I imported a .mp4 video into Flash, and it works fine. I want to know when the video finished playing, the whole frame will fade out and go to another frame. How can I write the code in AS2?
View 1 Replieshow to do this effect.I have a movie instance named "sparkles_mov" as in internal movie, not loading externally.It's placed multiple times on the stage.I need an AS code for the first frame of the entire stage that makes all instances fade in at a specific frame number (5), last for XXX amount of seconds and then all of the instances to fade out at a specific frame number (70).Is this possible? I have all instances fading in using this AS code placed on the frame that they enter on but the fade out never works, the just abruptly disappear:
Code:
sparkles_mov._alpha = 0;
fadeIn();[code].....
I simply have one FLVPlayback component in the background and a movieclip on the layer above with an FLVPlayback component inside it. The first FLV component is constantly looping a five-second video. So all I need is for the movieclip containing the second FLV component to load the right file, fade in, and when the video ends, fade out. Absolutely all of that works... apart from the fading in. What I noticed was that my movieclip was fading in correctly, but the FLVPlayback component was empty and transparent until the fade had finished - then it played the clip. Here's my code, which gets called at random intervals:
[Code]...
i am trying to hade in and fade out on the sertain frame. but i just can't figure out what's the problem.
ActionScript Code:
var soundFadeInTimer:Timer = new Timer(100,50);
soundFadeInTimer.addEventListener("timer", soundFadeIn);
var fadeInIncr = 5;
function soundFadeIn(e:TimerEvent){
[Code]...
i have one button (enter_btn) inside of one moviclip(enter_mc), and I need to know how to call the button through my frame root?
I use one movieclip only to make a fade in of my button in only one frame of my frame root.
[Code]...
In Flash pro 4 how do I fade out of one keyframe and fade into the next one with a slow transition?
View 1 Replieshow I can fade an audio clip out when I go from, i.e., frame 5 to frame 6?
The reason is that I have my swf playing up to frame 5, where it stops, and allows the audio to continue playing. But, if the user wishes to go to the next part of my swf, i.e. frame 6 to frame 10, where it stops at frame 10 to play the next audio clip, I want the audio from the first section to fade out once the swf gets to frame 6 on the timeline to allow for the next audio clip to play.
Currently, if I proceed to the next part, frames 6 to 10, and the audio from the first part has not finished playing, then both the first audio and the second audio play simultaneously.
I have a loop that starts to play when the movie starts:
var my_sound:SoundId = new SoundId();
var my_channel:SoundChannel = new SoundChannel();
my_channel = my_sound.play(0,int.MAX_VALUE);
I would like to fade it out when the movie enters frame 20. Since I'm already using TweenMax, I put this line in frame 20:
TweenMax.to(SoundId, 1, {volume:0, onUpdate:my_channel, onComplete:stopSound});
I'm getting an error:
1120: Access of undefined property stopSound. TweenMax.to(SoundId, 1, {volume:0, onUpdate:my_channel, onComplete:stopSound});
I'm trying to make a fade in for my FLV video but I am not sure how I can go about doing that in actionscript 3. I was looking over a sample file that has this fade in effect for the video but it was created in actionscript 2. If I put this code in Actionscript 3 and preview the result, I get a bunch of errors. Does anyone here know how I can convert this code from AS2 to AS3. Thank you guys! The flv video I have is titled "fire4.flv". Is there a different scriptcode/approach I can work with in AS3? Here is the code that I have which works in AS2 but not AS3 and an attached fla workfile:
import mx.transitions.*;
var netConnection:NetConnection = new NetConnection();
netConnection.connect(null);[code].....
I can make an animation so the image fades in.http:[url].... the fade is not smooth. I did this by changing the alpha layer 20% every 5 frames. How can I make the fade smooth?
View 1 RepliesWhen a button is clicked on the flash site im creating, which links to the next page, ie about/contact/portfolio etc... I need the current frame movieclip to fadeout, then advance to the next page. This is my code so far
[Code]...
