ActionScript 2.0 :: "reset" Movie Clip To Its Original Position
Jan 6, 2010
I'm working on a project for my class using flash as2. I want it to be able to, when you click on a button, it drops a movie clip down the screen, essentially just adding _y to it, but then when it reaches 300y coordinate it resets the movieclip to its original position so that you can click the button and replay the same function. I'm not sure if this would be create empty movie clip each time you release button. I'm quite lost in this area so i dont have any actionscript to show, I really dont know where to begin. <3
View 9 Replies
Similar Posts:
Aug 30, 2011
I have several movie clips on the stage. They are draggable. I want to be able to drag the movie clip, then when it is dropped, a copy of that movie clip will appear where the first one had been, and the first one will just stay where it is on the screen.
However, I'm running into problems with the syntax.
Here is my current code:
[Code].....
View 14 Replies
Feb 2, 2009
I made two movie clips that follows the mouse but I want to put constraints on them, they should follow the mouse until the mouse reaches a certain distance and then the movie clip should pop back to its original x and y position.
Code:
private function init():void
{
addChild(backgrnd);
[code]....
View 1 Replies
Feb 27, 2010
I created a movie clip, an aircraft compass which rotates till the button is pressed but I would like it to return back to its original position in opposite direction of smooth rotation and stop. I already have the following script on the clip.
onClipEvent(enterframe) {
if(spin) {
_rotation -= 2;
[Code]....
View 2 Replies
Sep 30, 2010
I'm trying to get the handle on a slider to reset to its original position whenever the frame is changed.
View 2 Replies
Sep 9, 2003
I have a clip that rotates to orient itself towards the mouse when the mouse is over a given area. When the mouse leaves the area, the clip snaps back to its original position.
1) the clip snaps directly towards the mouse at the moment the mouse enters the clip; I would like it to actually rotate;
2) the clip snaps directly back to its original position when the mouse leaves the clip; I would like it to ease back into position.
[Code]...
View 3 Replies
Oct 15, 2009
I have a video clip which I initially set a size and location to. I then re-size the clip and move it when a button has been pressed. Once the video has finished playing, the video clip should go back to the original location and size. For some reason though, it goes back to a different location though.[code]...
View 0 Replies
Nov 11, 2009
how can i get original stage x and y position from the embedded movie? ie. main movie(full screen) load in secondary movie, and places it in the middle of the stage. press a button in the secondary movie and new movie clip appears but it has to be full screen and be x0 y0 of the main movie.
View 0 Replies
Dec 8, 2007
I am trying to reset the state of a bitmap back to its original state after I transformed its color.
[Code]...
View 1 Replies
Jun 6, 2007
i have a movie clip that i can zoom and pan, but i am trying to make a reset button that goes to my default position of the mc. I'm thinking about telling the button to place the mc at (0,0) cordinates and scale back to 100%. Am i on the right track? i am using vr. MX, 04.
View 4 Replies
Jun 25, 2009
This is my first time using this forum. I would like to know how to reset the movie clip when two objects touch each other
View 5 Replies
Dec 30, 2011
I have a datagrid that allows user to change and save columns widths and visibility. I'd like to add a reset button that would just reset the datagrid to it's original mxml. This is the original datagrid code.
<mx:DataGrid x="10" y="47" height="159" width="250" dataProvider="{acOffspring}" id="offspring_dg">
<mx:columns>
[Code].....
View 1 Replies
Sep 10, 2008
I added a child (addChild(myCllip) ) and then i change properties of other movieClips inside it then i remove it.
My problem is that when i addChild it again i remains the same when i removed it.
Its there a way to reset the to the original state of the movieClip when i addit again?
View 5 Replies
May 11, 2009
Sounds strange, but let me explain. What the user sees: Loading the page, color swatches fade in and slide over into place, row by row. Once in place, user can drag and drop swatches around, place side-by-side, etc. The script necessary to attach to a button so that all swatches can be reset back into place where they were, and not generate a replay of the initial movie clip from the beginning. (a goto and play is not what I'm looking for) Here's my code so far:
[Code]....
View 2 Replies
Jan 12, 2006
i want to creat a script that if my movie clip is idle for 5 seconds (or some period of time) with out someone moving there mouse over it, that it returns back to the original state.
View 6 Replies
Apr 13, 2011
I have an issue with adding a reset button to my drag and drop movie clips.The problem is, if a student drags a movie clip to a wrong location on the SWF file I want them to be able to hit a reset button that would take them the same SWF that they opened and what would showup would a clear page for them to restart their drag and drop exercise.I know how to make the button for this just want the proper action script to be able for user to start over with no movie clip symbols on the page.
View 3 Replies
Aug 31, 2009
I want to create another button on the main menu of my flash site. I want to take one of the existing buttons (which are set as movie clips) and modify it to show a different menu name and page link. BUT when I go into my library and "duplicate" my movie clip, change the instance name, drag it to the stage and attempt to modify it, the original changes as well. I need to keep the original the same and create a new one with the same code, frames, etc but with different static text. I keep going in circles
View 1 Replies
Oct 17, 2008
im doing a drag and drop quiz in as2, and so far it all works, except the Reset function which is suposed to replace all of the numbers on their original position. Here is the function that at the begining of the frame stores in two arrays the original positions of all the numbers:
Code:
function posInitiale() {
for (j=0; j<=target1.length; j++){[code].....
