ActionScript 2.0 :: Represent A Group Of Cells Multiplying And Dyeing?
Mar 20, 2008
i would like to basically represent a group of cells multiplying and dyeing. I have some data im pulling in, from an xml file and would like this to generate some cells. I have figures that change frequenly, so for example, if the figure increases i would like the cell to multiply and if the figure decreases i would like cells to die off.
If any one point me in the direction of some examples or give me some ideas about the best way to do this i would really appreciate it.
As you can see im not sure if i should be looking at flocking or recursion etc so
View 1 Replies
Similar Posts:
Aug 14, 2009
I've got some MC's in my library that have radiobuttons in them -- all of this created at design time -- and pull them onto the stage dynamically. My question is how do I get the selectedData from the group? The setup is like this: In a MC called pageOne, I have a group of buttons with a group name of Q1, Q2, etc. I pull the MC onto the stage like this:
[Code]...
Do I need instance names on each of the buttons and add listeners to all of them?
View 4 Replies
May 13, 2011
I have this mc that responds to mouseX , only the mc is very short in frames, it's only 25 frames long. This way the mouseX is only the first 25 pixels of my stage, so it only responds to that. Is there any way I can multiply this value to, let's say, 20 times?
View 1 Replies
May 6, 2009
I have an instace of a coin on a table and I want to make it multiply and stack
View 3 Replies
Oct 7, 2010
I have this code:
[code]....
It is called recursively. The problem is the alpha value augments, apparently multiplying itself. Why? I successfully remove the child.
View 5 Replies
Jun 28, 2010
So, I'm writing an AS3 program that tiles floor tiles. I want the user to be to be able to create their own floor schematic represented by different rectangles. It'll be drag-and-drop. They will lay out their schematic (which is composed of different size rectangular tiles) and drop colors/patterns onto them.
This schematic will then be tiled on a 3D plane to represent what the actual floor would look like.
I've got the 3D part working, drag-and-drop working, etc. What I'm missing is the floor schematic stuff. I've spent a lot of time trying to figure out the best solution, but I can't QUITE get there.
Here are some examples (out of a WHOLE bunch of possible combinations) of how the floor schematics could look:
The different tiles within the schematic are the droppable regions. My problem: How can represent these schematics in XML? Don't worry about tiling, sizing, etc. I've got that all figured out already. I just literally do not know how I can represent a tile schematic in XML and draw it correctly with AS3.
View 4 Replies
Jan 20, 2009
I have 4 Sliders that I want to represent 100% of a total Number; Say the number is 100 and you start all the sliders off at 25. Each Slider has a Min of 0 and a Max of 100, to represent 0 to 100 percent of the Total number.So if one slider is all the way to 100% the rest of the 3 are at 0%;
Example: All Sliders are set to 25, and you slide the top slider to the right (increasing) say to 40%; The Sliders should say 40%, 20%,20%, and 20% since it would decrease the rest of the sliders accordingly, so they all add up to 100%;.
View 4 Replies
Jul 12, 2010
Was wondering if there is a script that can mutiply objects over the time line.So for example if one rock appears in frame 1, and then a 2nd rock in frame 2and a 3rd rock in frame 3, etc,But say starting on frame 4, six rocks would appear, and on frame 5, twelve rocks would appear...so that the rocks would appear exponentially for example.The numbers or accuracy does not matter, its more about displaying a number of rocks much faster along the time line, instead of 1 rock/frame.
View 1 Replies
Nov 9, 2010
I have the movie clip "movie" in my library and the button "btn" on the stage.Now everytime I release "btn", I want to add "movie" to the stage and have it play from predetermined coordinates (let's say _x = 20, _y = 20)...So far, I've tried
Actionscript Code:
on (release) {duplicateMovieClip("movie", "movie2", 1);}
but that doesn't do the trick because it doesn't multiply the displayed movies.Everytime you release "btn", "movie" breaks off and restarts,I want it to finish its animation and have ANOTHER one spawn at the origin...
View 2 Replies
Oct 11, 2011
When multiplying a floating point number that is very close to 1 with an int > 0, can it ever be interpreted as 1.
That is, if Math.random() returns its highest possible result (which is 1 step below 1.0), will
(int)(Math.random() * 8)
be 8 or 7?
For a practical example, can this often-used construct give an index out of bounds error:
someArray[(int)(Math.random() * someArray.length)];
I'm specifically interested in answers for Java and ActionScript 3, but I suppose they all use the same rules for floating point arithmetic, and answers for any platform would be useful.
Update: Though I already accepted an answer, I'd still appreciate confirmation that this can't go wrong in ActionScript 3 either, since a colleague reporting that he saw it go wrong once is what partly prompted me to ask this question.
View 2 Replies
Jan 9, 2008
Strange problem, least I think it is I just can't work out how to multiply two text boxes and then display it in another text box. I have tried the following but had no luck should these work thus some other code is messing it around or would non of these work;
box1.text = box2.text * box3.text;
box1.text = number(box2.text) * number(box3.text);
View 2 Replies
Oct 16, 2010
In my page i use animated swf for button. And at the moment page knows how many buttons there needs to be via category nodes in xml so i made a loop to load in the right number of same swf-s. Is there a bettery way to do that like load swf only once and than duplicate it via script? Or something else i did not think of?
View 1 Replies
Jan 5, 2012
I'm trying to make a question game with 30 question divided into 3 dificulties, so i'm using arrays to have my questions randomized but not repetitive.
I made the code use the first parameter of the array (array[0]) then remove it from the array.
So, my array will have no more elements after a time. But, when my array have only 1 element, i cant play this element, and i need to use the representation of the empty array to get it to play.
I'm new on AS3, so this may seem very confusing. Here is the code I used.[code]...
