What I'm trying to do is have a button that when you roll over it, this image gallery I have will appear. I need it to stay after the roll over though and not disappear again
View 2 RepliesOkay, now things are getting a little complicated. I need to build a Flash object that can sit over the corner of an image to serve extra content. It's way beyond my Flash skill level, my work is usually limited to print work in Photoshop and Illustrator so please excuse me if any of the following isn't clear. I am trying to learn though, So this is how it's all supposed to work, along with my issues; When the image & Flash item load a small looping animation will play to draw the eye/show the item as interactive.
When the user rolls over this the corner will peelback. I have a working peelback animation for the rollover, that reacts to mouse over/mouse off, and a looping animation for the initial, but I cannot work out how to make the initial loop until mouseover, then play the peelback when the mouse is over. And go back to the initial animation loop if the user rolls off. (Each of these animations is stored as a movie clip in the Library)
Then it gets more complicated... if the user stays on the corner until it is fully peeled back I need to make a small countdown (sort of a 3, 2, 1 situation) show, before launching a lightbox (would this have to be jQuery, or could it be done in Flash?) in the browser to serve the content.
[Code]...
I have a menu with five items in it. Every menu item is two words, both grey, and is a button. When the button is rolled over the second word goes red. So far, so easy. However, when the button is clicked and sends the timeline to the correct frame label, I want that button to stay in its grey/red state, in other words its rollover state. Is it possible to label a frame inside a button timeline, in the same way as one would in a movie clip, and then send the play head to that?
Or maybe there are some really easy and obvious solutions that I haven't seen that I would be grateful to hear about.
I'm trying to add a section to my little animated buttons so that when you rollover/rollout it plays the rollover/rollout animation... all is fine in that regard however when i want the buton to go to a certain frame after its clicked and STOP (the buttons are semi transparent and there are lots of them so i want the user to remember which buttons they clicked on). so when i made the if code it just stops the animation on a click but dosent play the rollover/out animation!code follows
ActionScript Code:
</p>
<p>stop(); </p>
[code].....
How can I make my on rollover effect stay when it is clicked? So for example if I click on the home button stays highlighted or in this case keeps the on(rollover) frame selected until another link is clicked. An example would be the main nav on [URL]
View 4 RepliesThe animation/rollover works well but it still abruptly stops when I rollover another button. The link below is an example on what I want to accomplish.
View 1 Repliesi am working on a flash project i want to make the clicked button stay on the rollover state in the movie
see the fla file, i am using flash 8 pro
i was thinking to make frame by frame but i have many many buttons
The problem with this version is that i want the clicked button to grow and stay larger than the other buttons. And when you click another button, that button becomes large and the last clicked button gets smaller. I've figured out how to do that, which you will see in a moment, but that is not my problem. Now, with this version I am actually using a proximity formula for the rollovers instead of actual rollOver handlers, and the buttons seem to respond well. Here is the modified version of the nav, using rollOver handlers and growing and shrinking the appropriate buttons:[URL]
As you can see here, this version seems to be working fine as long as you are rolling over the buttons fairly quickly. But, if you put your mouse right on the edge of the button, I think you'll see that the button goes into some sort of pulsing action, larger and smaller. It may stop after a moment or it may not. In an effort to find the problem, i removed each property (alpha,blur,bevel, etc) one at a time and basically figured out that mainly the blur filter is causing the button to act erratically. Without the blur filter, it works just fine.
I'm wondering if anyone else has had this sort of problem and if there is a solution to it (besides getting rid of the blur ). I could go back to using proximity for the rollovers, but i had a hard time keeping the buttons enlarged when you roll away from them. That's why i went back to using onRollOver instead. Sorry for the long and rambling post, but sometimes it's hard to explain certain things in just a few words..
Im looking to create a rollover animation that looks like the one you will find on the 2advanced sites lower navigation bar. Click on the button "view demo reel" for the example.
View 1 Repliesim making a button and on the rollover animation I want to have it splatter paint, only thing is I dont know how to get an image into flash that doesnt look crappy. I know that I need a vector image, but im not familiar with vectors as I usually use photoshop. I tried using a photoshop brush image, a simple paint splatter in which I was just going to tween to a larger splatter but like I said the image looks blurred because itsa bitmap.
another newbie question, but when you make an animated button, is the background included in the animation? Like lets say I import a button, give it an animation to glow on rollover or something, if i went to use that .swf would the background that it was placed on show? or would it just be the animation that shows on the default web browser background.
I was wondering how to create a button that will animate with rollover and rolloff? For example, if I have a box and when you rollover, the box will slide up and a text slides down. and once you roll off, the box will slide back down to its original place and text will slide back up behind the box?
View 8 Repliesrollover play anim issue I am having? this is what I am trying to do:
1. a button that when rolled over animates(working)
2. the button when clicked should play another 'animation' that is placed on the scene(can't get to work)
3.Inside the 'animation' the button plays, there is a 'close' button that should playout the 'anmation' timeline.(not working)not sure what script to attached to the 'close' button .
I have a sequence of images that make up an animation.[code]...
View 13 RepliesI'd like to pause an animation loop when I rollover a button(the button is part of the area that is being animated and I want all the other buttons to stop animating except for the one I rollover) and then start the animation back up again when I rollout.
View 2 RepliesI have 2 simple MCs I am trying to control via rolling over the actual animation itself, not a separate button.
Here's the catch though: In one MC the animation is up and down, the other, left to right. I need the user to be able to not only trigger the animation by rolling over it, BUT, control the up and down/left to right action.
