to be controlled by the percentage loaded. Now the code to move the movieclip to its final position is:
var xscaletween:Tween = new Tween(mstone, "_xscale", Regular.easeOut, mstone._xscale, 220, 6, true);
But this is the final location, I want to be able to change the properties of xscaletween, yscaletween, xmovetween and ymovetween as per percentage loaded.As in, within this final boundary limit of the tween, I want, for example, xscaletween, to scale only till 140 till percentage hits 50. Is this possible?? If not is there a workaround?Or do I have to use new tweens within each percentage limit?
I am working on to slide a movieclip across the stage.The movie clip is five times the width of the stage and I am using the Tween Class to move it across the stage when a button is pressed.The interaction I want is that when the button is pressed the movie clip moves a certain amount.If the button is pressed again it moves further.The script I have come up with though is taking the movieclip back to the original position of the movieclip and then moving it as opposed to moving it from the position it reached after the first button click.I have tried a few things but nothing is working.The script I am using at present is:[code]
View 5 RepliesI'm making a "master movie" for an assignment and I'm stuck right now. What I've got is an Intro page that will serve at the Parent.swf to load 4 other child swf's upon a mouse click. The problem is I have a theater stage where I tweened an animation to make it appear the curtain on the stage is going up but once it reaches it maximum height....the tween abruptly stops. I want it to HOLD there until a user clicks a button.
How would I make this happen? Here is the page in question: [URL]...
I am trying to understand the thinking behind motion tweening using AS3 (rather than doing it on the timeline).I am trying to create a simple platform game, and while this is simply a learning project, I have an movieclip instance on the stage, and using basic x+5 logic I can get the instance to move left and right on the stage accordingly.Trying to make the instance 'jump' is a bit trickier. This is the code I am using:
ActionScript Code:
import fl.transitions.Tween;
import fl.transitions.easing.*;
import fl.transitions.TweenEvent;[code].....
I thought this code would move the instance from it's current y-position and tween it to it's highest jump point. From here I planned to use a MOTION.FINISH event to tell it to tween back to it's original position.Something strage happens though, rather than tween from the current y position and move up, the instance instantly transforms it's position to y+100 and then tween back to the original position. So it kind of turns out that it is the second part of the jumping action that I want to create.
I am using System.security.allowDomain in both files.The tween in movie2 fails to work when the swf loads from an external domain. However, it works perfectly when this swf is loaded locally. Also strange is that the movie2 tween does work externally if the tween libraries are commented out of movie1.The Challenge: Get both the red and blue boxes to fall when movie2.swf is loaded from an external domain.[code]
View 2 RepliesHow to stop the next tween action to start until the previous tween completes playing in as3.0?and also i want to stop the tween to happen on the same object twice.Basically i have a container (movie-clip) in which there are n number of movie-clips (arranged as bricks). When i click on the container the target (brick) will disappear (made scaleX and alpha to 'o'). also i am tracking how many bricks are closed.But the problem is if i do a fast double click the tween seems to happen twice. and the count also seems to increase for the same brick.
View 3 RepliesWhat I want to happen is, user clicks button, button slides across screen, when the slide is finished frame 2 is displayed. I am getting an Output of:
TypeError: Error #1009: Cannot access a property or method of a null object reference.
at howTo_fla::MainTimeline/howTo_fla::frame1()
and my code looks like:
import fl.transitions.Tween;
import fl.transitions.easing.*;
import fl.transitions.TweenEvent;
[Code]....