This, doesnt work, it replaces all of the outside of the scene of flash, if you open the swf bigger you will see them at the bottom of the screen, and they are all on top of each other. But again, if in this function I trace both the arrays I still get the same result, which are the correct position they should go on.
View 2 Replies
Dec 2, 2009
how do i add a movie clip to a button position? i want a button that, when clicked, slides out to a certain position and stop. kinda like a drawer in a desk.
View 1 Replies
Mar 8, 2006
ok - i'm totally confused here... this is probably a stupid noob question... just recently got flash 8 - upgrading from mx2004, but had previously been using flash 6 components and AS1, due to files that had already been written in mx... my problem is this - i have a dynamic text field, populated with data from a LoadVars object. When a button is pressed, different data is loaded into the text field, and the scrollBar is supposed to reset to the top (position=0)
[Code]...
View 2 Replies
Apr 21, 2010
I have a movieclip instance named "ground" i have it set up so that the ground moves constantly to the left as a scrolling BG. what I want is that when the user presses the "space" button, the ground moves down then back up in a a parabolic path. and it does. but I want the movieclip to stop moving vertically(make dy equal to zero) when it returns to its original y position. how can this be achieved?
Code:
package{
import flash.display.*;
[code].....
View 2 Replies
Mar 10, 2010
Do you know how to rewind a tween. but I dont want it to just snap back to the beiginning. I want it to yoyo back to the beingining without actually yoyoing many times. you know what I mean?this is the code I have which make the beginning motion I want:
public function imageSelectR(e:MouseEvent):void {
myTween = new Tween(imageLoaderHost, "z", Regular.easeInOut, 0, -100, 1, true);
myTween.addEventListener(TweenEvent.MOTION_FINISH, imageSelectL);
[code]...
View 2 Replies
Jun 23, 2009
I have implemented a pan and zoom function on my code.Whern I zoom in all components look perfectly rescaled, all shapes and lines.
However my text becomes pixelated and isn't redrawn. Is there a method to make it appear smooth and readable even when I zoom in or move the screen around from its original position?
View 1 Replies
Apr 30, 2003
I'm playing around with mac os x-like dock in flash, but I've got a problem with it. I found this at flashkit.com, see it here. For your convenience i'll post the entire code below (it's quite long though).
Now what i want it to do: if the mouse is not 'on' the menu, i want the buttons to ease back to their original position instead of just spawning there. How can i do this via AS ? The _xscale and _yscale values should also ease back to original state.
Actions applied on the first (and only) frame:
[AS]startDrag ("_root.drag", true);
stop ();[/AS]
Actions applied on the control movieclip:
[AS]onClipEvent (load) {
function checkOffset (coffset) {
if (coffset<-175) {
[code]....
View 2 Replies
Jan 24, 2010
My code in theory works find but for some reason things aren't doing what they're supposed to. Basically I have all my draggable puzzle pieces as movieclips; they start at specific x's and y's on the axis. You drag them to the corresponding hitbox movieclip and it pops into the other specific x and y spot on the axis (otherwise they go back to the first xy spot).
The problem is sometimes the pieces drag and drop fine, but other times when you click the mouse down, they drag, but when you let go, they don't drop! Randomly! They just follow the cursor around, til you click a few times, and then randomly it will drop and not move (when it's supposed to go back to the original xy position).
[Code]...
View 1 Replies
Jun 12, 2010
I am trying to get the position of a movie clip called "Shooter", returned to a variable called spitballYpos.
The movie clip is sitting on frame 6 (labelled "Shooting") of a movie clip called PDFstanding.
The position returns perfectly if I place the .shooter MC on the first frame of PDFstanding, but on frame 6 the variable result just returns "undefined".
What have I missed? If I need to reference the particular frame the 'shooter' movie clip is on, then what is the correct syntax?
Here's my code...
Actionscript Code:
spitballYpos = _root.PDFstanding.shooter._y;
View 1 Replies
Jan 20, 2011
I have two images pulling though an empty movie clip, using the actionscript below. I can't seem to figure out how to position both of them, could anybody shed some light on this? I'm using AS3.
[Code]....
View 1 Replies
May 6, 2005
actionscript and was trying to display a movie clip's x and y positions in dynamic textboxes. I can make them display the mouse's x and y positions but need to get it to say the movie clip's
View 2 Replies
Aug 24, 2009
I am creating a flash presentation for school. I am unable to solve this problem, that keeps on pestering me.The problem is:I am trying to create a touch screen calibration movie clip. The only problem i keep running into is, when i click the calibration touch screen cross, what is the script that allows the change in position of the cross after it has been clicked on?Example:The original cross is orientated on the top left of the screen, after it has been clicked i need it to move to the top right of the screen, then clicked again - bottom right, and again bottom left and finally clicked again to be displayed in the centre
View 1 Replies
Mar 27, 2004
I created an empty movieclip with[code]...
Where in the script can I add the x and y properties for that empty movieclip?
View 3 Replies