I'm so close to finishing my portfolio site update with an XML gallery and menu. However, I have multiple galleries, about 7-8. With the crazy timeline I have set up now, each gallery is on on its own frame about 20 frames apart, the menu uses a gotoAndPlay to another frame with a 20 frame animation and a stop(); on another gallery frame. What I would like to do is when another gallery is selected from the menu, have the last image of the current gallery fade out. So, what AS would I need to make the movieclip "picture" fade out when the frame is changed? A shoutout to Scotty and Lindquist as well as all the tutorials for making this possible
View 5 RepliesI usually do this with code and timeline, but i need to do this in one frame with only buttons. so for example
btn1.onRelease = function(){
bg_con._alpha = 0;
bg_con.alphaTo(100, 0.5, "linear");
loadBitmapSmoothed("images/bg4.jpg", bg_con);
}
so that fades in nicely, now i need it to fade out when the next button is pressed and then that button fades in and out, etc.
I've created an MC to control the various sounds throughout my flash file. I'm sure this is an ugly way to do things (in AS 2.0) but barring that, here's what I'm trying to do, and what I got at the moment:I need one of several sound clips to play (1-4) depending on a particular frame that's reached. If, during the sound playback, a user clicks a navigation button, I need the sound to quickly fade out (and I'm assuming have the sound object stopped or destroyed to preserve resources?), so my _root mc targets a frame within my SOUND mc and creates the 'standard' sound object:
Code:
VO_mobile = new Sound(mobilesound);
VO_mobile.attachSound("vo_mobile");
[code].....
I'm using the code and assets from this page. [URL] I'm creating ads for websites and they don't allow continual animation after 3 loops. I added to the above code to make it fade at the end. I think I'm close, but it doesn't seem to fade away as I had hoped, it just keeps falling.
Am I missing some code that I need to replace? Do I need to put a frame # somewhere when I want it to fade? Does the last part of the code go on a frame at the end? The snow just keeps falling even though it's reached the last frame. What do I add to make it stop?
Here is the code. The link above will show you exactly the type of animation I'm looking at. I added the fade part after "init ( );"
init = function () {
width = 300;
// pixels
height = 250;
[Code].....
(remove the spaces to correctly link, my post count is too low to include links)
kirupa. com/ developer/flash8/snow. htm
I'm creating ads for websites though and they don't allow continual animation after 1 to 3 loops. What I'm hoping to do is one of the following:
Rather than have an abrupt stop to the snow on the last frame and have them oddly disappear, I'd like to have it stop creating snow on (for example) frame 100 so it's all gone by the last frame (for example) 130.
Here is the code.
init = function () {
width = 300;
// pixels
[Code]....
On a side note, I have the AS code on frame 1 currently, and just to test it out I added a stop(); to the last frame, but the snow kept falling. Do I have to add code to this snow code to get it to stop at a certain frame?
I'm using the code and assets from this page. [URL]. I'm creating ads for websites though and they don't allow continual animation after 1 to 3 loops. What I'm hoping to do is one of the following:
Rather than have an abrupt stop to the snow on the last frame and have them oddly disappear, I'd like to have it stop creating snow on (for example) frame 100 so it's all gone by the last frame (for example) 130. I'm using flash 8, AS2.
Here is the code.
init = function () {
width = 300;
// pixels
height = 250;
On a side note, I have the AS code on frame 1 currently, and just to test it out I added a stop(); to the last frame, but the snow kept falling. Do I have to add code to this snow code to get it to stop at a certain frame?
I'm working on a project for a website, I need to display statistics in a flash video, and as easy as it sounds, I can't get it to work. Basically, I need some text to fade in, and the actual number to count up [from zero to the number]. I managed to get it semi-working, but I can't get the numbers to fade in. I didn't know if there was any easy way to do this without doing it frame by frame.
View 2 RepliesIm a beginner at flash video, and have been using the built in FLV component which I can apply actionscript fades to easily. However I don't seem to be able to use them when I use the better method... NetStream. Here is an example fade:
[Code]...
My issue is: I have a mp3 player running in a movieclip and I want the sound volume to fade off when I press play on a video loaded from Youtube, which is in another movieclip.