When they move the cursor up and down, the animation follows... you get the idea.
Can this be done with an invisible button covering and on top of the animation?
how the rollover animation on the top navigation buttons was made on this site --> [URL].
View 2 RepliesThis is a project I am working on for my job's website. When you rollover the red dots I want the wave animation to play but I also want words to come up in the blue bar describing the location of that specific dot (e.g. Singapore), but I dont want the wave animation itself to have rollover because that causes problems. Right now the "dot" button has a "hit" area that plays the wave movieclip so the wave doesnt have a rollover property. I tried just adding another rollover property to the whole "dot" movieclip that would display the descriptions, but that made it where the wave mc wouldnt play on rollover. I also want the wave to play out in its entirety, not disappear as soon as you rollout.
View 8 RepliesI am a complete novice in Flash and action scripting, but i'm trying to create a button for a website that simply fades in on roll over and fades out on roll off. I've successfully managed to make the roll over effect work, but i'm struggling to figure out how to reverse the animation on roll off.
View 4 RepliesI created a little news viewer, that when you roll over a button it plays an animation. The problem I am having is:if the mouse moves over the button (the animation starts)
then if the mouse moves off the button and then back over the button before the animation is over the animation snaps back to the first frame.Is there a way to tell flash to ignore this Double rollover until the animation is finished?
I'm trying to get the animation of this actionscript to pause on RollOver and then play again on rollOut, but no luck so far.
Sample file is attached (FLASH 8).
So within my Flash document I have a rollover movieclip that contains a UI scrollbar. My question is, can I modify this rollover script to be active until it reachs a certain frame in the animation and then become inactive so that the scrollbar works? Or, is there some script that I can use to make the UI scrollbar active within the rollover clip?
[Code]...
i have a problem with a rollover animation stopping at it's 'on' state on release. i have a movie clip that fades text up from 0% at keyframe 1 to 100% at keyframe 10 and back down to 0% at keyframe 19. i have an invisible button above this with the following:
[Code]...
the visible bit is to turn off the invisible button on release. the problem is that with the following code, all that happens is the movie plays out from 11 on release. i want it to stop at keyframe 10 (where it is).
I made the animation in the flesh, which to run on a rollover, but when I remove Mouse and repay it back even though the animation is not finished interrupts and start over again to make the animation goes to the end no matter what I returned the mouse on the animationmeans:how to make the animation reaches its conclusion no matter if the mouse back over the animation
View 1 RepliesI'm trying to create flash rollovers for buttons that play the full rollover animation even if you roll of it, and if you stay on it if will play once and not keep repeating. The rollover animation is only short, about 2 seconds, but which ever way I try it I can't get it to play the full clip if you roll off, either that or it will play the full clip but keep repeating if you keep the mouse on it.
At the moment it is just a movieclip in a rollover keyframe of a button.This has stumped me for years. Other sites seem to do it fine (off the top of my head the 4 menu rollovers at the bottom of http:[url].... do it - if you rollover each one left to right in one go they do a kind of Mexican wave) but I just can't see a way of doing it.
below is some code i am using to rewind / play an animaion depending on the rollover state. only ting is i would like to have it so that i could do something like:
playFrames(homeBtn)...
this way i can use the same function over and over but i am not sure how to write this. i think its someting like function playFrames(obj); and then you do something with this...
[Code]...
Im trying to write a global fucntion for button rollOver, rollOut animation.
here's what I have as of right now.
On the root timeline::
stop();
function buttonFade(fade) {
if (fade) {
[Code]....
Im still wishy washy on function syntax..
I'm trying to create a simple interactive animation for a website that consists of three rollover areas on a page. When you mouse over an area, a bit of explanatory text is revealed by animating a mask over some text. The text is left displayed until a mouseover of a different area occurs.Let's call the three mouseover targets A, B, and C.A MOUSE_OVER event listener is registered for all three targets. In the event handler for each, I'm following a pattern like this:
Code:
A.transform.colorTransform = highlighted;
B.transform.colorTransform = notHighlighted;
[code].....
I am designing a map for a project that I am working on. Whenever users hover their mouse above a specific continent, information for that continent is displayed. I have had no problem in doing this but I want to add instructions.Example:Instructions:Hover over a specific continent to view its geographical information.( The user then hovers over a continent)BUT whenever I test it, the information does come up but the instructions are still there which makes a mess of the words.
View 3 RepliesI have a movieclip that shows an animation onRollOver and an animation on RollOut but onRelease the animation enlarge itselfs but now when I'll roll out when the animation isn't open (so i didn't release) the animation plays the animation for the minimizing of the animation. Here's my code (I know its a bit amateuristic but I'm not a programmer )
[Code]....
The script for my timer worked for one button but as soon as I set up the other 2 buttons to do the same, I started having a problem where the rollover action would go after the set amount of time was up but then would repeat itself once after the set amount of time was up again. just to clarify, if it needs it, the reason I don't have a rollout attached to these buttons is because I want the menu to stay out until you leave the menu area
so I have an invisible button called menuin_btn which sits to the right of the menu and covers the rest of the stage where the content will be, so you have to rollover that area for the menu to roll back in. The "rollin" in my code brings the movie clip to frame 16 (the end) where I have a gotoAndStop(1); command to get it back to frame 1 so the rollover can be used again. I've attached a zip with my current flash file and swf and here is what my current script looks like on the main scene:
[Code]...