View 1 Replies
Oct 16, 2010
In my page i use animated swf for button. And at the moment page knows how many buttons there needs to be via category nodes in xml so i made a loop to load in the right number of same swf-s. Is there a bettery way to do that like load swf only once and than duplicate it via script?
View 4 Replies
Jan 17, 2012
I have a function that adds the values of an array together and displays the output in a textArea(myText).
The code below works fine, but the output number is "11.5" I need this to be "11.50" and again if we set the array index [1] to "0" instead of ".50" I would need to show "11.00" instead of "11" which is what I am getting now!
var myArray:Array = new Array(1.50,.50,0,9.50); function addValues(myArray:Array):Number{ var arraySum:Number = 0; for (var i:uint=0; i< myArray.length; i++){ arraySum += myArray[i]; } return arraySum } trace(addValues(myArray)); myText.text = String (addValues(myArray));
View 2 Replies
Oct 20, 2011
I am doing the following in actionscript in Coldfusion Flash Forms:
90 / 3.7
Gives me:
24.3243243243243
Whereas the calculator gives me:
24.32432432432432
Note the extra 2 at the end.
So my problem occurs when I am trying to get the original value of 90 by taking the 24.3243243243243 * 3.7 and then I get 89.9999999999 which is wrong.
Why is Actionscript truncating the value and how do I avoid this so I get the proper amount that the calculator gets?
View 2 Replies
Oct 16, 2010
In my page i use animated swf for button. And at the moment page knows how many buttons there needs to be via category nodes in xml so i made a loop to load in the right number of same swf-s. Is there a bettery way to do that like load swf only once and than duplicate it via script?
View 2 Replies
Oct 17, 2010
I have some code here for some falling leaves. I was wondering how it can be altered so there is a delay between a group of leaves falling and the next group falling? also to slow down at the end of the fall? [code]
View 9 Replies
Oct 21, 2010
I want to generate thumbnail image from a flash file,
View 1 Replies
Jun 22, 2011
I have a lot of employee data. Then i want to show to user the data using flash animation.Is it possible to be done with flash animation with delphi ?
View 1 Replies
Jun 30, 2006
i have an some movie clip objects, named A,B,C,D,E respectively. Also, asssumed i have 3 arrrays, globally defined with
Array1={'A','B'};
Array2{"B","C"};
Array3={"C","D",E","B"};
Finally, i have some buttons there, both will be used to trigger the movie clip to change it's alpa value. Now here is the problem, when i click on button1, it will search in Array1, and those elements match the object name will be triggered.For example, i click on button1, and it search Array1, which contains elements A, B. With these elements, it only match movie clip object named A and B only.
So as a result, only these two objects are triggered.
Can you let me know what is the concept to run this? The requirement must use the elements in an array to trigger an object. For more information, i actually need this concept to create a Search Algorithm, such as breath first search and depth first search method. So after it find a solution path from A to B and C, which these similar to array1={"A","B","C"}, so only the node A, B and C will be highlighted, and a line from A to B and B to C is drawn to visually show the path.
View 1 Replies
Feb 25, 2011
I'm working with a Sprite in AS3. Initially, width,height are 0,0 as expected.
After this:
var tf : TextFormat = new TextFormat();
tf.font = "Arial";
tf.size = 48;
[code]....
View 2 Replies
Sep 7, 2011
I'm getting a millisec timestamp in ActionScript as a Number object which can return a primitive double. I'd like to cast it for a backend that expects a primitive long long millisec, however the language does not provide long long. Am thinking a double can be converted to two ints and submitted together. Any encounter something like this and have a solution?
View 1 Replies
Apr 13, 2004
I went to [URL] to turn a GIF image into arrays that represent each pixel. How do I take the code that it spits back at me and display it in Flash MX?
View 2 Replies
Aug 1, 2004
Is the number in a function representing the speed (in case of easing) equal to a certain amount of frames?
View 10 Replies
Mar 29, 2010
I am trying to calculate the values on user entered text fields (which only accept numbers) along with the values of user selected combo boxes. I have a function to a button:
reviewQ.calcBtn.addEventListener(MouseEvent.CLICK, calcAns);
function calcAns(e:MouseEvent):void
{
reviewQ.calcAns_text.text = "Your calculated result is " +
[Code]....
Right now, all I am getting is the actual values entered in the text fields and selected in the combo boxes. How can I get the sum of this values to show on my "calcAns_text.text"?
View 6 Replies
Feb 9, 2010
I'm making a game and I need to represent a "layered" circle in some clever datastructure.A circle can have any number of layers. Each layer has a number of "slices", they can be of different lengths and pieces can be missing. The innermost layer is always a full circle.Each segment has a color, multiple segments with the same color can be next to each other. Realistically a circle wont have more than about 40 layers or about 1500 individual slices.I will need to be able to easily find adjacent pieces to a specific piece, see if a piece is "hanging in free air" (imagine gravity towards the center), and to remove pieces leaving a hole in their place.
View 7 Replies
Dec 6, 2005
Just curious to know if its possible. I have a nav that is in flash and will be in many .asp pages. Could a corresponding button in the nav stay highlighted to represent where a user is by detecting what page it is on?
View 5 Replies
Sep 20, 2002
I've created a small application that links various Sound Clips to corresponding Sound variables, and the individual start and stop commands work fine. However, when I try altering the volume, the controls affect all the sounds in the movie. I'd like to refrain from creating separate SWF files to represent each sound, but I will if I have to.
View 1 Replies
Feb 21, 2011
I have datagrid in which some cells (not entire columns) are editable and others are not(all is predefined).what we want to achieve is that to differentiate editable and uneditable cells applying differnet colors.
View 1 Replies