In other words, I'd like to toggle the sound on and off when the video is on or off.
The tutorial located at [URL] can it be done with video?
View 14 Repliesi have a pb of memory leak:i using flash.media.video to read video i have function to do frame by frame:FrameBuffer is an Array containing my video frame, lastimg is Bitmap object
[Code]...
I suppose the title says it all. I can load an external video file (FLV) and I can have it play. I also have the custom buttons made to control the clip. The only thing I have left to do is to have the main timeline move onto frame 2 once the external video reaches its end. I am using actionscript 3 and flash cs 5.5.
View 7 Repliesi've recently installed Wowza media server 2 locally, currently only for testing purposes.everything works fine, except of accurate seeking functionality - or in other words advancing frame-by-frame .when i use VLC to play my video file i have no problems advancing frame-by-frame. however, when i use the 'seek()' function to move the playhead a fraction of a second, its seems to move only to the next key frame (meaning that only once every few mouse clicks the playhead advances dramatically).
View 1 RepliesI know how to make a video (instanced as showreel) stop when clicking on a button that that navigates to another section/frame, since otherwise I would still listen to that video while not visible. The problem is when I'm in another frame that doesn't have that video, when clicking on the menu to go to whichever other frame, it looks for that it to stop if it's playing and it and doesn't find it, and so there's an error.
How can solve this? Maybe I should put an order saying something like if there exists a video in that frame instanced as sowreel, stop it, otherwise don't do anything as there is nothing to be stopped. Or assign the order to the frame (which is called motion), but I don't know how to do that, can someone help? The code I have is:
import fl.video.VideoEvent;
function onClick(evt:MouseEvent):void { if( showreel.playing ){ showreel.stop();} gotoAndStop(evt.currentTarget.name);}
motion.addEventListener(MouseEvent.CLICK, onClick);web.addEventListener(MouseEvent.CLICK, onClick);logo.addEventListener(MouseEvent.CLICK, onClick);photo.addEventListener(MouseEvent.CLICK, onClick);
I attached the code here. The problem is after importing the video in the first frame while navigating the video sound is heard which means the video is still playing. How can I stop it when moving to other section. Here is code
[Code]...
I've created a movieclip that is supposed to begin the movie with a rotation (it's a globe) and at a specific frame it should beginning to fade out. I've inserted the folowing code to the rotation and for this action it is working perfectly
Code:
onClipEvent (enterFrame) {
i = getProperty(this,_rotation);
setProperty(this,_rotation,i + 0.5);
}
But, when I try to insert any other line for the _alpha, a sintaxe error occurs and the rotation doesnt works.
i want to make the current page of a website, fade out, using the Transition Manager.
Best i can come up with is
Code:
TransitionManager.start(VARIABLEtoCurrentMovielip, {type:Fade, direction:Transition.OUT, duration:1, easing:Strong.easeOut});
and obviously before that, have it declare the variable, something like
Code:
if { current position = "home"
VARIABLEtoCurrentMovielip = "home_mc"
}
i just have no idea on the syntax. how do i access the current frame, namely the label? (ie how we have a layer that goes "Home" "About" etc) and then take that varaible and drop it in the transition manager string?
Solved HERE: [URL] It's a mashup from two inspirations. Basically I'm using PV3D to add pixels to the scene everyframe and I have an BitmapEffectLayer handling their display. At the moment I am using a ColorMatrixFilter to fade out the pixels each frame and then add new ones. This is great but I also want additive blending (so when many pixels are on top of each other they turn white).
The original 2D version of this basically added the particles color to the original pixel color creating an additive blend. But I can't do that in 3D!!! Once the old pixels have been drawn they go to the BitmapEffectLayerand are rendered in 2D.. but I can go from 2D back to 3D again.. I hope I have explained my problem clearly.. also even if I could my skill doesn't permit me to do it..
i have put a flv video put in a flash cs3 , i want is that when i press i a button ,ofcoure which i will create, movie and sound fade out smootly , rather then movie and sound stops at once, meaning the video fade out smoothly and sound volume slowly,lowers down ,until it is totally silent,what code should i use
View 3 Replies